• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.379-381
• /
• 2008

TETRA(Terrestrial Trunked Radio) is a digital trunked radio standard developed by the ETSI(European Telecommunications Standards Institute). Currently, TETRA was set Digital TRS in electric power If wireless backbone network. In this time, we use many company's TETRA modem. So, TETRA modem performance evaluation is very important. TETRA modem use two type of Data transfer mode. One is Packet Data using UDP/IP. and the other is SDS(Short Data Service). In this paper, We generate Packet Data using Traffic Generator module. Packet Data transfer 1000 times each 10 bytes to 400 bytes. We analyze transmission delay time, success rate and standard deviation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1423-1432
• /
• 2011

Since the marine accidents increase with the increased volume of traffic, preventive surveillance technology for safety navigation of the ships before the accident is being emphasized to secure the safety at sea along with post-accident measures. This paper aims to suggest a design based on an integrated safety management platform systems to support nautical safety, implements of bridge operation terminal equipments and alarm system for bridge watch monitoring and abnormal state of navigation/propulsion/machinery/power, and performs a quality evaluation for the actual boarding on the ship based on the classification standards.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.59-65
• /
• 2003

For safe passing the waterway crossing bridge without collision with bridge-piers under poor visibility circumstances, it is very important that the pier should be detected definitely as earlier as possible by radar, In this study, the required length of Projecting part of the bridge pier for definite radar recognition was obtained by theoretical and experimental analyses. By presenting the required values depending on the maximum vessel size and passing condition, it is expected possible to design the bridge pier protecting system appropriately suitable to traffic environment of the waterway.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.85-92
• /
• 2003

Sea areas outside Mokpo-Gu are not routed to a fairway, and PTMS is not done there. And there are many dangerous elements because some fairways are crossed In this papar, we proposed a maritime traffic system which was designed with expert group's knowledge for sqfe navigation in the area and PIANC rule(1980).

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.70-78
• /
• 2006

This paper has addressed the scheme to design single rate Rate Adaptive Shaper (srRAS) proposed in RFC2963. srRAS is the shaper used in conjugation with downstream single rate Three Color Marker (srTCM) described in RFC269. it is tail-drop First Input First Out (FIFO) queue that is drained at a variable rate. srTCM meters IP packet streams from srRAS and marks its packets to be either green, yellow, or red. This shaper has been proposed to use at the ingress of differentiated services networks providing AF PHB. And then srRAS can reduce the burstiness of the upstream traffic of srTCM. This paper addresses algorithm, architecture of srRAS, and the scheme to implement srRAS using Field-Programmable Gate Arrays (FPGA) and the related technology.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.197-202
• /
• 2004

It is well known that the hydrodynamic interaction forces between ship and bank wall affect ship manoeuvring motion. This paper deals with the interaction effect acting on a ship navigating closely in the proximity of bank wail. In this paper, the calculation method based on the slender body theory for estimation of the hydrodynamic interaction forces between ship and bank wail is applied. The hydrodynamic interaction forces acting on a ship during passing through the proximity of the bank wail are predicted to evaluate an influence of these interaction forces on ship manoeuvrability. The calculation method used in this paper will be useful for prediction of ship manoeuvrability at the initial stage of design, for automatic control system of ship in confined waterways, for discussion of marine traffic control system and for construction of harbour.

• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.639-643
• /
• 2003

The emphasis is put on the detailed knowledge on manoeuvring characteristic for the safe navigation while avoiding terrible collision between ships and on the guideline to the design and operation of the ship-waterway system The numerical simulation of manoeuvring motion was carried out parametrically for different ship types, ship-velocity ratios, separation and stagger between ships. As for the calculation parameters, the ratios of velocity difference (hereafter, $U_2$/$U_1$ ) between two ships were considered as 0.6, 1.2, 1.5. From the inspection of this investigation, it indicates the following result. Considering the interaction force only as parameter, the lateral distance between ships is necessarily required for the ship-velocity ratio of 1.2, compared to the cases of 0.6 and 1.5 regardless of the ship types. Furthermore, regardless of the ship-velocity ratio, an overtaking and overtaken vessel can be manoeuvred safely without deviating from the original course under the following conditions: the lateral distance between two vessels is approximately kept at 0.5 times of ship-length and 5 through 10. degrees of range in maximum rudder angle. The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• Journal of Environmental Science International
• /
• v.10 no.3
• /
• pp.209-216
• /
• 2001

Dustfall particles were collected by the modified American dust jar (wide inlet bottle type) at 6 sampling sites in Pusan area from March, 1999 to February, 2000. Thirteen chemical species (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Ni, Pb, Si, and Zn) were analyzed by AAS and ICP. The purposes of this study were to estimate qualitatively various bulk deposition flux of dustfall and insoluble components by applying regional and seasonal distribution. Dustfall amount of regional variations were found in order of coastal zone, industrial zone, commercial zone, agricultural zone and residential zone, and seasonal total dustfall had higher concentrations during spring for 6.741 ton/${km}^2$/season, lower concentrations during summer for 1.989 ton/${km}^2$/season, and annual total concentration was 17.742 ton/${km}^2$/year. The regional distributions of enrichment factor show well-defined anthropogenic metals (Cd, Cu, Pb, and Zn) at industrial and agricultural zone, and contribution rate of soil particles were found in order of summer, fall, winter and spring. Factor loading effects of chemical composition of dustfall were found in order of road traffic emission source and combustion processed source, industrial activity source, soil source and marine source.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.289-294
• /
• 2010

In the vehicle communication system, transferred information is needed to be detected as possible as fast in order to inform car status located in front and rear side. Through the moving vehicle information, we can avoid the crash caused by sudden break of front one or acquire to real time traffic data to check the detour road. To be connecting the wireless communication between the vehicles, fast timing synchronization can be a key factor. Finding out the sync point fast is able to have more marginal time to compensate the distorted signals caused by channel variance. Thus, we introduce the combination method which helps find out the start of frame quickly. It is executed by auto-correlation and cross-correlation simultaneously using only short preambles. With taking the absolute value at the implemented synch block output, the proposed method shows much better system performance to us.

• Journal of the Korean Institute of Navigation
• /
• v.23 no.3
• /
• pp.1-15
• /
• 1999

Recently, due to the several factors such as the advent of very large vessels and high-speed vessels, and the increase of the maritime traffic density at sea, the obligation, responsibility and burden of marine officers on duty for the safety of navigation has been highly escalated. Under these situations, if the appropriate and correct navigational information is given to officers at real time by means of certain integrated information processing system, these obligation, burden and danger can be reduced. This paper deals with the study on the development of the Navigational Information Monitoring and Recording System that can give and record the integrated navigational information based on the personal computer system installed on board. To construct this system, the interface unit which changes different signal types of navigational equipments to NMEA 0183 signal format and the application software to show the visual navigational information were developed. In this study, the navigation system of T/S HANBADA in Korea Maritime University was used in order to construct the actual system that can be utilized in other ships, and also the performance test was carried out several times to examine the performance of the system developed. It was proved that all functions of the system as designed worked smoothly through the performance test. Also this system could be operated easily and conveniently by every user.