DOI QR코드

DOI QR Code

Integration of Headspace Solid Phase Micro-Extraction with Gas Chromatography for Quantitative Analysis of Formaldehyde

  • Lo, Kong Mun (Chemistry Department, Faculty of Science, University of Malaya) ;
  • Yung, Yen Li (Chemistry Department, Faculty of Science, University of Malaya)
  • Received : 2012.09.04
  • Accepted : 2012.10.22
  • Published : 2013.01.20

Abstract

A study was carried out to evaluate the solid phase micro-extraction (SPME) for formaldehyde emission analysis of uncoated plywood. In SPME, formaldehyde was on-fiber derivatized through headspace extraction and analyzed by gas chromatography coupled with mass spectrometry (GC/MS). The SPME was compared with desiccators (DC-JAS 233), small-scale chamber (SSC-ASTM D6007) and liquid-liquid extraction (LLE-EPA 556) methods which were performed in accordance with their respective standards. Compared to SSC (RSD 4.3%) and LLE (RSD 5.0%), the SPME method showed better repeatability (RSD 1.8%) and not much difference from DC (RSD 1.4%). The SPME has proven to be highly precise (at 95% confidence level) with better recovery (REC 102%). Validation of the SPME method for formaldehyde quantitative analysis was evidenced. In addition, the SPME by air sampling directly from plywood specimens (SPME-W) correlated best with DC ($r^2$ = 0.983), followed by LLE ($r^2$ = 0.950) and SSC ($r^2$ = 0.935).

Keywords

References

  1. Bizarri, S. Chemical Economics Handbook Report; SRI Consulting: 2010. http://www.sriconsulting.com/CEH/Public/Reports/658.5000/
  2. JAS 233, Japanese Agricultural Standard for Plywood; Japanese Ministry of Agriculture, Fisheries & Forestry: Japan, 2003.
  3. ASTM D6007-02, Standard test method for determining formaldehyde concentration in air from wood products using smallscale chamber; ASTM Committee D07: Washington, 2002.
  4. EPA Method 556, Determination of carbonyl compounds in drinking water by fast gas chromatography Rev.1.0; US Environmental Protection Agency: Cincinnati, OH, 1998.
  5. Risholm-Sundman, M.; Larsenb, A.; Vestina, E.; Weibulla, A. Am. Environ. 2007, 41, 3193.
  6. Park, B.-D.; Kang, E.-C.; Park, S.-B.; Park, J.-Y. Eur. J. Wood Prod. 2011, 69, 311. https://doi.org/10.1007/s00107-010-0446-6
  7. Myers, G. Forest Prod. J. 1984, 34, 35.
  8. Wiglusz, R.; Jarnuszkiewicz, I.; Sitko, E. C.; Nikel, G. C. Build. Environ. 2000, 35, 53. https://doi.org/10.1016/S0360-1323(99)00003-7
  9. Que, Z.; Furuno, T.; Katoh, S.; Nishino, Y. Build. Environ. 2007, 42, 1242. https://doi.org/10.1016/j.buildenv.2005.11.026
  10. Rivero, R. T.; Topiwala, V. J. Chromatogr. A 2004, 1029, 217. https://doi.org/10.1016/j.chroma.2003.12.054
  11. Iglesias, J.; Lois, S.; Medina, I. J. Chromatogr. A 2007, 1163, 277. https://doi.org/10.1016/j.chroma.2007.06.036
  12. Deng, C.; Li, N.; Zhang, X. J. Chromatogr. B 2004, 813, 47. https://doi.org/10.1016/j.jchromb.2004.09.007
  13. Schumann, A.; Lenth, C.; Hasener, J.; Steckel, V. Int. J. Ion Mobil. Spec. 2012, 15, 157. https://doi.org/10.1007/s12127-012-0103-3
  14. CARB PI & PII Standards, "Title 17, California Code of Regulations, Sec. 93120-Airborne Toxic Control Measure Phase I, II", 2009, California Environmental Resources Agency, Air Resources Board.
  15. EN 717-1, Part 1: "Formaldehyde emission by the chamber method", 2004, European Committee for Standardization, Europe.
  16. Martos, P. A.; Pawliszyn, J. Anal. Chem. 1998, 70, 2311. https://doi.org/10.1021/ac9711394
  17. Saison, D.; De Schutter, D. P.; Delvaux, F.; Delvaux, F. R. J. Chromatogr. A 2009, 1216, 5061. https://doi.org/10.1016/j.chroma.2009.04.077
  18. Lee, I-S.; Tsai, S.-W. Analytica Chimica Acta 2008, 610, 149. https://doi.org/10.1016/j.aca.2008.01.035
  19. Cancho, B.; Ventura, F.; Galceran, M. T. J. Chromatogr. A 2001, 943, 1.
  20. Bao, M.-L.; Pantani, F.; Griffini, O.; Burrini, D.; Santianni, D.; Barbieri, K. J. Chromatogr. A 1998, 809, 75. https://doi.org/10.1016/S0021-9673(98)00188-5
  21. Meyer, B.; Hermanns, K. In ACS Symposium Series 316; American Chem. Soc.: Washington D.C., 1986, 1.
  22. Roffael, E. Holz RohWerkst 2006, 64.
  23. Weigl, M.; Wimmer, R.; Sykacek, E.; Steinwender, M. Forest Prod. J. 2009, 59, 88.
  24. White, M. Acidity: common cause of panel gluing problem; Virginia Tech: Blacksburg, 1998. VA http://www.woodweb.com/knowledge_base/Acidity_Common_Cause.html
  25. Risholm-Sundman, M.; Wallin, N. Holz als Roh- und Werkstoff 1999, 57, 319. https://doi.org/10.1007/s001070050351
  26. Kim, S.; Kim, J.-A.; Kia, H.-J.; Lee, H.-H.; Yoon, D.-W. Pol. Testing 2006, 25, 904. https://doi.org/10.1016/j.polymertesting.2006.05.010
  27. Toxicological profile for formaldehyde; US Department of Health and Human Services, Public Health Service, Agency for toxic substance and disease registry, 1999.

Cited by

  1. A Study on Isothermal Adsorption of VOCs onto Gypsum Mortar Incorporating Oyster Shell vol.19, pp.2, 2013, https://doi.org/10.7464/ksct.2013.19.2.134
  2. Determination of formaldehyde in hair creams by gas chromatography-mass spectrometry vol.7, pp.9, 2015, https://doi.org/10.1002/dta.1808