• 한국산업보건학회지
• /
• 제25권4호
• /
• pp.446-464
• /
• 2015

Objectives: This study was conducted to evaluate the task-specific hazards of chemicals used by nail technicians in Daegu Metropolitan City. Materials: A total of 30 nail shops located in Daegu City were surveyed to investigate the major tasks and practices performed by nail technicians and the ingredients listed in nail care products used in shops. We also collected instructions for use and material safety data sheets(MSDSs) of nail care products and compared CAS Nos. of ingredients with the lists of chemicals regulated by the Industrial Safety and Health Act(ISHA) and Chemical Substances Control Act(CSCA). Results: A total of 125 chemical ingredients were found in 468 nail care products used at the 30 nail shops. The most frequently found ingredients were ethyl acetate(72%), followed by n-butyl acetate(71.8%), isopropanol(56%), benzophenone(51.1%), nitrocellulose(46.4%) and ethanol(45.3%). Comparing six tasks, the task of manicuring used the most products at 222 products containing 91 ingredients. Among the 125 ingredients, there are 31 chemicals with occupational exposure limits(OEL) designated by the Ministry of Employment and Labor(MoEL), eight categorized as carcinogens, one mutagen and two reproductive toxic chemicals. In terms of carcinogens, formaldehyde was identified as the only confirmed human carcinogen(1A). We found that there was one chemical with a permissible limit, one special management substance, 18 workplace monitoring substances and ten special health diagnosis substances regulated by ISHA. For CSCA, nine poisonous substances, six substances requiring preparation for accidents and one restricted substance were identified. Conclusions: Based on these findings, formaldehyde was identified as one of the chemicals that should most strictly be controlled for the protection of the health of nail technicians and customers. At the same time, it is necessary to distribute materials with detailed hazardous information of nail care products for nail shop technicians.

• 한국산업보건학회지
• /
• 제28권4호
• /
• pp.352-364
• /
• 2018

Objective: The Korean Industrial Hygiene Association(KIHA) held a forum on "Improvement of Material Safety Data Sheets (MSDS) regulations for enhancing the effectiveness and efficiency in the field" at its 2018 Winter Conference(February 2, 2018). This article summarized the major consensus opinions developed at the forum. Methods: Since the initial implementation of the MSDS system, the contents of the system have changed and related studies have been reviewed. Before the forum, online questionnaires were developed and opinions on the effectiveness of MSDS program were collected from various strata of the occupational health field. We also summarized the key opinions of companies, trade unions, experts, and government officials as discussed at the forums. Results: A total of 265 opinions were gathered through online questionnaire surveys from safety and health managers, trade unions, government officials, and health professionals. The results of online surveys and discussions showed some differences of opinion, but it was a common perception that the current MSDS system is not working effectively in the workplace. It was considered necessary to strengthen MSDS education and to make it easier for workers to understand and deliver the necessary information. In addition, it was confirmed that the supply of and education on MSDS to small- and medium-sized enterprise workers is not being well executed. In particular, MSDS training for subcontract workers should be carried out under the responsibility of the contracting employer. Conclusions: In order for the MSDS system to serve more effectively in the field in the future, it needs to be improved in terms of the effective education and training considering the type of industry and employment.

• 한국산업보건학회지
• /
• 제32권4호
• /
• pp.340-349
• /
• 2022

Objectives: The importance of MSDS is emphasized for communicating hazardous information due to the increase in the types and usage of chemical substances. The purpose of this study is to assess the reliability of MSDS by collecting and examining paint thinners commercially available in South Korea. Methods: Twenty-five paint thinners were purchased at paint stores and the provision of MSDS was checked. Quantitative and qualitative analysis was performed on the chemical constituents of the thinners using GC-MSD and GC-FID. Reliability was evaluated by the MSDS collection rate for the paint thinners and calculating the rate of matching between laboratory analysis results and the contents and composition of chemical constituents given in the MSDS. Results: Unlike a study conducted in 2006, MSDS were provided for all 25 thinners. As a result of qualitative analysis using GC-MSD, 104 chemical substances were detected. The substances with the highest detection rate were identified in the order of toluene, butyl acetate, acetone, xylene, and ethyl benzene. A component matching rate of 41% was found by comparing the differences between the number of substances detected in laboratory testing and the number of substances listed in the MSDS. Benzene, a carcinogen not listed in the MSDS, was detected in two thinners produced by a small company. The detected benzene contents were 0.039 and 0.040%. When benzene is used, it should be strictly handled according to the Industrial Safety and Health Act. However, since it is not listed on the MSDS, it is judged that benzene was not being managed as a carcinogen in the workplaces where it is used. Conclusions: Since the reliability of MSDS, which play an important role in hazard communication, was evaluated to be low, it is necessary to systematically and continuously secure this reliability. In particular, carcinogens should be managed more strictly.

• 한국산업보건학회지
• /
• 제21권2호
• /
• pp.73-81
• /
• 2011

The purpose of this study was to obtain scientific information regarding classification and health hazards that may result from a 13 weeks inhalation exposure of isoprene in Sprague-Dawley (SD) rats. The testing method was conducted in accordance with OECD guidelines for the testing of chemicals No. 413. The Rats were divided into 4 groups (10 male and 10 female rats in each group) and exposed to 0, 360, 1,620, 7,300 ppm isoprene in each exposure chamber for 6 h/day, 5 days/week, for 13 weeks. As a result, there were no mortality or abnormality during the period of study and did not show any significant changes of body weight. There were no dose response changes in urinalysis, hematological and serum biochemical value examination. Relative organ weight was increased significantly the right kidney in 7,300 ppm group of male rats. In female rats, relative organ weight of the left kidney and the both lungs in 1,620 ppm group and the left lung and the both kidneys in 7,300 ppm group were increased significantly. But the histopathological findings did not reveal any exposure-related changes. According to the above results, the no observable adverse effect level (NOAEL) of isoprene was 7,300 ppm (20.3 mg/L) in both male and female rats. In conclusion, Isoprene was not classified specific target organ toxicity of the 'Standard for Classification and Labeling of Chemical Substance and Material Safety Data Sheet' (Ministry of Employment and Labor, 2009).

• 한국산업보건학회지
• /
• 제22권4호
• /
• pp.316-328
• /
• 2012

Objectives: This study was designed to provide the information regarding chemicals classification and health hazard by evaluating the toxicological effect through repeated inhalation exposure of methyl acrylate(MA) in Sprague-Dawley(SD) rat for 13 weeks. Methods: According to the notification with Ministry of Labor(No. 2009-68) and OECD Test Guideline 413, the rats were exposed to MA at concentration of 0, 56, 168, 280 ppm via whole body inhalation for 6 hours per day, 5 days per week, for 13 weeks. All animals were observed for mortality, morbidity and the change of body weight and food consumption were determined during the exposure period. Necropsy finding, organ weight, hematology, clinical biochemistry and histopathological examination following exposure were also performed. Results: There were no death and abnormal clinical signs relate to exposure MA. However, At 160 ppm and 280 ppm exposure groups, body weight and food consumption showed statistically significant decrease and histopathological changes in lung, trachea, nasal cavity, larynx were observed. Conclusions: MA was mainly affected respiratory tract. It is consequently provided to be classified as category 2(0.2 mg/L/6h < category 2 ${\leq}$ 1.0 mg/L/6h) for specific target organ toxicity following repeated exposure according to Standard for Classification and Labeling of Chemical Substance and Material Safety Data Sheet. The NOAEL(no observable adverse effect level) of MA was also determined to be lower than 56 ppm.

• 한국산업보건학회지
• /
• 제11권3호
• /
• pp.179-189
• /
• 2001

This study was performed to identify the current status of work environment management and to provide appropriate recommendations for small scale industry with less than 5 workers from September, 2000 to October, 2000 in Seoul city and Gyoung-gi province. The 211 companies were surveyed by checklist included the elements of management of work environment, hazardous chemicals, MSDS, personal protective equipment, and ventilation system. The proportion of metal products manufacturing and printing industries are 25.6 % and 22.3%, respectively. The daily working hours in printing industry is longer than others. The industries that produce potentially hazardous agents, such as noise, dust, metal, organic solvents, radiation and chemical material are pulp, plating, machinery, and printing, respectively. In above industries, only 2.8 % of those recognised and had MSDS. The proportion of companies providing fire extinguishers, safety showers are found to be 13.3 %, 7.1 %, respectively. Only 24.2 % of companies provided personal protective equipment to the workers. The ventilation system was operated in most of companies. But local exhaust ventilation system is provided to 22.3 % of those, also had not been annually inspected. This study showed that the current status of occupational safety and health was not appropriate for workers in small scale industries. It is suggested that annual physical examination have to be performed, MSDS usage must become widespread, and employer and emplyees in small scale industry should be educated for the treatment and storage of hazardous chemicals to improve the occupational safety and health of the working environment. also, regulatory standard has to be applied to local exhaust ventilation system in small scale industry to improve the working condition.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.7-12
• /
• 2008

A hot stamping technology of vehicle door impact beam made of thin sheet steel has been developed, with the aim of ensuring occupant safety in a side collision. This technology has been implemented to increase the strength of vehicle body parts and to reduce not only the weight of door impact beam but also the number of work processes. Mechanical tests were performed to obtain material properties of hot-stamped specimen and those were used as input data in stamping and structural simulation for optimal design of door impact beam. Strength of hot-stamped door impact beam increased to the value 102% higher than that of conventional pipe-shaped door impact beam and structural simulation showed that hot-stamped door impact beam achieved 28% weight reduction.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 춘계학술대회 논문집
• /
• pp.36-37
• /
• 2000

도장시설은 현재 미국, 유럽, 일본 둥을 포함하여 세계적으로 유기용제를 가장 많이 사용하고 있는 시설중의 하나로 휘발성유기화합물질의 배출원으로 가장 큰 부분을 차지하고 있는 시설이다. 국내에서 도장시설에서의 휘발성유기화합물질의 배출량산정에 관한 구는 미국의 배출계수자료(AP-42)중 도료에 대한 배출계수값과 국내의 도료사용량에 근거하여 몇몇 연구기관에서 산정한 바 있으나, 도장시설을 각 공정별로 구분하고 각 공정에서 사용된 도료중 유기용제의 양을 MSDS(Material Safety Data Sheet)자료등을 활용하여 비교적 구체적으로 배출계수 및 배출량을 산정한 경우는 없었다.(중략)

• 한국산업보건학회지
• /
• 제25권4호
• /
• pp.506-515
• /
• 2015

Objectives: This study was conducted to evaluate the status of hazard communication regarding dental materials among dental hygienists in the Daegu Metropolitan City and the North Gyeongsang-do Province area. Materials: A total of 310 dental hygienists were surveyed using self-administered questionnaires to investigate the status of hazard communication on dental materials and information needs. We collected instructions for use and material safety data sheets(MSDSs) for 67 dental materials frequently used at dental hospitals located in the Daegu Metropolitan City and the North Gyeongsang-do Province area. Results: The questionnaire surveys showed that only 11% of the 310 dental hygienists had knowledge of MSDS and 46.8% of respondents never read instructions for use before using materials. Just 7.4% of dental hygienists have undergone training on hazard information for dental materials. In particular, dental hygienists working at dental clinics had significantly lower response rates on knowledge of MSDS(p<0.001), reading of instructions for use(p=0.042) and training on the hazard information of dental materials(p=0.004) than those in dental hospitals or general hospitals. The essential information most desired by dental hygienists was hazard identification(82.3%) followed by first-aid measures(53.9%), handling and storage(51%), disposal considerations (49%) and toxicological information(47.1%). All dental materials were on foreign products which came from Japan(59.7%), the USA(26.9%) and Liechtenstein(13.7%). In terms of usage, 56.7% of dental materials were prosthetic, followed by conservation(31.3%), orthodontics(9%), and prevention(3%). We found that dental hygienists had accessed MSDSs for only five dental products among the 67 dental materials. The instructions for the use of the 67 dental materials provided hazard identification(64.2%), first-aid measures(83.6%), handling and storage(97%), disposal considerations(20.9%) and toxicological information(26.9%). Conclusions: Based on the results of this study, the hazard communication system for dental hygienists working at dental clinics should be improved.

• Safety and Health at Work
• /
• 제8권2호
• /
• pp.143-150
• /
• 2017

A huge number of chemicals are produced and used in the world, and some of them can have negative effects on the reproductive health of workers. To date, most chemicals and work environments have not been studied for their potential to have damaging effects on the workers' reproductive system. Because of the lack of information, many workers may not be aware that such problems can be related to occupational exposures. Newly industrialized countries such as Republic of Korea have rapidly amassed chemicals and other toxicants that pose health hazards, especially to the reproductive systems of workers. This literature review provides an overview of peer-reviewed literature regarding the teratogenic impact and need for safe handling of chemicals. Literature searches were performed using PubMed, Google Scholar, and ScienceDirect. Search strategies were narrowed based on author expertise and 100 articles were chosen for detailed analysis. A total of 47 articles met prespecified inclusion criteria. The majority of papers contained studies that were descriptive in nature with respect to the Medical Subject Headings (MeSH) terms and keywords: "reproductive and heath or hazard and/or workplace or workers or occupations." In the absence of complete information about the safe occupational handling of chemicals in Republic of Korea (other than a material safety data sheet), this review serves as a valuable reference for identifying and remedying potential gaps in relevant regulations. The review also proposes other public health actions including hazard surveillance and primary prevention activities such as reduction, substitution, ventilation, as well as protective equipment.