• 한국정밀공학회지
• /
• 제25권4호
• /
• pp.61-68
• /
• 2008

Of the seven base units of the international system of units, only the kilogram is still defined in terms of a material artifact. One of the experimental approaches opening the way to a new definition of the kilogram is the watt balance To improve the performance of the NPL watt balance, we need to quantify and reduce hysteresis effects in the balance knives. In this paper, we discuss the mechanical characteristics of the knife edges used in the NPL watt balance. The hysteresis mechanism is analyzed using the finite element method. It is found that the cause of hysteresis is not normal stress but shear, and the deformation of the flat, rather than the knife, is an important factor in the hysteresis mechanism. The study presented here, using finite element analysis, suggests that parameters such as material property, tip radius and knife straightness can be more important than others, such as friction coefficient, tip angle, etc.

• 한국주조공학회지
• /
• 제15권5호
• /
• pp.477-482
• /
• 1995

A computer simulation model of various smelting process for melting waste sand was developed by using energy and material balance concept. This model can predict the coal, flux and oxygen consumption and the volume and temperature of off-gas. The major critical variables for smelting process can be explained by using the analysis of energy and material balance. The major conclusions were as follows; 1. The most important variables for smelting process were high post-combustion ratio, high heat transfer efficiency and refractory protection technology. 2. For saving energy in this smelting process, selection of raw materials i.e coal, flux are very important, espacially using of low volatile coal is very profitable. 3. The treatment cost of waste sand is high and environmental restriction is severe, in this reason we must be concerned in the treatment of waste sand by smelting process.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.73-76
• /
• 2009

LCA is nowadays getting popular as a tool to assess the environmental impacts. We can assess the environmental impacts of products and also compare the environmental performance between products with LCA. Furthermore, the LCA results can be used for designing eco-friendly products. But LCA needs an enormous amount of data collection, calculations of energy and material balance. which required to spend pretty much time and cost. However, If we use Input-Output Analysis, There is a lot of advantages that we can save time and cost to calculate and also analyze energy-material balance more comprehensively. Therefore, we implemented the fundamental research of the environmental impact assessment on railway system using life cycle inventory analysis and Input-Output Analysis method.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1996년도 사용종료 매립지의 안정화 에 관한 국제 세미나
• /
• pp.97-101
• /
• 1996

Municipal and sanitary landfills can pose environmental problems due to leachate, landfill gas md unstable geotechnical properties. Most governmental bodies delay the correction of landfill problems or landfill replacement until a crises stage is reached. The replacement of a landfill is often made difficult due to costly regulatory controls, public opposition to siting and the high cost of closure for the previous landfill unit. Solutions to extending landfill life and capacity Involve waste minimization by recycling, refuse compaction and waste-to-energy incineration. Incineration can reduce the volume of refuse by 50-95%. The largest installed bases of municipal waste Incinerators are located in Japan and the U.S. The volume of waste contained in a landfill can be estimated by load count tabulations, weight-and-volume measurements or a material balance analysis based on the trash profile of user categories. for an existing landfill, core samples may be collected and analyzed for use in a material balance analysis. Newly generated refuse contains approximately 50% of the heating value of coal. However, landfill properties vary significantly due to the waste profile of the contributors and biodegradation due to time and weathering. The volume of the Nanji-do landfill

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.209-210
• /
• 2018

• 유기물자원화
• /
• 제29권4호
• /
• pp.77-86
• /
• 2021

본 연구에서는 유기성폐자원에너지 인센티브제도의 기초자료로 활용하고자 음식물폐기물, 음폐수 및 다양한 유기성폐기물이 처리되는 혐기소화조의 운영방식의 물질수지와 에너지수지 산정 결과를 통하여 에너지효율을 평가하고자 한다. 바이오가스화 시설 11개소의 물질수지 분석 결과 유기성폐기물을 제외한 반입물 중 공정수 21.1%, 시상수 25.7 % 다량 투입되는 것을 확인하였다. 그에 따라 연계처리수의 전체 유출물의 87.6 %를 차지하였다. 또한 총 유입물량의 15.7 %가 바이오가스로 전환되며, 총고형물(TS)가 평균 22 %임을 감안할 때 평균 75 %의 물질 전환율을 확인하였다. 에너지수지 분석 결과, 유입물의 잠재에너지 대비 바이오가스 열량을 분석하여 에너지 전환율은 평균 78.5%을 확인하였다. 바이오가스를 생산하기 위한 외부에너지원을 포함한 바이오가스 생산효율은 평균 69.4 %이며, 미이용된 유출에너지를 적용한 바이오가스 플랜트 효율은 평균 58.9 %로 나타났다.

• 청정기술
• /
• 제9권2호
• /
• pp.87-100
• /
• 2003

본 연구는 청정생산기술의 개념을 염색가공분야에 도입시키기 위한 방법론을 제시한 것이다. 먼저 각 분야별 전문가로 이루어진 진단지도팀을 구성하여 대상업체에서 진행중인 제조공정 진행상태를 파악하고 사용하는 원부자재의 성능 및 환경적 분석과 폐수의 환경적 분석을 실시하였다. 원부자재(조제 및 염료)의 환경성은 TOC, CODMn, CODCr, $BOD_5$의 항목으로 평가하였고, 발생되는 폐수는 TOC, CODMn, CODCr, $BOD_5$, TDS, pH의 항목으로 평가하였다. 또 물질수지 분석과 LCA 평가 후 다음 단계로 공정, 에너지, 원부자재, 생산관리, 일반관리에서의 문제점을 도출한 후 그 중에서 개선 대상을 선정하고 마지막 단계에서 각 부분에 대해 지도하여 개선토록 한 후 최종 개선 효과를 분석하였다.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.399-409
• /
• 2003

The first esterification reactor in the continuous polymerization of poly(ethylene terephthalate) has been analyzed by solving the material balances for the two-phase system with respect to the solubility of terephthalic acid. The Newton-Raphson method was used to solve the material balance equations instead of the Simplex method that is frequently used for finding a minimum point of a residual rather than a solution of an equation. A solution for the material balance equations, with the constraint of non-zero liquid phase fraction, could not be obtained with the solubility data of Yamada et al., but could be obtained with solubilities over a minimum value that is larger than their data. Thus, the solubility data of Yamada et al. are considered to be too small. On the other hand, the solubility data of Baranova and Kremer are so large that they gave a solution with the liquid phase only. Based on our results, several typical solubility curves satisfying the constraint of a non-zero liquid phase fraction are suggested in this study; we studied the reaction characteristics of the system using these curves. A higher temperature and a lower pressure are preferred for reducing the content of diethylene glycol.

• Transactions on Electrical and Electronic Materials
• /
• 제15권3호
• /
• pp.144-148
• /
• 2014

The purpose of this research is to utilizing the Tetrax$^{(R)}$ balance measuring instrument in order to analyze the postural balance of males and females in their 30 s diagnosed with chronic lower back pain who have followed a 12-week rehabilitation exercise program. The research also examines the effects on any change in back pain level. In terms of the variables in this research, postural balance (left/right, front/back, postural balance) and pain level change (0~100 mm) were measured. Pre-/post-experimental differences were assessed using the paired-t test. In addition, to identify any gender gap, we set the preliminary scores as a covariate and ran the Analysis of Covariance. Statistical significance (a) herein was set at 0.05. As a result of this research experiment, the left/right, front/back, and overall postural balance were found to increase in both the male and female cases, but with no statistical significance or gender gap. However, both males and females showed a significant decrease in their back pain levels. These findings demonstrate the necessity of continuing clinical research based on the Tetrax$^{(R)}$ equipment for scientific evaluation of the effects of rehabilitation exercises on chronic lower back pain patients and their balancing ability.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.549-554
• /
• 2003

The purpose of this paper is to investigate the solder properties by the change of P mass percentage. Tension test, wetting balance test, spread test, and analysis of intermetallic compound after isothermal aging of Sn-2.5Ag-0.7Cu-0.005P, Sn-2.5Ag-0.7Cu-0.01P, Sn-2.5Ag-0.7Cu-0.02P, Sn-0.7Cu-0.005P were performed. Adding P in the solder alloys resulted in improvement of tensile strength, reduction of intermetallic compound growth, reduction of oxidization in fusible solders under wave soldering. After comparing solder alloy containing P with tin-lead eutectic solder alloy, P contained solders alloys showed much better solder properties than eutectic solder alloy. Furthermore, this solder alloy presented remarkable properties than any other lead-free solder alloy.