• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.312-318
• /
• 2022

Robot-based layout automation has been recently promoted for the purpose of improving productivity and quality. Marking robots have various functional demands to secure marking precision and environmental adaptability. In particular, in order to automate marking work of building structure, correction of the marking line through position recognition of rebars placed is required. Because the rebars must maintain a constant cover thickness from the formwork surface, if the rebars are out of planned position, the rebar or marking line need to be corrected to secure the cover thickness. Thus, the marking robot for structural work needs to have the function for determining the position correction of the rebar or the marking line. In order to judge the correction of marking line, it is required to measure the distance between the planned marking line and the rebar placed. Therefore, this study proposes an algorithm that can measure the distance between the planned line and the rebar, and correct marking line for the automatic operation of the marking robot. The results of this study will be utilized as a core function for unmanned operation of the marking robot and contribute to securing precise marking by reflecting construction errors.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.303-309
• /
• 2006

This study intended to compare and analyze marking efficiencies of basic slacks, based on different cloth and production conditions, the width of cloth, the number of marking pieces and the direction for marking deployment and proposed an efficient marking method. The results were as follows. On the whole, the marking efficiencies increased with increasing cloth widths. In the case of small number of marking pieces, the efficiency increased with increasing cloth widths, while, for large number of marking pieces, there was no differences in the efficiency with the cloth widths. From the result of the comparison of the marking efficiencies with the number of marking pieces, it was shown that, in the case of small cloth width, the efficiency increased considerably with increasing number of marking pieces, while, in the case of large cloth width over two markers, there was no distinct effect of the number of markers on the marking efficiency. Thought there were some differences of the marking efficiencies with the marker directions, bi-direction marker was the most efficient marker, followed by one-direction for each size marker and one-direction marker.

• The Research Journal of the Costume Culture
• /
• v.8 no.1
• /
• pp.53-64
• /
• 2000

The purpose of this study is to help efficient use of marking system and more competitive products manufacture through the actual investigation into manufacturing process of apparel products. For lack of the previous study on marking, fundamental survey was performed on systematic research for pattern marking in ready-made production line Data were collected from 36 companies using Apparel CAD/CAM through questionnaire and interview. The data were analyzed by using Frequency and Crosstabs utilizing SPSS. The results were as follows : 1. Marking situation in clothing companies were examined ; 24 companies(66.7%) use computer marking, and 12 companies(33.3%) have both computer marking and hand marking. Besides only 9 companies out of 36(25.0%) have CAM in cutting process. 2. The efficiency in marking methods was also studied and the expense-saved ways were presented. we have found there is no difference in a way of the textural efficiency but the working methods of hand marking and computer marking. 3. Merits and demerits in marking methods were investigated. In case of marking two men's wear (Jacket and Pants), it takes 38 minutes by hand whereas it takes 15 minutes by computer ; for two women's wear (Jacket and Skirt) 49 minutes by hand, and 16 minutes by computer. 4. Most of the markers have less than 5 years experiences and among them most women are less experienced. They are in the mid-twenties after college graduations.

• Journal of the Korean Society of Costume
• /
• v.54 no.1
• /
• pp.97-108
• /
• 2004

This study was conducted to examine the marking efficiency of a dress pattern in order to reduce textile loss by pattern marking. A basic one-piece dress pattern saved to the Yuka CAD System was graded with different sizes and arranged for industrial purpose to calculate the marking efficiency in different conditions. Condition of marking experiment is made it a rule to use 150cm textile width and apply 44, 55, 66 pattern size for three pieces of a dress patterns. The results of the study indicated that the marking efficiency rates of the dress pattern with a separate facing was higher than the one with a self facing. In the dress pattern with a separate facing, the separated seam at center back was appeared to have a higher marking efficiency than the extended seam. It was also found that the efficiency rate was higher in the pattern with a seam at center back when comparing with the dress pattern without a seam. When the marking with a horizontally-loaded collar was compared with a vertically-loaded collar, the efficiency rate was higher for the collar loaded horizontally, The result of the study showed that the type of facing, the location of a seam, and the direction of collar loading were the factors directly related to increasing marking efficiency. The dress patterns marked efficiently in terms of a type of facing, seam, and collar treatment can reduce fabric loss and also shorten the time needed for marking process.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.39-43
• /
• 2013

Titanium has been used to satisfy various applications such as bio engineering, aerospace, electronics, automobile. Recently, micro fabrication technologies of metals such as titanium have been required to satisfy many conditions in various fields. To satisfy these demands, micro electrochemical process using laser marking can be an alternative method because it is one of the precision machining and efficient process. Micro electrochemical process using laser marking needs to accomplish form of the oxidized recast layer on metal surface by laser marking. The laser beam marking conditions such as average power, pulse repetition rate and marking speed should be properly selected to form oxidized recast layer. So, the characteristics of titanium surface according to laser marking conditions was investigated through SEM(scanning electron microscope), EDS(energy dispersive spectrometer) and surface roughness analysis.

• Transactions of Materials Processing
• /
• v.21 no.3
• /
• pp.202-206
• /
• 2012

Marking is a process that engraves letters or a pattern onto the surface of sheet metal. During marking, it is important to set the proper working conditions for clarity of the letters. In this study a simple case for forming circular protrusions by half-piercing and embossing was initially attempted to determine the working conditions which gave good results with respect to shape accuracy. Corner-radius and flatness of circular protrusions made under several experimental conditions were measured and compared. It is shown that the precision of protrusions by half-piercing is superior to that of embossing, and the clearance between punch and die exerts a strong influence on the shape accuracy rather than the penetration percentage into the thickness of the sheet metal. The marking dies for "SNUT" letters, as an example, by applying the above results were manufactured with four different clearances. The working variables for the experiment were clearance and marking depth. For the very shallow depth of 0.1mm the letters were not clearly read. Letters marked under other conditions were easily distinguished with increasing marking depth. It was confirmed that the half-piercing technique with proper values of the working variables gives good quality for the marking of sheet metal.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.85-89
• /
• 1997

The development of the algorithm and the computer aided marking data generation system based on it should precede the automation system for plate forming by line heating method. This paper places emphasis on the yard simulation for a real surface model to justify the algorithm and the computer aided marking data generation system which have been already developed. The yard simulation has been carried out according to the generated marking data and the heating condition produced by the developed computer aided system. The practical applicability of the developed computer aided system has been conformed by comparing the results of the computer simulation to the results of the yard simulation. This paper ends with the extension of the developed marking data generation system.

• Language and Information
• /
• v.17 no.2
• /
• pp.1-27
• /
• 2013

This paper presents a unified approach to multiple nominative and accusative constructions in Korean. We identify 16 semantic relations holding between two consecutive noun phrases (NPs) in multiple case marking constructions, and propose each semantic relation as a licensing condition on double case marking. We argue that the multiple case marking constructions are merely the sequences of double case marking, which are formed by dextrosinistrally sequencing the pairs of the same-case marked NPs of same or different type. Some appealing consequences of this proposal include a new comprehensive classification of the sequences of same-case NPs and a straightforward account of some long standing problems such as how the additional same-case NPs are licensed, and in what respects the multiple nominative marking and the multiple accusative marking are alike and different from each other.

• The Research Journal of the Costume Culture
• /
• v.17 no.5
• /
• pp.746-757
• /
• 2009

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern, width of materials, and marker orientation using man's shirts. To compare the marking efficiency of shirts, plain and check-patterned materials with the intervals of $1.5{\times}1.5cm$, $3{\times}3cm$, and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on materials width, the highest efficiency was obtained with nap-either-way position of 150cm, plain materials and lowest efficiency with nap-one-way position of 150cm, $5{\times}5cm$ check-pattern materials. Regardless of the direction of marker position, the marking efficiency of 150cm width was higher than 110cm width in the plain, $1.5{\times}1.5cm$ and $3{\times}3cm$ check-pattern interval, but the marking efficiency of 110cm width was higher than 150cm width in the $1.5{\times}1.5cm$ check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and material width, the highest efficiency was obtained with nap-either-way position. And nap-up-and-down and nap-one-way follows next. Third, in the comparison of marking efficiency depending on check-pattern interval, the efficiency of plain materials was higher than those of check-patterned materials. And increasing the intervals decreased marking efficiency and vice versa. So the lowest efficiency was obtained with $5{\times}5cm$ check patterned materials.

• The Research Journal of the Costume Culture
• /
• v.18 no.1
• /
• pp.13-28
• /
• 2010

This study is focused on the elucidation of efficient and correct marking methods by comparing and analyzing marker efficiency depending on the marking job condition such as interval of checking-pattern and marker orientation using woman's Jacket and Slacks. Research Method intended to compare the marking efficiency of Jacket and Slacks, check-less and check- patterned materials with the intervals of $1.5{\times}1.5cm$ and $5{\times}5cm$ were selected. First, in the comparison of marking efficiency depending on check-pattern interval, regardless of the direction of marker position, single-item makers and set-item makers, the efficiency of check-less materials was higher than those of check-patterned materials and increasing the intervals decreased marking efficiency and vice versa. Marking efficiency of Slacks was less influenced than marking efficiency of Jacket by check-pattern interval. Second, in the comparison of marking efficiency depending on the direction of marker position, regardless of check-pattern interval and number of maker pieces, the efficiency of nap-up-and-down position was higher than those of nap-one-way position. Third, the marking efficiency of single-item was more effective than one of set-item in all working condition except nap-one-way position in checkless materials.