• 한국정보통신학회논문지
• /
• 제16권4호
• /
• pp.669-676
• /
• 2012

본 논문에서는 써미스터를 이용한 온도보상회로를 이용하여 레이더 센서의 양산성을 향상시킬 수 있는 방안을 제시하였다. 레이더 센서에 사용되는 DRO(Dielectric Resonator Oscillator)의 유전체공진기를 제거한 후, FET의 게이트에 적절한 바이어스전압을 인가할 수 있는 온도보상회로를 이용하여 정확한 발진주파수를 조정하는데 필요한 시간을 절약함으로써 양산이 용이하도록 하였는데, 본 논문에서 제안한 방법으로 제작한 레이더 센서의 출력주파수는 $-20^{\circ}C-+55^{\circ}C$의 온도범위에서 15.67MHz의 변화량을 보였으며, 출력크기의 변화는 0.65dB, 위상잡음 특성은 1MHz에서 -105.47dBc로 같은 온도범위에서 25MHz의 출력주파수 변화, 0.42dB의 출력크기 변화, -107.40 dBc의 위상잡음 특성을 보이는 유전체공진기를 이용한 발진기보다 우수하거나 비슷한 특성을 나타내었다.

• 한국패류학회지
• /
• 제25권2호
• /
• pp.93-96
• /
• 2009

Unexpected mass mortality has been one of the drawbacks in front of the stable production of Japanese scallop (Patinopecten yessoensis) on the Gangwon coasts of the East Sea. The preliminary data from our routine observation revealed that the mortality appeared to be related to variation of water temperature in the farming site and the degree of the mortality was dependent on scallop strain. The present study performed to verify the preliminary findings exhibited that the mortality was closely related to daily temperature variation rather than monthly variation. Daily temperature variation was particularly damageable to the scallop during the temperature elevation period. Scallops from hatchery seeds (Chinese strain) were more tolerant against the temperature variation over those from wild seeds. The hatchery scallop gain of the temperature tolerance was probably due to their larval experience to higher temperature in the hatchery as well as their maternal genetic acclimation to upper temperature extreme of the Chinese environment which was recently found.

• Mass Spectrometry Letters
• /
• 제14권4호
• /
• pp.173-177
• /
• 2023

Kendrick plots offer an alternative visualization of mass spectral data which reveals ion series and patterning by turning a mass spectrum into a map, plotting the fractional mass (wrongly called mass defect) as a function of mass-to-charge ratios and ion abundances. Although routinely used for polymer mass spectrometry, two unreported applications of these Kendrick plots are proposed using the program "kendo2": the graphical recalibration of a mass spectrum via the simulation of a theoretical fractional mass and a multi-segment fit; and the rapid evaluation of scan-to-scan variation of accurate mass measurements used as tolerances for the blank subtraction of UPLC-MS data files. Both applications are compatible with any type of high-resolution MS data including LC/GC-MS(/MS).

• 천문학회지
• /
• 제48권1호
• /
• pp.1-7
• /
• 2015

The orbital period changes of the W UMa eclipsing binary AU Ser are studied using the (O-C) method. We conclude that the period variation is due to mass transfer from the primary star to the secondary one at a very low and decreasing rate $dP/dt=-8.872{\times}10^{-8}$, superimposed on the sinusoidal variation due to a third body orbiting the binary with period $42.87{\pm}3.16$ years, orbital eccentricity $e=0.52{\pm}0.12$ and a longitude of periastron passage ${\omega}=133^{\circ}.7{\pm}15$. On studying the magnetic activity, we have concluded that the Applegate mechanism failed to describe the cycling variation of the (O-C) diagram of AU Ser.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.92-101
• /
• 1996

In a gasoline engine, the characteristics of air flow is very important not only for the design of the intake system geometry bout also for the accurate measurement of the induction air mass. In this study, an air flow rate measurement of the induction air mass. In this study, an air flow rate measurement was conducted by using the hot wire flow meter at the upstream of the intake port and the throttle. At the upstream of the throttle, the overshoot phenomena of the air flow rate by fast throttle opening were analyzed with choked flow. At the upstream of the intake port, the cylinder variation of the air flow rate and the difference between fast throttle opening and closing were showed during the unsteady state by the throttle step change. The results of this study can be used for the design of the throttle valve geometry and cylinder by cylinder control.

• 천문학논총
• /
• 제30권2호
• /
• pp.211-214
• /
• 2015

We investigated the period variation for 79 eclipsing binary systems using 20 years (1990-2009) of EROS, Macho, and OGLE survey observations. We discovered 9 apsidal motions, 8 mass transfers, 5 period increasing and decreasing systems, 12 light-travel-time effects, 5 eccentric systems and 40 other systems showing no period variations. We select 3 representative eclipsing binary systems; EROS 1052 for apsidal motion, EROS 1056 for mass transfer, and EROS 1037 for the light-travel-time effect. We determine the period variation rate (dP/dt), orbital parameters of the 3rd body (e3, ${\omega}_3$, $f(m_3)$, $P_3$, $T_3$), apsidal motion parameters ($d{\omega}/dt$, U, Ps, Pa, e) and apsidal motion period by analyzing the light curves and O-C diagrams.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2725-2730
• /
• 2003

In this study we present a vibration controller for articulated robots that has flexible joints modeled as a 2-mass system. Most of articulated robots have time varying load inertias for each axis according to its motion. Moreover, the inertias vary drastically; for the base axis of articulated robots it may vary about 10 times of its minimum value. But, for industrial robots and many mechatronic devices, it is desirable to maintain control performance in spite of load inertia variation. So we propose a control gain adjustment rule considering the time-varying nature of load inertia. In this gain-adjusting algorithm, the pole locations are in proportion to the anti-resonance frequency of the 2-mass system. The simulation and experimental results show uniform properties in overshoot in spite of the variation of load.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.199-204
• /
• 2006

In this paper, we propose an adaptive control algorithm to improve the position accuracy and reduce the nonlinear friction effects for linear motion servo system. Especially, the considered system includes not only the variation of the mass of the mover but also the friction change by the normal force. To adapt to these problems, we designed the controller with the mass estimator and the compensator by observing the variation of normal force. Finally, the numerical simulation results are presented in order to show the effectiveness of the proposed method to improve the position accuracy compared to other control methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1303-1305
• /
• 2005

This paper deals with the impedance modeling and frequency response of moving-magnet linear actuator considering mass/spring system. By expressing mechanical components as electrical components such as impedance from the motion equation, this paper investigates not only the variation of system impedance according to system parameters such as moving mass, thrust constant, the coefficient of elasticity for spring and damping coefficient but also the variation of power vs. frequency for moving-magnet linear actuator with spring.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.155-159
• /
• 2004

In this paper, it was analyzed the characteristics of electrical and acoustical variations for loudspeaker due to fabrication processes. First, mass of each components of loudspeaker was measured by electric precision scale and performed statistical analysis. Second. Thiele-Small parameters of sample loudspeakers produced by unskilled students were identified by known mass parameter identification method using electrical impedance method and investigated on the variations of each parameter. Electrical impedance tests and acoustic frequency responses were measured on sample loudspeakers and variations were examined to grasp relationship between components variation and fabrication processes. Main factors to effect the changes of electrical impedance were concluded by fabrication processes errors not by components of loudspeaker.