• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1862-1867
• /
• 1999

In wireless ATM system, powerful FEC code is required for highly reliable data transmission. In this paper, we propose an adaptive hybrid ARQ scheme using RCPSCCC for WATM system. The code rate of RCPSCCC is adjusted to match channel conditions and data types. By using only the effective free distances of outer and inner encoders, we derive upper bounds of the bit and word error probabilities over Rayleigh and Rician fading channels. By applying RCPSCCC to the adaptive hybrid ARQ protocol, highly reliable data transmission can be achieved.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.480-488
• /
• 2009

Cooperative transmission is an effective solution to improve the performance of wireless communications over fading channels without the need for physical co-located antenna arrays. In this paper, selection combining is used at the destination instead of maximal ratio combing to optimize the structure of destination and to reduce power consumption in selective decode-and-forward relaying networks. For an arbitrary number of relays, an exact and closed-form expression of the bit error rate (BER) is derived for M-PAM, M-QAM, and M-PSK, respectively, in both independent identically distributed and independent but not identically distributed Rayleigh fading channels. A variety of simulations are performed and show that they match exactly with analytic ones. In addition, our results show that the optimum number of relays depend not only on channel conditions (operating SNRs) but also on modulation schemes which to be used.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.426-445
• /
• 2012

Conventional rate control (RC) schemes for H.264 video coding usually regulate output bit rate to match channel bandwidth by adjusting quantization parameter (QP) at fixed full frame rate, and the passive frame skipping to avoid buffer overflow usually occurs when scene changes or high motions exist in video sequences especially at low bit rate, which degrades spatial-temporal quality and causes jerky effect. In this paper, an active content adaptive frame skipping scheme is proposed instead of passive methods, which skips subjectively trivial frames by structural similarity (SSIM) measurement between the original frame and the interpolated frame via motion vector (MV) copy scheme. The saved bits from skipped frames are allocated to coded key ones to enhance their spatial quality, and the skipped frames are well recovered based on MV copy scheme from adjacent key ones at the decoder side to maintain constant frame rate. Experimental results show that the proposed active SSIM-based frameskip scheme acquires better and more consistent spatial-temporal quality both in objective (PSNR) and subjective (SSIM) sense with low complexity compared to classic fixed frame rate control method JVT-G012 and prior objective metric based frameskip method.

• Journal of the Korean Regional Science Association
• /
• v.10 no.1
• /
• pp.39-52
• /
• 1994

This paper primarily aims to analyze the growth rate differentials of the economic activities in chung-Nam area. The research has been undertaken to find out the potentials of the economic activities and economic bases in the area. To analyze the economic potentials of the industries, the study employed the economic Growth Rate Differential Analysis by Henderson which is revised form of Shift-Share Analysis Methods. The research employed the employment data according to the standardized two-digit-classification-system during the period of 10 years from 1981 through 1991. The Growth Rate Differential Analysis calculates Total Growth Differentials which are dicomposed into two parts: Weight Part and Rate Part. Total Growth Differential can be calculated as the difference between national growth rate and regional growth rate by industry. The foundings are as follows: First, the economic bases of Chung-Nam area were found to be very weak, largely depending on primary industries such as agriculture and fisheries. Second, there was a great decline in urban industries in Tae Joeon, Cheon An and other cities over period of 1971-1981. It is strongly recommended that the planned items and products of each industrial complex must be reorgnized in a fashion to match those with high competitive power found in this research.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.4
• /
• pp.168-180
• /
• 2000

In the Part I, the three dimensional model testing with NNW deep water wave direction gave the results such that the occurrence of breaking waves over the peak of Ear-Do caused very small wave height at the structure position. But the measured wave forces were rather greater than the calculated forces based on deep water wave height. Furthermore, It was also perceived that the time series of the forces looked like corresponding to the case that waves were superimposed by an unidirectional current. In the present Part II, the current is presumed to be a flow secondly induced by breaking waves, and an extensive study to clarify the current in a quantitative sense is performed through numerical analysis and hydraulic experiment. The results showed that a strong circulation can surely occur in the vicinity of the structure due to radiation stress differentials given by the breaking waves. It was also recognized that the velocity of the induced current varied with the magnitude of energy dissipation rate introduced in the numerical analysis. The numerical analysis was tuned adjusting the dissipation rate so that the calculated wave field could closely match with the experimental results of Part I. The fluid force (in prototype) for the optimal match showed approximately 2.2% increased over the calculated value based on the deep water wave height (24.6m) whereas the force corresponding to the average of the experimental values showed the increase of about 13.0%.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.101-104
• /
• 2022

Mist-CVD is known to have advantages of low cost and high productivity compared to ALD and PECVD methods. It is capable of reacting to the substrate by misting an aqueous solution using ultrasonic waves under vacuum-free conditions of atmospheric pressure. In particular, Ga₂O₃ is regarded as advanced power semiconductor material because of its high quality of transmittance, and excellent electrical conductivity through N-type doping. In this study, Computational Fluid Dynamics were used to predict the uniformity of the thin film on a large-area substrate. And also the deposition pattern and uniformity were analyzed using the flow velocity and particle tracking method. The uniformity was confirmed by quantifying the deposition cross section with an FIB-SEM, and the consistency of the uniformity prediction was secured through the analysis of the CFD distribution. With the analysis and experimental results, the match rate of deposition area was 80.14% and the match rate of deposition thickness was 55.32%. As the experimental and analysis results were consistent, it was confirmed that it is possible to predict the deposition thickness uniformity of Mist-CVD.

• Journal of the Korean Society for information Management
• /
• v.24 no.4
• /
• pp.53-72
• /
• 2007

This study is designed to assess whether storyboard surrogates are useful enough to be utilized for indexing sources as well as for metadata elements using 12 sample videos and 14 participants. Study shows that first, the match rates of index terms and summaries are significantly different according to video types, which means storyboard surrogates are especially useful for the type of videos of conveying their meanings mainly through images. Second, participants could assign subject keywords and summaries to digital video, sacrificing a little loss of full video clips' match rates. Moreover, the match rate of index terms (0.45) is higher than that of summaries (0.40). This means storyboard surrogates could be more useful for indexing videos rather than summarizing them. The study suggests that 1)storyboard surrogates can be used as sources for indexing and abstracting digital videos; 2) using storyboard surrogates along with other metadata elements (e.g., text-based abstracts) can be more useful for users' relevance judgement; and 3)storyboard surrogates can be utilized as match sources of image-based queries. Finally, in order to improve storyboard surrogates quality, this study proposes future studies: constructing key frame extraction algorithms and designing key frame arrangement models.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1289-1294
• /
• 2003

This paper proposes a novel and efficient intelligent digital redesign technique for a Takagi-Sugeno (TS) fuzzy system. The term of intelligent digital redesign involves converting an existing analog fuzzy-model-based controller into an equivalent digital counterpart in the sense of state matching. In this paper, we suggest the discretization method based on the dual-rate sampling approximation is first proposed, and then attempt to globally match the states of the overall closed-loop TS fuzzy system with the pre-designed analog fuzzy-model-based controller and those with the digitally redesigned fuzzy-model-based controller. To show the feasibility and the effectiveness of the proposed method, a computer simulation is provided.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.129-132
• /
• 2003

This paper proposes a novel and efficient intelligent digital redesign technique for a Takagi-Sugeno (TS) fuzzy system. The term of intelligent digital redesign involves converting an existing analog fuzzy-model-based controller into an equivalent digital counterpart in the sense of state matching. In this paper, we suggest the discretization method based on the dual-rate sampling approximation is first proposed, and then attempt to globally match the states of the overall closed-loop TS fuzzy system with the pre-designed analog fuzzy-model-based controller and those with the digitally redesigned fuzzy-model-based controller. To show the feasibility and the effectiveness of the proposed method, a computer simulation is provided.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.210-216
• /
• 1998

The most important thing to consider in cold store design are to save cooling energy consumption and to keep goods freshly. Specially there are many efforts to save energy with cold store in Korea. A building energy simulation program should be used to optimally select a cooling system to match the criteria of cooling rate and storage rate in a given cool crop storage building and HVAC system. The low maintenance costs, high degree of safety and environmental impacts are also favouring the underground solution. There are obviously a lot of possibility for cost-effective storage of cooled or frozen goods or liquids in ground water rock.