• 제목/요약/키워드: Mass Balance Model

검색결과 279건 처리시간 0.032초

AMBER를 이용한 방사성폐기물처분장 생태계 평가 템플릿 ACBIO 개발 (Development of ACBIO: A Biosphere Template Using AMBER for a Potential Radioactive Waste Repository)

  • 이연명;황용수;강철형;한필수
    • 방사성폐기물학회지
    • /
    • 제3권3호
    • /
    • pp.213-229
    • /
    • 2005
  • 심부 및 천부 지질 환경을 갖는 지하 모암 내의 방사성 폐기물 처분장으로부터 유출된 핵종은 다양한 인공 및 지하 매질을 거쳐 궁극적으로 인간 생태환경으로 도달하게 된다. 그 결과로 인간에게 주는 피폭선량률을 정량적으로 계산하는 것은 처분안전성 평가의 최종 단계가 된다. 방사성폐기물에 포함된 핵종에 대해 붕괴사슬을 고려하고 방사성폐기물처분 시스템의 주요한 부분을 이루는 생태계를 구획으로 모델링 한 후 이들 구획간의 핵종이동에 대한 전이계수를 적용하여 동적 구획모델을 기반으로 하는 AMBER를 이용한 케이스화일로서 ACBIO템플릿을 개발하고 이를 이용하여 각 핵종별 선량환산인자를 평가해 보았다.

  • PDF

Effect of Ethanol on the Protolytic Properties of the Vitamins B Group

  • Ghasemi, J.;Shiri, F.
    • 대한화학회지
    • /
    • 제51권1호
    • /
    • pp.21-30
    • /
    • 2007
  • 다중파장 분광광도법 적정을 사용하여 25 oC에서 0.1M NaNO3를 함유한 에탄올-물 이성분 혼합 용매 중에서 네 가지 수용성 비타민인 엽산(비타민 B9 또는 B10), 티아민(비타민 B1), 리보플라빈(비타민 B2) 및 피리독살(비타민 B6)의 양성자이전상수를 조사하였다. 인자분석모형으로 pH-흡광도 데이터를 적절한 질량균형방정식에 곡선맞추기 (curve fitting)하여 양성자이전 평형상수, 스펙트럼, 농도 도표와 성분 수를 계산하였다. DATAN 프로그램으로 산도상수를, SPECFIT 프로그램으로 표준편차와 부분상관계수를 계산하였다. Gran 도시에 바탕을 둔 4-파라미터 식, pH = α + SpcH + JH+[H+] + JOH-Kw/[H+]에 의거한 유리전극 보정과정을 사용하여 pH값을 농도 척도(pcH)로 읽었으며, 용매가 양성자이전상수에 미치는 영향을 고찰하였다.

염수 전기분해와 연계한 이산화탄소의 전환 공정 연구 (A Study on a Process for Conversion of Carbon Dioxide through Saline Water Electrolysis)

  • 이동욱;이지현;이정현;곽노상;이수진;심재구
    • Korean Chemical Engineering Research
    • /
    • 제55권1호
    • /
    • pp.86-92
    • /
    • 2017
  • 석탄 화력발전 연소 배가스에 포함된 이산화탄소를 염수의 전기분해를 통해 얻어진 가성소다와 반응시켜 중탄산나트륨, 염소, 수소 등을 생산하는 공정에 대하여 실험과 전산모사를 병행하였다. Bench 규모 공정을 디자인하여 가성소다에 의한 이산화탄소 전환 공정에 대하여 실험하였고 같은 공정을 공정 모델링을 통해 전산모사 하였다. 실험결과와 전산모사 결과의 비교를 통해 모델의 신뢰성을 확인하였고, 상용급 공정에 대한 모델링을 수행하였다. 상용급 공정에 대한 열 및 물질수지를 계산하였고 반응기내 온도분포와 $CO_2$ 흡수율을 도출하였다. 본 연구를 통해 온실가스 저감뿐만 아니라 $CO_2$ 전환을 통한 경제성까지 갖춘 본 공정에 대한 기술 신뢰성을 확보할 수 있을 것이다.

공동주택의 적정 환기량 및 필터의 선정 - 실내입자농도를 중심으로 - (Selection of Ventilation Rate and Filter for a Residential Housing in View of Indoor Particle Concentration)

  • 노광철;정의경;황정호
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.517-522
    • /
    • 2008
  • Ventilation rate and filter were selected to simultaneously satisfy indoor air quality and minimize energy consumption in residential housing. The concentrations of indoor particles were calculated using an adapted mass balance model for various ventilation airflow rates. To satisfy the guidelines for indoor concentrations of particles, the minimum ventilation rates of 1.0/h, 0.6/h and 0.4/h were required for MERV11, MERV13 and MERV14, respectively. And the fan power consumptions induced by ducts, a heat exchanger and a filter were calculated for various ventilation airflow rates. The increase in the ventilation rate caused a dramatic increase in the power consumption, but the filter performance did not have much of an effect on the fan power for ventilation airflow rates lower than 0.4/h. The use of the ventilation filter of MERV 14 was suggested at a ventilation rate of 0.4/h when the fan power consumptions were considered in addition to the indoor concentrations of particles and $CO_2$. The use of the MERV14 filter at a ventilation rate of 0.6/h could be more effective than the additional use of an indoor air cleaner when the residential housing unit was ventilated.

  • PDF

대금음자(對金飮子)가 흰쥐의 만성 알콜성 근위축에 미치는 영향 (The Effects of Daekumeumja on Alcohol-induced Muscle Atrophy in Rats)

  • 김범회
    • 대한한의학방제학회지
    • /
    • 제24권3호
    • /
    • pp.153-161
    • /
    • 2016
  • Chronic alcoholic myopathy is one of the most common skeletal muscle disorders. It is characterized by a reduction in the entire skeletal musculature, skeletal muscle weakness, and difficulties in gait. Patients with alcoholic hepatitis and cirrhosis have severe muscle loss that contributes to worsening outcome. Although the myopathy selectively affects Type II (fast twitch, glycolytic, anaerobic) skeletal muscle fibers, total skeletal musculature is reduced. The severity of the muscle atrophy is proportional to the duration and amount of alcohol consumed and leads to decreased muscle strength. The mechanisms for the myopathy are generally unknown but it is not due to overt nutritional deficiency, nor due to either neuropathy or severe liver disease. Skeletal muscle mass and protein content are maintained by a balance between protein synthesis and breakdown and in vivo animal models studies have shown that ethanol inhibits skeletal muscle protein synthesis. Daekumeumja is a traditional Korean medicine that is widely employed to treat various alcohol-induced diseases. Muscle diseases are often related to liver diseases and conditions. The main objective of this study was to assess that Daekumeumja extract could have protective effect against alcoholic myopathy in a Sprague-Dawley rat model. Rats were orally given 25% ethanol (5ml/kg, body weight) for 8 weeks. After 30 minutes, rats were administrated with Daekumeumja extract. Controls were similarly administrated with the vehicle alone. The weights of gastrocnemius, soleus and plantaris muscles were assessed and the morphologic changes of gastrocnemius and plantaris muscles were also assessed by hematoxylin and eosin staining. In results, The muscles from ethanol treated rats displayed a significant reduction in muscle weight and average cross section area compared to Normal group. Daekumeumja extract treated group showed increased muscle weight and muscle fiber compared to the ethanol treated group. It was concluded that Daekumeumja extract showed ameliorating effects on chronic alcohol myopathy in skeletal muscle.

일광항의 항만개발에 따른 수질변화에 관한 연구 (A Study on Change of Sea Water Quality due to the Development Plan of Ilgwang Harbour)

  • 이중우;국승기
    • 한국항만학회지
    • /
    • 제12권2호
    • /
    • pp.303-312
    • /
    • 1998
  • It is necessary to quantitatively asses the influence of tidal currents to analysis the coastal current patterns before or after constructing offshore structures like as breakwaters. This assesment can be made through the use of simulation models designed to reproduce the water movements of the area. And it is very important to predict a phenomenon of pollutant dispersion in the area. In this study, in order to predict the changes of sea water quality for the port development plan, Ilgwang harbour, located at the east coast of Pusan, the numerical computations were carried out. The flow patterns were investigated before and after the development of the harbour bay and coastal area connected on it. The computational models are an extension of earlier work on the flow which used the ADI Method (Alternating Direction Implicit Method) in appling to Osaka Bay by KANEKO et al. The transport of pollutant constituents depends upon the currental characteristics of the water-transporting medium. In the currental flow model, water velocities and water levels are computed throughout the regions of it. These value are then used in the mass-balance equation to obtain the pollutant-constituent transport. As a result of this research, the present water quality of Ilgwang harbour and the coastal areas connected on it was proved out some good condition. The changes of sea water quality due to the port development plan of the Ilgwang habour bay and the coastal area were not large compared with the present condition, but it will be likely able to get worse by increasing the semi-enclosed areas in the harbour bay. In order to improve the water quality of the area after development, the method to activate tidal exchange in the area can be needed, as a mitigation technique.

  • PDF

일반인이 선호하는 얼굴의 미적 단위별 형태와 비율 연구 (A Study on Preferred Morphologic Feature and Proportion of Facial Aesthetic Subunit by Korean General Public)

  • 윤용일;이동락;유중석;이승철;허지연;김주연
    • Archives of Plastic Surgery
    • /
    • 제37권4호
    • /
    • pp.351-360
    • /
    • 2010
  • Purpose: As the influence of mass media increases, the general standard of attractiveness or beauty of a face also changes. The primary purpose of the study is to find out the factors of the attractive and beautiful face recognized by public. Methods: We picked out standard model photography and operated with Adobe$^{(R)}$ Photoshop$^{(R)}$ and Monariza$^{(R)}$ virtual plastic surgery program. The contour of face, eye, nose, forehead, zygoma, chin and proportion of upper, middle, lower face were changed. The interview survey was conducted through structured standard photo for 310 respondents. That was utilized in the final analysis. Multiple regression analysis was executed by SPSS 12.0. It was used to deal with statistical data and all the other necessary analysis. Results: According to general characteristics of the respondents, many differences were found in preferred face and facial aesthetic subunits. The younger generation preferred the lozenge and inverted triangle shape contour. The respondents over 40 of age preferred the egg shape contour. In chin and zygoma contour, the respondents at the age of 20 preferred distinctly small chin and relatively small lower face. On the other hand, the respondents over 40 of age preferred the wide zygoma relatively. In the proportion of upper, middle, lower face, 51.0% of respondents answered 1 : 1 : 1. If they want to have an aesthetic operation, they preferred protruding forehead. Also they preferred the small chin and V-shaped chin in frontal view. Conclusion: Many respondents preferred to have a plastic surgery for the better facial subunit. The statistical evidence from this study suggests that the harmony and balance of facial aesthetic subunits make attractive and beautiful face.

On the Full Stand Modeling and Tension Control for the Hot Strip Finishing Mill with PID Structure

  • Ahn, Byoung-Joon;Park, Ju-Yong;Chang, Yu-Shin;Lee, Man-Hyung
    • Journal of Mechanical Science and Technology
    • /
    • 제18권7호
    • /
    • pp.1062-1073
    • /
    • 2004
  • We describe a looper controller design for a hot strip finishing mill in steel plants. The main function of the looper system is to balance the mass flow of the strip by accumulating material in the middle of the stands. Another function is to control the strip tension which influences the width of the strip. To ensure strip quality, it is very important to control the tension of the hot strip finishing mill. However, because there is a mutual interaction between the looper angle and the strip tension, it is difficult to control the looper system. Previous researches examined only the operation of a single stand. But it is not sufficient to examine the operation and effect of whole stands because the operation is wholly interdependent. In this paper, we present a full model of the hot strip finishing mill in order to more effectively control strip tension. We propose several control methods for the full-stand hot strip finishing mill, denoted as conventional PI, PI with cross gain, and coefficient diagram method (CDM) PID control. In the real plants, there are some problems by using higher order controllers such as LQ, LQG and H$\_$$\infty$/. By comparison, the PID controller is very simple and easy to apply to all real plants. To that end, we present our findings on PID controls and their potential use in the hot strip finishing mill.

Topography, Vertical and Horizontal Deformation In the Sulzberger Ice Shelf, West Antarctica Using InSAR

  • Kwoun Oh-Ig;Baek Sangho;Lee Hyongki;Sohn Hong-Gyoo;Han Uk;Shum C. K.
    • 대한원격탐사학회지
    • /
    • 제21권1호
    • /
    • pp.73-81
    • /
    • 2005
  • We construct improved geocentric digital elevation model (DEM), estimate tidal dynamics and ice stream velocity over Sulzberger Ice Shelf, West Antarctica employing differential interferograms from 12 ERS tandem mission Synthetic Aperture Radar (SAR) images acquired in austral fall of 1996. Ice, Cloud, and land Elevation Satellite (ICESat) laser altimetry profiles acquired in the same season as the SAR scenes in 2004 are used as ground control points (GCPs) for Interferometric SAR (InSAR) DEM generation. 20 additional ICESat profiles acquired in 2003-2004 are then used to assess the accuracy of the DEM. The vertical accuracy of the OEM is estimated by comparing elevations with laser altimetry data from ICESat. The mean height difference between all ICESat data and DEM is -0.57m with a standard deviation of 5.88m. We demonstrate that ICESat elevations can be successfully used as GCPs to improve the accuracy of an InSAR derived DEM. In addition, the magnitude and the direction of tidal changes estimated from interferogram are compared with those predicted tidal differences from four ocean tide models. Tidal deformation measured in InSAR is -16.7cm and it agrees well within 3cm with predicted ones from tide models. Lastly, ice surface velocity is estimated by combining speckle matching technique and InSAR line-of-sight measurement. This study shows that the maximum speed and mean speed are 509 m/yr and 131 m/yr, respectively. Our results can be useful for the mass balance study in this area and sea level change.

가스발생기 연료개폐밸브의 동적 거동 (Dynamic Characteristics for Fuel Shutoff Valve of a Gas Generator)

  • 이중엽;허환일
    • 한국추진공학회지
    • /
    • 제14권4호
    • /
    • pp.1-9
    • /
    • 2010
  • 가스발생기용 연료개폐밸브는 파일롯 공압으로 포핏을 열고 스프링 힘에 의해 닫음으로써 로켓엔진의 연료 유량을 제어한다. 현재 개발 중인 가스발생기 연료개폐밸브는 액추에이터에서 압력이 제거되더라도 유로부에 해당 압력이 존재한다면 스스로 열림을 유지하는 방식으로 설계되어 있다. 밸브의 성능을 평가하기 위해 밸브가 열리고 닫히는 특성에 따라 힘 평형 상태를 분석할 필요가 있다. 이를 위하여 밸브의 포핏이 열리기 위한 파일롯 압력과 닫히기 위한 유로부 압력을 힘 평형에 의해 조절되도록 설계하였다. 또한, 사용 소프트웨어 인 AMESim을 이용하여 동적 모델을 구성하였고 Fluent CFD 해석을 통해 밸브의 고유유량계수를 구해보았다. 예측과 해석을 통해 획득 된 결과들은 실험 결과와 비교하였고, 밸브의 동적 거동을 실험을 통해 확인하였다.