• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.797-807
• /
• 2008

For this study, the semi-adiabatic temperature rising test is accomplished by using ternary system cement (OPC, BFS, FA) reducing temperature crack. Two tests are conducted; one is for the paste test, and the other is for the concrete test. As the results of paste tests, using fly ash is better to reduce hydration temperature than doing blast furnace slag. In the case of the paste mixed ternary system cement, the more fly ash is mixed and the less blast furnace slag is used, the lower the temperature is. The less the mixture ratio of blast furnace slag is and the more the mixture ratio of fly ash is, the later the temperature rising velocity and descending velocity are. Besides, the temperature is lower if water/binder ratio is high. The use of ternary system cement has the retardation effect of temperature rising because the time to reach the maximum temperature is in the order of OPC100, binary system cement, and ternary system cement. From the test, the maximum temperature of concrete used ternary system cement is $8{\sim}11^{\circ}C$ lower than that of concrete used OPC100. Moreover, temperatures rising velocity and descending velocity of ternary system cement range $47{\sim}51%$ and $37{\sim}42%$ compared with OPC100. The specimen of concrete shows remarkable low internal temperature and slow temperature rising velocity and descending velocity compared with the specimen of paste because it is that temperature loss of concrete is much more than paste specimen according to aggregates.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.117-129
• /
• 2002

Concentration of welding fumes and their components is known to be hazardous to welder and adjacent worker. To determine the generation rates of metals in fumes, $CO_2$ flux cored arc welding on stainless steel was performed in well designed fume collection chamber. Variables were different products of flux cored wire(2 domestic products and 4 foreign products) and input energy(low-, optimal- , high input energy). Mass of welding fumes was determined by gravimetric method(NIOSH 0500 method), and 17 metals were analysed by inductively coupled plasm-atomic emission spectroscopy(NIOSH 7300 method). Flux cored wire tube and flux were analysed by scanning electron microscopy to determine their metal composition. 17 metals were classified by their generation rates. Generation rates of iron, manganese, potassium and sodium were all above 50mg/min at optimal input energy level. Generation rates of chromium and amorphous silica were 25~50mg/min. At 1~25mg/min level, nickel, titanium, molybdenum, and aluminum were included. Copper, zinc, calcium, lead, magnesium, lithium, and cobalt were generated below 1 mg/min. Generation rates of metal components in fumes were influenced by input energy, types of flux cored wire. Flux cored wire was consisted of outer shell tube and inner flux. Iron, chromium, and nickel were the major components of outer tube. Flux contained iron, chromium, nickel, potassium, sodium, silica, and manganese. The use of flux cored wire can increase the hazards by increasing the amounts of fumes formed relative to that of solid wire. The reason might be the direct transfer of elements from the flux, since the flux is fine power. Ratio of metals to the fume of flux cored wire was lower than that of solid wire because non-metal components of flux were transferred. Total metal content of fumes in flux cored arc welding was 47.4(24.3~57.2) percent that is much lower than that of solid wire, 75.9 percent. We found that generation rates of iron, manganese, chromium and nickel, all well known to cause work related disease to welder, increased more rapidly with increasing input energy than those of fumes. To reduce worker exposure to fumes and hazardous component at source, further research is needed to develop new welding filler materials that decrease both the amount of fumes and hazardous components.

• Journal of Environmental Health Sciences
• /
• v.42 no.1
• /
• pp.10-18
• /
• 2016

Objectives: Microcystin (MC) produced during cyanobacterial blooms is a worldwide problem presenting a serious health threats to humans and ecosystems. During July through October of 2013, the Ilwol Reservoir experienced a high biomass of phytoplankton (maximum $211.7mg/m^3$ of Chlorophyll-a) containing the toxigenic cyanobacterium Oscillatoria sp. The aim of this study is to analyze MC concentration in the reservoir water, as well as in representative fish species (Carassius cuvieri, Carassius auratus, Channa argus). We also evaluated the human health risk of exposure to MCs accumulated in the fish. Methods: Concentrations of MCs in the water and fish samples were analyzed by liquid chromatography with a triple quadrupole tandem mass spectrometer (LC/MS/MS) and enzyme-linked immunosorbent assay (ELISA). Results: The total levels of four MC variants, including MC-LR, MC-RR, MC-YR and MC-LA were below the WHO drinking water guideline limit (1 ug MC-LR per liter) both for the dissolved and particulate fraction present in the water samples. The mean MC concentrations in the livers of all species were significantly higher than in the gills (p < 0.01) and muscles (p < 0.05). The values of estimated daily intake of MCs in muscles, the edible part of the fish, would be only $0.005-0.015{\mu}g/kg{\cdot}day$, much lower than WHO's provisional tolerable daily intake of $0.04{\mu}g/kg{\cdot}day$. Conclusion: This study suggests that, owing to the spatial distribution or temporal variation of MC, there is a need for careful monitoring of cyanotoxin in reservoir water and aquatic animals to protect public health.

• Journal of Korean Society of Forest Science
• /
• v.98 no.2
• /
• pp.183-188
• /
• 2009

It is necessary to determine the amount of carbon dioxide ($CO_2$) absorbed by plants and released from forest floor into atmosphere, to gain a better understanding how forests participate in the global carbon cycle. Soil $CO_2$ efflux, litter production, and decomposition were investigated in Q. variabilis and P. densiflora stands in the vicinity of Gwangju, Chonnam province. Soil $CO_2$ efflux was measured using Infrared Gas Analyzer (IRGA) at midday of the 10th day at every month over 12-month period, to quantify seasonal and annual budgets of soil $CO_2$ efflux. Soil temperature and soil moisture were measured at the same time. Seasonal soil $CO_2$ efflux in Q. variabilis and P. densiflora were the highest in summer season. In August, maximum soil $CO_2$ efflux in Q. variabilis and P. densiflora was 7.49, $4.61CO_2{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. Annual $CO_2$ efflux in each stand was 1.77, $1.67CO_2kg{\cdot}m^{-2}$ respectively. Soil $CO_2$ efflux increased exponentially with soil temperature and related strongly in Q. variabilis ($r^2$=0.96), and in P. densiflora ($r^2$=0.91). Litter production continued throughout the year, but showed a peak on November and December. Annual litter production in the Q. variabilis and P. densiflora stands were $613.7gdw{\cdot}m^{-2}{\cdot}yr^{-1}$ and $550.5gdw{\cdot}m^{-2}{\cdot}yr^{-1}$.$yr^{-1}$, respectively. After 1 year, % remaining mass of Q. variabilis and P. densiflora litter was 48.2, 57.1%, respectively. The soil $CO_2$ efflux rates in this study showed clear seasonal variations. In addition, the temporal variation in the $CO_2$ efflux rates was closely related to the soil temperature fluctuation rather than to variations in the soil moisture content. The range of fluctuation of soil $CO_2$ efflux and litter decomposition rate showed similar seasonal changes. The range of fluctuation of soil $CO_2$ efflux and litter decomposition rate was higher during summer and autumn than spring and winter.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.1
• /
• pp.67-81
• /
• 2016

In order to examine the variation characteristics of chemical compositions in accordance with the different meteorological conditions, $PM_{10}$ and $PM_{2.5}$ were collected at Gosan site of Jeju Island in 2014, and then their ionic and elemental species were analyzed. The concentrations of nss-$SO{_4}^{2-}$ and $NH_4{^+}$ were respectively 4.3 and 3.3 times higher in fine particle mode ($PM_{2.5}$) compared to coarse particle mode ($PM_{10-2.5}$), however $NO_3{^-}$ concentration was 1.6 times higher in coarse mode compared to fine particle mode. During Asian dust days, the concentrations of nss-$Ca^{2+}$ and $NO_3{^-}$ increased highly as 7.7 and 4.5 times in coarse particle mode, and 3.0 and 4.9 times higher in fine particles, respectively. Especially, the concentrations of the crustal species (Al, Fe, Ca, K, Mn, Ba, Sr, etc.) indicated a noticeable increase during the Asian dust days. For the haze days, the concentrations of secondary pollutants increased 2.2~2.7 and 2.9~6.0 times in coarse and fine particles, respectively, and they were 0.8~1.1 and 1.8~2.4 times, respectively, during the mist days. The aerosols were acidified largely by sulfuric and nitric acids, and neutralized mainly by ammonia in fine particle mode during the haze days, but neutralized by calcium carbonate in coarse particle mode during the Asian dust days. The clustered back trajectory analysis showed that the concentrations of nss-$SO{_4}^{2-}$, $NO_3{^-}$, and $NH_4{^+}$ were relatively high when the inflow pathway of air mass was from the southern part of China.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.761-772
• /
• 2008

The object of this study is to develop the model that solves the numerically difficult problems in hydraulic engineering and to demonstrate the applicability of this model by means of various test examples, such as, verification in the gradually varied unsteady condition, three steady flow problems with the change of bottom slope with exact solution, and frictional bed with analytical solution. The governing equation of this model is the integral form of the Saint-Venant equation satisfying the conservation laws, and finite volume method with the Riemann solver is used. The evaluation of the mass and momentum flux with the HLL Riemann approximate solver is executed. MUSCL-Hancock scheme is used to achieve the second order accuracy in space and time. This study introduce the new and simple technique to discretize the source terms of gravity and hydrostatic pressure force due to longitudinal width variation for the balance of quantity between nonlinear flux and source terms. The results show that the developed model's implementation is accurate, robust and highly stable in various flow conditions with source terms, and this model is reliable for one-dimensional applications in hydraulic engineering.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.205-210
• /
• 1994

This study was conducted to develop a method of mass production by cutting of superior genotypes of Larix leptolepis and to examine the effects of ortet age, clone, crown position, and an applied plant growth substance upon the rooting of cuttings. Four different ortet ages, 2, 8, 16 and 30 years and three levels of root-promoting substances, indole butyric acid(IBA), at 1000, 2000, and 5000ppm were employed. Greenwood cuttings were taken from mother trees in late July and rooted for three months in rooting medium containing peatmoss : vermiculite : perlite(1 : 1 : 1 by volume). with temperature controlled at $20-25^{\circ}C$, humidity by intermittent misting and light by partial shading in the greenhouse. Cuttings treated with 1000ppm IBA showed highest rooting, with 80%, 71%, 52%, 25% for 2-, 8-, 16-. 30-year-old ortet, respectively. Untreated cuttings showed rooting of 52%, 48%, 36%, 20% for the ortet age of 2, 8, 16, 30 years, respectively. The average number of adventitious roots decreased with increasing ortet age from 2 to 30 years, whereas IBA treatment increased the number of roots in all ages. A variation in rooting among 20 clones tested was observed. The 4 clones, Chungnam 6, and 7 and Chonbuk 1, and 9 showed good rooting of about 67%, while Kangwon 49 showed boor rooting of 40% at 1000ppm IBA treatment. When crown position was compared, cuttings taken from middle crown showed highest rooting of 60%, while cuttings from upper crown showed lowest rooting of 53%.

• Journal of Korean Society of Forest Science
• /
• v.69 no.1
• /
• pp.19-27
• /
• 1985

Introgressive hybridization of Pinus densiflora in Korea was investigated by examining the position of resin ducts in 4,992 trees from 67 populations. Judging that P. densiflora has only external resin ducts, P. thunbergii only medial resin ducts, and any tree which has even one needle with external and medial resin ducts is hybrid, hybrids are found at all populations investigated. As variation in position of resin ducts was found among needles on a tree, the number of needles investigated from a tree affects judgment of the tree's hybridity. Therefore, hybridity seems to be judged by many traits rather than by the single trait, position of resin ducts. Seed production by artificial pollination between P. densiflora and P. thunbergii was very poor, i.e. one full seed from five female flowers or from two mature cones. This poor seed production, in addition to the low hybrid vigor, if any, seems to make the artificial pollination between the two species for mass-production of seeds for planting impractical.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.209-214
• /
• 2012

Indigo crop, Persicaria tinctoria H. Gross is an annual plant containing natural colorant, the blue dye indigo, and local cultivars had been cultivated to produce natural indigo for textile dyeing in Korea since ancient times. Naju No. 2 is a new mass-selected line from the mother population, Naju Local cultivar. In this study, two breeding lines of Naju Local and Naju No. 2, have been cultivated in four different locations, the South regions of Korea, to compare plant growth and yield characteristics between two lines. Naju No. 2 was higher in plant height, and Naju Local has more 1st branches. Naju No. 2 has larger leaf area and higher width/length ratio of leaf, showing the round leaf type as morphological stable character without regional differences. Though there was considerable regional variation in fresh and dry top weight of harvested plant, the significant difference of plant weight between two lines were not shown. The ratio of leaf to total shoot of dry weight of Naju No. 2 was higher than one of Naju Local, indicating that Naju No. 2 has better yielding of colorant which is synthesized mostly in leaf. Naju No. 2 contained more Niram (crude indigo extract) and indigo, and showed much blueness at dyeing of silk using fresh leaves than Naju Local. We concluded that a new line, Naju No. 2 could be a superior cultivar due to having higher leaf yield and better quality of natural colorant than Naju local cultivar.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.282-288
• /
• 1996

Because of the high water content of the household garbage, it is difficult to compost it. Therefore, this study was conducted to investigate the possibility of using coal fly ash as humidity conditioner for the household garbage composting. The summarized results are as follows : 1. The maximum temperatures were $35^{\circ}C$ in spring, $47^{\circ}C$ in summer, and $43^{\circ}C$ in winter during the composting periods. 2. The mass was reduced to 70.5% after 60 days. The average volume reduced down to 74.7% after 60 days. 3. The seasonal variation of pH values showed a similar tendency and reached 8.5 after 60 days. 4. The water content was reduced at an early stage of composting and not much changed thereafter. It had 49.7% in spring, 33.9% in summer, and 56.5% in winter after 60 days. Ash contents were not much changed during the composting periods. 5. The contents of inorganic compounds were in the range of $0.06{\sim}4.03%$ $P_2O_5$, $0.01{\sim}2.87%$ CaO, $0.18{\sim}1.43%$ MgO, and $0.39{\sim}2.03%$ $K_2O$. Heavy metal contents were in the range of $ND{\sim}14.08$ Hg ${\mu}g/kg$, $ND{\sim}0.80$ Cd mg/kg, $4.99{\sim}28.95$ Cu mg/kg, $ND{\sim}242.62$ Cr mg/kg, $ND{\sim}20.24$ Pb mg/kg, and $ND{\sim}59.87$ Zn mg/kg.