• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.5
• /
• pp.472-481
• /
• 1992

In this paper, we proposed a method of segmenting speech signal by neural network and its validity is proved by computer simulation. The neural network Is composed of multi layer perceptrons with one hidden layer. The matching accuracies of the proposed algorithm are measured for continuous vowel and place names. The resulting average matching accuracy is 100% for speaker-dependent case, 99.5% for speaker-independent case and 94.5% for each place name when the neural network 1,; trained for 6 place names simultaneously.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.169.2-169
• /
• 2001

In this paper, we propose the face recognition system using the neural network. A difficult procedure in constructing the entire recognition systems is the feature extraction from the face imga. And a key poing is the design of the matching function that relates the set of feature values to the appropriate face candidates. We use the length and angle values as feature values that are extracted from the face image normalized to the range of [0,1]. These features values are applied to the input layer of the neural network. Then, these multi-layered perceptron learns or gives otput result. By using the neural network we need not to design the matching function. This function may have nonlinear attributes considerably and would be ...

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.4
• /
• pp.17-24
• /
• 2014

In this paper, we propose a CMOS FM RX front-end structure with an automatic tunable input matching network and implement it using a 65nm CMOS technology. The proposed FM RX front-end is designed to change the resonance frequency of the input matching network at the low noise amplifier (LNA) according to the channel frequency selected by a phase-locked loop (PLL) for maintaining almost constant sensitivity level when an embedded antenna type with high frequency selectivity characteristic is used for FM receiver. The simulation results of implemented FM front-end show about 38dB of voltage gain, below 2.5dB of noise figure, and -15.5dBm of input referred intercept point (IIP3) respectively, while drawing only 3.5mA from 1.8V supply voltage including an LO buffer.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.141-146
• /
• 2009

In this paper, a novel harmonic control circuit has been proposed for the design of high-efficiency power amplifier with Si LDMOSFET. The proposed harmonic control circuit haying the short impedances for the second- and third-harmonic components has been used to design the in/output matching network. The efficiency enhancement effect of the proposed harmonic control circuit is superior to the class-F or inverse class-F harmonic control circuit. Also, when the proposed harmonic control circuit has been adapted to the input matching network as well as the output matching network, the of ficiency enhancement effect of the proposed power amplifier has increased all the more. The measured maximum power added efficiency (PAE) of the proposed power amplifier is 82.68% at 1.71GHz band. Compared with class-F and inverse class-F amplifiers, the measured maximum PAE of the proposed power amplifier has increased in $5.08{\sim}9.91%$.

• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.34-46
• /
• 2023

A growing number of large scale knowledge graphs raises several issues how knowledge graph data can be organized, discovered, and integrated efficiently. We present a novel semantic-based mashup platform for contents convergence which consists of acquisition, RDF storage, ontology learning, and mashup subsystems. This platform servers a basis for developing other more sophisticated applications required in the area of knowledge big data. Moreover, this paper proposes an entity matching method using graph convolutional network techniques as a preliminary work for automatic classification and discovery on knowledge big data. Using real DBP15K and SRPRS datasets, the performance of our method is compared with some existing entity matching methods. The experimental results show that the proposed method outperforms existing methods due to its ability to increase accuracy and reduce training time.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1760-1762
• /
• 2002

In this work we develop an equivalent circuit model of TCP(transformer coupled plasma) source and investigate matching characteristic. The developed circuit model includes transmission line, standard-type impedance matching network and displacement current in the plasma source. The impedance of TCP is calculated by previously developed program for various source parameters and dependance of components of matching impedance on the value of source impedance is investigated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.1
• /
• pp.19-26
• /
• 1987

The broadband microwave amplifier in the 3~4GHz frequency range has been designed by using potentially unstable GaAs FET. Input matching network is designed by 14dB available power gain circles which are in the stable region. In order to obtain maximu, transducer power gain, output matching network which is in the stable region can be designed using Fano's bandpass matching network. The measured values of transducer power gain, $S_11$and $S_22$ show close agreements with the theoretical valuse.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.4
• /
• pp.192-197
• /
• 2009

This paper presents the design and measurement of a 2.4/5.2-GHz dual band VCO with a balanced frequency doubler in $0.18\;{\mu}m$ CMOS process. The topology of a 2.4 GHz VCO is a cross-coupled VCO with a LC tank and the frequency of the VCO is doubled by a frequency balanced doubler for a 5.2 GHz VCO. The gate bias matching network for class B operation in the balanced doubler is adopted to obtain as much power at 2nd harmonic output as possible. The average output powers of the 2.4 GHz and 5.2 GHz VCOs are -12 dBm and -13 dBm, respectively, the doubled VCO has fundamental harmonic suppression of -25 dB. The measured phase noises at 5 MHz frequency offset are -123 dBc /Hz from 2.6 GHz and -118 dBc /Hz from 5.1 GHz. The total size of the dual band VCO is $1.0\;mm{\times}0.9\;mm$ including pads.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.85-91
• /
• 2017

This paper concerns the design of a matching module system enabling the RF signal to be harmonized between the new base stations (RRH) and the repeater in the same frequency band of the asynchronous transfer network. This matching system controls the RF Gain Control of the module while monitoring the quality of the quality. Additionally, the RF environment has been adapted accordingly to adjust the RF Gain Control to match the receiver characteristics of the relay. As a result of this study, we improved the quality of the interface between the new base stations and existing relays.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.568-578
• /
• 2016

A wireless power transfer (WPT) system is usually classified as being of either a two-coil or four-coil type. It is known that two-coil WPT systems are suitable for short-range transmissions, whereas four-coil WPT systems are suitable for mid-range transmissions. However, this paper reveals that the two aforementioned types of WPT system are alike in terms of their performance and characteristics, differing only when it comes to their matching-network configurations. In this paper, we first find the optimum load and source conditions using Z-parameters. Then, we estimate the maximum power transfer efficiency under the optimum load and source conditions, and we describe how to configure the matching networks pertaining to both types of WPT system for the given optimum load and source conditions. The two types of WPT system show the same performance with respect to the coupling coefficient and load impedance. Further, they also demonstrate an identical performance in the two cases considered in this paper, that is, a strong-coupled case and a weak-coupled case.