• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.431-439
• /
• 2017

Since the power transmission line(PTL) passes through the high mountain and heavy snowfall region, it is necessary to keep the stability of the PTL. In this study, PTL is modeled as a mass-spring-damper system by using RecurDyn. The lumped mass model is verified by calculated from the simulation comparing the deflection analysis according to the sag and tension. In order to analyze the dynamic behavior of PTL, a damping coefficient for a multi-body model is derived by using the free vibration test and Rayleigh damping theory. Sleet jump simulation according to the region is performed. The maximum jump height, icing sag and amount of jump are confirmed. Also, the amount of jump and the reaction force at the supporting point according to the tension and load of ice are analyzed, respectively. As a result, it is noted that the amount of jump and reaction force are influenced more by the load of ice than by the tension of PTL.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1942-1949
• /
• 2004

SLA(Scanned Linear Array) is a portable display unit for implementing next-generation virtual realities, utilizes a design that light generated by a line of LEDs is reflected from the rapidly oscillating mirror to generate a raster display. Reaction forces generated by the motions of the mirror and counter-balance mass cancel each other at the device base, reducing vibration. Metal leaf springs have been extensively applied in such portable units. Magnetic springs have been developed and adopted that can replace the metal spring and can avoid many disadvantages of metal springs. We model and analyze the dynamics of the structure with magnetic springs and present the simulation and experimental analysis results, which can be utilized for identifying and eliminating possible problem sources in removing shaking forces and moments, and oscillating the mirror at the required amplitude and frequency. Finally, we present the improved novel magnetic actuator model which can be applied in portable display units.

• 한국컴퓨터그래픽스학회논문지
• /
• 제15권3호
• /
• pp.1-9
• /
• 2009

최근 역감, 촉감 피드백을 생성할 수 있고 3 차원 상호작용이 가능한 컴퓨터 인터페이스 기술이 발전하면서 기존의 입출력 장치에 의존하던 컴퓨터 시뮬레이션의 한계가 줄어들어 그 종류가 다양해지고 있다. 특히, 가상현실 기반 수술 시뮬레이터의 수요가 증가 하면서 사실적인 가상환경을 제공하는 방법에 관련된 연구가 활발히 진행 되고 있으며 그 중에서 가상 장기 모델의 사실적인 표현 기술은 사용자의 몰입감을 높여주는데 중요한 역할을 하기 때문에 반드시 필요한 분야이다. 가상 장기 모델의 사실성을 높이기 위해서는 사용자의 상호작용에 따라 변형되는 시각적 피드백과 알맞은 햅틱 피드백을 전달해야한다. 본 연구에서는 이 두 가지 피드백은 사람이 인지하는 방법과 시스템의 요구 사항이 다르기 때문에 보다 효과적인 시뮬레이션을 하기 위하여 서로 다른 두 모델을 구현하고 두 모델간의 동기화를 위한 기술로써 적응성 질량-스프링 모델 기법을 제안한다. 또한, 유연체 변형에 대하여 표면의 세부 형태를 보여주는 시각모델과 사용자의 상호작용에 따른 햅틱 피드백을 전달하는 햅틱 모델, 그리고 이 두개의 모델을 연동시키는 동기화 모델을 통하여 유연체의 거동을 실시간, 사실적으로 제공할 수 있는 가변형 모델 시뮬레이션 프레임워크를 설계한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권8호
• /
• pp.4120-4132
• /
• 2017

In this research, we implement a deformable object simulation system using OpenGL's shader language, GLSL4.3. Deformable object simulation is implemented by using volumetric mass-spring system suitable for real-time simulation among the methods of deformable object simulation. The compute shader in GLSL 4.3 which helps to access the GPU resources, is used to parallelize the operations of existing deformable object simulation systems. The proposed system is implemented using a compute shader for parallel processing and it includes a bounding box-based collision detection solution. In general, the collision detection is one of severe computing bottlenecks in simulation of multiple deformable objects. In order to validate an efficiency of the system, we performed the experiments using the 3D volumetric objects. We compared the performance of multiple deformable object simulations between CPU and GPU to analyze the effectiveness of parallel processing using GLSL. Moreover, we measured the computation time of bounding box-based collision detection to show that collision detection can be processed in real-time. The experiments using 3D volumetric models with 10K faces showed the GPU-based parallel simulation improves performance by 98% over the CPU-based simulation, and the overall steps including collision detection and rendering could be processed in real-time frame rate of 218.11 FPS.

• International Journal of Control, Automation, and Systems
• /
• 제4권3호
• /
• pp.382-393
• /
• 2006

Mechanical system dynamics plays an important role in the area of computational structural biology. Elastic network models (ENMs) for macromolecules (e.g., polymers, proteins, and nucleic acids such as DNA and RNA) have been developed to understand the relationship between their structure and biological function. For example. a protein, which is basically a folded polypeptide chain, can be simply modeled as a mass-spring system from the mechanical viewpoint. Since the conformational flexibility of a protein is dominantly subject to its chemical bond interactions (e.g., covalent bonds, salt bridges, and hydrogen bonds), these constraints can be modeled as linear spring connections between spatially proximal representatives in a variety of coarse-grained ENMs. Coarse-graining approaches enable one to simulate harmonic and anharmonic motions of large macromolecules in a PC, while all-atom based molecular dynamics (MD) simulation has been conventionally performed with an aid of supercomputer. A harmonic analysis of a macroscopic mechanical system, called normal mode analysis, has been adopted to analyze thermal fluctuations of a microscopic biological system around its equilibrium state. Furthermore, a structure-based system optimization, called elastic network interpolation, has been developed to predict nonlinear transition (or folding) pathways between two different functional states of a same macromolecule. The good agreement of simulation and experiment allows the employment of coarse-grained ENMs as a versatile tool for the study of macromolecular dynamics.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.110-116
• /
• 2005

Linear dynamic simulations with one and two degrees of freedom were built from SIMULINK in MATLAB commercial program. Before starting the simulations, initial conditions and system parameters which are mass, spring constant and coefficient of damping are easily inputted by user through each pop-up window, and the conditions for the simulation including time step, analysis methodology and so on can be modified with ease. Also, as soon as the simulations are started, the windows for animations which shows deformed motions dynamically with real time are popped-up and the graphical results are shown in time and frequency domains, simultaneously, The results of the simulations were verified through some examples of textbooks of mechanical vibrations. It was found that the programs would help us to solve any kind of linear dynamic simulation for one and two degrees of freedom.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1874-1880
• /
• 2011

In this paper, sensitivity analysis of the pantograph for the high-speed Train was conducted using finite element analysis method. Dynamic interaction of catenary-pantograph model was simulated by using a commercial finite element analysis software, SAMCEF. Pantograph was assumed to be three degree of freedom mass-spring-damper model and the pre-sag of the contact and messenger wire was implemented due to gravity. The span data of the actual high-speed line and specification of pantograph for high-speed train was applied in the analysis model, respectively. The reliability of the simulation model is verified by comparing the contact force results of simulation and test. Through the simulation, mean contact force and its deviation was evaluated and then sensitivity of the pantograph was analyzed.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.472-477
• /
• 2003

A piezo-actuator is an important component for an E-beam lithography system. But it is very difficult to model its characteristics due to nonlinearities such as hysteresis and creep, to the input voltage. In this paper, one-axis micro stage with a piezo-actuator is modeled including the nonlinear properties. Hysteresis and creep are modeled as the first order differential equation and a time-dependent logarithmic function, respectively. The dynamic motion of the stage is also modeled as a mass-spring-damper system and the parameters are determined by utilizing the system identification technique. The simulation tool for a micro stage is constructed using the commercial software and its simulation results are compared with the experimental data.

• 한국시뮬레이션학회논문지
• /
• 제2권1호
• /
• pp.78-90
• /
• 1993

기존의 모의 실험언어를 이용해서 연속 체계를 모의 실험하는 것을 사용자가 언어에서 요구하는 형태로 모델을 형성해야 하는 어려움이 따른다. 따라서 본 연구에서는 사용자에게 최대한 편의성을 제공하는 연속체계 모의 실험언어인 PCSL (Postech Continuous -system Simulation Language)를 개발하였다. PCSL은 주어진 대상을 모델링한 미분방정식과 그것을 푸는데 필요한 여러 가지 제약 사항으로 이루어진 간단한 프로그램을 입력으로 받아 자동으로 모의 실험을 수행함으로서 사용자의 노력이 최소화하게 된다. PCSL 처리 시스템의 구성은 주어진 모델을 C 프로그램으로 변형하는 변환기, 모의 실험 알고리즘을 구현한 C 프로그램을 생성하는 생성기, 모의 실험을 수행하는 실행기, 사용자 인터페이스 등으로 되어있다. 구현 예로는 먼저 선형 상미분방정식의 예로 mass-damper-spring system, 비선형 상미분방정식의 예로 van der Pol 방정식, 연립 상미분방정식의 예로는 mixing tank problem 등을 보였다.

• 비파괴검사학회지
• /
• 제21권3호
• /
• pp.269-276
• /
• 2001

복합재료의 초음파검사는 매직의 탄성이방성으로 인해 빔스큐(beam skew)현상 등이 발생하기 때문에 등방성 재료의 검사에 비해 훨씬 어렵다. 그 동안의 많은 연구의 결과로서 이방성 재료 네 탄성파의 전파 현상에 대한 해석해법이 정립되어 있으나, 그 해석해가 매우 복잡하여 실제 문제의 해를 구하기 위해서는 수치적인 방법에 의존하여야 하는 경우가 많다. 본 연구에서는 횡등방 이방성(transversely isotropic)으로 가정할 수 있는 단일방향 섬유 복합재료 내 점원에 의한 초음파 전파의 해석해를 먼저 구하고, 이러한 복합재료를 질량-스프링 모델로 모델링하여 해석해에 상응하는 수치해를 구하였다. 그 결과, 초음파의 전파에 대한 수치해와 해석해가 매우 잘 일치하는 것을 확인하였다. 동일한 수치해석법을 사용하여 초음파가 복합재료의 자유표면에서 반사되는 현상과 균일에 의해 산란되는 현상에 대한 수치해도 구하였으며 그 결과를 파동역학의 관점에서 고찰하였다. 본 연구에서 그 유효성이 확인된 수치 모델은 복합재료의 초음파검사를 시뮬레이션 함에 있어 매우 유용하게 사용될 수 있을 것이다.