• Journal of Powder Materials
• /
• v.27 no.5
• /
• pp.420-428
• /
• 2020

Additive manufacturing technology is recognized as an optimal technology for mass-customized distributed production because it can yield products with high design freedom by applying an automated production system. However, the introduction of novel technologies to the additive manufacturing industry is generally delayed, and technology uncertainty has been pointed out as one of the main causes. This paper presents the results of the research and analysis of current standardization trends that are related to additive manufacturing by examining the hierarchical structure of the quality system along with the various industry and evaluation standards. Consequently, it was confirmed that the currently unfolding standardization does not sufficiently reflect the characteristics of additive manufacturing technology, and rather can become a barrier to entry for market participants or an element that suppresses the lateral shearing ability of additive manufacturing technology.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.408-413
• /
• 2008

This study presents comparison of the air side heat transfer and friction characteristics in a heating condition between Louver fin-tube heat exchangers and aluminum heat exchangers. Experiments are performed for the Louver fin-tube heat exchangers and aluminum heat exchangers using a calorimeter, which is designed based on air-enthalpy method described in ASHRAE standards. The air velocities its are varied from 0.7 to 1.6 m/s with 0.3 m/s interval. A study result shows that the heat transfer performances of aluminum heat exchangers are $40{\sim}80%$ higher than those of Louver fin-tube heat exchangers per unit volume, mass and heat transfer area.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.29-33
• /
• 2017

This paper presents a development of vision aligner with three channels for the wafer and plate bonding machine in manufacturing of LED. The developed vision aligner consists of three cameras and performs wafer alignment of rotation and translation, flipped wafer detection, and UV Tape detection on the target wafer and plate. Normally the process step of wafer bonding is not defined by standards in semiconductor's manufacturing which steps are used depends on the wafer types so, a lot of processing steps has many unexpected problems by the workers and environment of manufacturing such as the above mentioned. For the mass production, the machine operation related to production time and worker's safety so the operation process should be operated at one time with considering of unexpected problem. The developed system solved the 4 kinds of unexpected problems and it will apply on the massproduction environment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.525-528
• /
• 2005

This study determines the best composite grade to minimize the void of aggregate mixture based on the maximum density theory in an attempt to suggest a mix proportion method design for asphalt mixtures. Study results show that the grading curve with the maximum mass per unit capacity of each aggregate mixture satisfied the KS standards and the optimum AP content to meet the optimal asphalt mixture void rate of 4$\%$ was 5.7$\%$, less than the optimum AP content of 6.5$\%$ suggested in the Marshal mix proportion method design. At the same time, the asphalt mixture produced based upon the suggested mix proportion method had a flow value 17$\%$ lower than that of asphalt mixture produced according to the Marshal method, while its density was greater by 0.06$\～$0.09. This suggests that the introduced mix proportion method design helps to improve the shape flexibility and crack-resistance of asphalt concrete.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.47-54
• /
• 2017

This study analyzed air suspension seat frame structure and vibration for 50 - 180 kg mass driver to obtain optimum seat design parameter values for the equivalent spring constant and damping coefficient. Various air suspension seat frames were designed following WTS-003 and KS B 6839 standards, and then evaluated using finite elements analysis. Resonance and vibration tests were performed according to the 78/764/EEC standard.

• Journal of Ginseng Research
• /
• v.20 no.3
• /
• pp.284-290
• /
• 1996

To Identify phenolic components known to exist in Korean ginseng (Panax ginseng C.A. Meyer) by GC/MS, three derivatization methods were employed for their analyses. First, phenolic components in ether soluble acidic fraction prepared from Korean red ginseng powder were taimethylsilylated. Secondly, phenolic acids in the same fraction were esterified with diazomethane followed by trlmethylsilylation. Thirdly, acidic components in ginseng powder were extracted and esterified concurrently by methanolic sulfuric acid, followed by fractionation of phenolic components with Silica Sep-Paka and trimethylsilylatlon. All phenolic components found in ginseng except gen tisic acid were identified by retention times and mass spectrums of standards. Besides, 5 phenolic components including salicyl alcohol and 1-H-indole-2-carboxylic acid were first identified from Korea an red ginseng by GC/MS.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.139-142
• /
• 2013

A study was carried out to evaluate the solid phase micro-extraction (SPME) for formaldehyde emission analysis of uncoated plywood. In SPME, formaldehyde was on-fiber derivatized through headspace extraction and analyzed by gas chromatography coupled with mass spectrometry (GC/MS). The SPME was compared with desiccators (DC-JAS 233), small-scale chamber (SSC-ASTM D6007) and liquid-liquid extraction (LLE-EPA 556) methods which were performed in accordance with their respective standards. Compared to SSC (RSD 4.3%) and LLE (RSD 5.0%), the SPME method showed better repeatability (RSD 1.8%) and not much difference from DC (RSD 1.4%). The SPME has proven to be highly precise (at 95% confidence level) with better recovery (REC 102%). Validation of the SPME method for formaldehyde quantitative analysis was evidenced. In addition, the SPME by air sampling directly from plywood specimens (SPME-W) correlated best with DC ($r^2$ = 0.983), followed by LLE ($r^2$ = 0.950) and SSC ($r^2$ = 0.935).

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.262-269
• /
• 2008

The residual gas analyzer (RGA) is employed for the process control of a vacuum system by measuring residual gases in it. This review paper introduces operating principles of the RGA and problems that can be encountered during use, together with their possible solutions.

• Journal of the Optical Society of Korea
• /
• v.8 no.4
• /
• pp.188-191
• /
• 2004

A new laser Doppler velocimeter employing a $CO_2$ laser has been developed by using its photoacoustic effect. A change in the pressure of a discharge, induced by mixing of a returned wave with an originally existing wave inside the cavity, is employed to detect the Doppler frequency shift. We found that a Doppler frequency shift as small as 50 kHz was detected, and also a good linear relationship between the velocity and the Doppler frequency shift was obtained.

• Culinary science and hospitality research
• /
• v.18 no.5
• /
• pp.176-189
• /
• 2012

This study was conducted to investigate the effective educational and promotional strategies for the Special Act on the Safety Management of Children's Dietary Life on the basis of the survey conducted on parents. First of all, its result showed that most parents are well aware of the main contents of the law. They answered that, when choosing safe favorite food for children, the most important part is the article "Regulations on the standards for children's favorite food should be reinforced." As for the index of safety management for children's dietary life, most respondents think safety the most important; housewives and nuclear family members choose safety (p<.01), while large family members do nutrition. For the question asking how they get the information on safety management for children's dietary life, most of them answered that they generally use mass media, family and friends as a reference. Those with high income usually get the information from special books, those between 30s and 50 from mass media, and those with college graduates from civil social groups (p<.05). In case of taking the safety education programs for children's dietary life, they told that the most necessary information is concerned with hygienic dietary life and nutrition labeling on processed food; housewives are interested in the latter, while working people in the former (p<.05). As a method of informing parents of the Special Act on the Safety Management of Children's Dietary Life, mass media such as TV and radio, and school education are suggested in this survey. Therefore, this study proposes that mass media be considered as the most effective way of promoting the Special Act on the Safety Management of Children's Dietary Life and getting information concerning the law.