• 수산해양기술연구
• /
• 제53권3호
• /
• pp.256-265
• /
• 2017

Seafood is attracting attention as a future food industry. In recent years, the demand for fishery equipment of mechanization, automation, and unmanned was increased due to the environment affected by seafood processing, stricter regulations on safety, decline and aging of fishery worker. Ark shell (Scapharca subcrenata) was being produced in many steps in the production process. The process has been made such as collection-landing-washing-first sort (goods/non-goods)-transports-second sort (size). It was undergone first and second steps by delivering to the consumer. Here, the first step is to sort goods to collection and the second step is to sort by size. The fishery workers need ten people in first step and six people in second step. The workload of one hour per kg is 4,247 kg/h in first step and 2,213 kg/h in second step. In addition, the goods ratio by work process was 79% in first step and 98% in the second step. In this process, a lot of fishery worker and working time is needed. Therefore, this study developed elemental techniques for an automated size sorting system considering the working process problem, time and situation for washing and sorting of ark shell.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.448-459
• /
• 2022

Generally, steel is the most commonly used in the industry because of good strength, processability and cost-effectiveness. Steel can be surface-treated such as coating or used as an alloy by adding elements such as Cr, Ni, Zr, and Al to increase corrosion resistance. However, even if steel is used in same environment corrosion resistance is sharply lowered when it is exposed to a high temperature for a fixed or extended period of time due to an overload or other factors. In particular, the use of hot-dip aluminized plated steel, which is used in high-temperature atmospheres, is increasing due to the surface Al₂O₃ oxide film. This steel necessitates an urgent solution as issues of corrosion resistance limitations often appear. It is an important issue that not only cause analysis but also the research for the surface treatment method that can be solved. Thus, in this study, Cr in which it is expected to be effective in corrosion resistance and heat resistance attempted to deposit on hot dip aluminized plated steel with PVD sputtering. And it was possible to present the surface treatment application of various types of industrial equipment exposed to high temperature and basic design guidelines for use by confirming the corrosion resistance of hot dip Al-Si plated steel with Cr film deposited at high temperature.

• 한국해양공학회지
• /
• 제23권2호
• /
• pp.92-97
• /
• 2009

In order to export aircraft components or substructures, it is necessary to get a certification from the main company for the components or an airworthiness certification from the FAA. In Korea, those processes are performed by a small number of private companies for aircraft components. However, airworthiness certification has never been done in the company. To export an assembled aircraft, whether small or large, it is obligatory to get a certification for the aircraft being exported. Currently, the Korean government is trying to get BASA agreement in a few years. For a mid-size company, it is easier to get the NADCAP audit process for the supply of aircraft components to the main company. In this paper, the overall process of aircraft certification is discussed and airworthiness certification is treated for export aircraft. Moreover, the NADCAP audit process is described in detail by introducing example parts made of composite material. This detailed process would be very helpful to a small or mid-size company that wants to develop and deliver aircraft components to foreign companies.

• 한국생산제조학회지
• /
• 제25권1호
• /
• pp.42-47
• /
• 2016

This paper presents the development of a floating outboard type of compact water jet propulsion system. The planning case of the water jet system is developed by performing precision processing after manufacturing FRP (Fiber Reinforced Plastics) from plug mold casting. This system is composed of an intake, impeller, diffuser, reverse bucket, and main shaft. In addition, a rebuilt engine was applied through marine engineering. The water jet propulsion system performance was verified to discharge a maximum $0.29m^3/s$ of flow rate and 37 m/s of flow velocity in a test pool on land. A field test was performed by installing the water jet propulsion device on board a ship that was tested off the coast of Korea. The weight of the hull, engine, and other equipment was approximately 1.2 tons, and the sailing speed was a maximum 22 knots at 3,600 rpm.

• 한국전자거래학회지
• /
• 제19권2호
• /
• pp.75-93
• /
• 2014

본 연구에서는 공리적 설계 방법론을 기반으로 조선소의 블록 물류 운영 시스템을 효과적으로 설계하는 방법을 다룬다. 체계적인 설계를 위하여 블록 물류 운영 시스템의 독립적인 기능 요구를 정의하고 이를 만족시키는 설계 파라미터를 정의한다. 그리고 기능 요구들과 설계 파라미터들 사이의 상관관계를 고려하여 구현 순서를 결정한다. 설계 결과는 IDEF0 모델링을 이용하여 제시하였다. 설계된 시스템은 국내 한 조선소에서 구현되었으며, 현장에 적용되고 있는 사례를 분석하여 함의를 도출한다.

• Journal of Mechanical Science and Technology
• /
• 제20권7호
• /
• pp.972-980
• /
• 2006

In general, to send out natural gas via a pipeline network across the nation in LNG terminal, high-pressure cryogenic pump supply highly compressed LNG to high-pressure vaporization facilities. The Number of cryogenic pumps determined the send-out amount in LNG receiving terminal. So it is main equipment at LNG production process and should be maintained on best conditions. In this paper, to find out the cause of high vibration at cryogenic pumps-motor system in LNG terminal, vibration spectrum analysis and motor current signature analysis have been performed together. Through the analysis, motor rotor bar problems are estimated by the vibration analysis and confirmed by the current analysis. So, it is demonstrated through the case study in this paper, how performing vibration analysis and current signature analysis together can reliable diagnosis rotor bar problems in pump-motor system.

• 해양환경안전학회지
• /
• 제28권6호
• /
• pp.965-972
• /
• 2022

본 연구는 10톤 미만 어선의 내항성능 기반의 해양활동 기준 마련을 위한 기초 연구이다. 10톤 미만의 어선은 우리나라 등록어선의 약 95%를 차지하고 있고 항해, 조업 등의 해양활동 중에 사고와 인명손실도 많이 발생하고 있다. 이에 따라 해양수산부에서는 어선 출항통제기준을 정하여 풍랑주의보 발효 시 어선의 운항을 제한하고 있지만 선박톤급과 파고에 따른 기준 없이 동일하게 적용하고 있어 해양활동 시 파고에 의한 선박의 동요에 많은 차이가 있을 수 있다. 파고에 의한 선박의 동요는 승선감 및 장비의 성능을 떨어뜨려 해양사고의 요인이 될 수 있으므로 항해, 조업 등 안전한 해양활동 확보를 위해서 파랑 중 내항성능 검토가 필요하다. 하지만 어선에 대한 내항성능 기반 기준 마련 검토는 부족한 실정이다. 이에 따라 우리나라 연안조업어선 10톤급(G/T 9.77톤) 어선을 대상으로 내항성능을 평가하였고 설정된 내항성능 평가 기준의 Operation과 Survival 기준을 적용하여 유의파고와 선속에 따른 해양활동 충족 정도를 해석하였다. 해석 결과 횡동요는 유의파고 0.4m부터 Operation 기준을 초과하였고 유의파고 2.2m부터 Survival 기준을 초과하는 것으로 나타났다. 종동요는 유의파고 1.7m부터 Operation 기준을 초과하였고 유의파고 3.0m까지 Survival 기준은 넘지는 않았으나 횡동요가 유의파고 2.2m부터 Survival 기준을 초과한 상태로 안전하다고 할 수 없다. 따라서 10톤 미만 어선은 풍랑주의보 발효 전까지 출항은 가능하나 해양활동 관련하여 내항성능 평가 기준에는 충족하지 못한다고 볼 수 있다. 본 연구에서는 10톤급 어선을 대상으로 제한적으로 평가 되었으나 해양활동 기준 마련에 큰 도움이 될 것으로 판단된다.

• 수산해양기술연구
• /
• 제55권3호
• /
• pp.198-205
• /
• 2019

The small yellow croaker (Larimichthys polyactis) is one of the representative high-class fish species in Korea. The catch of small yellow croaker in adjacent water fisheries has been continuously decreasing from 59,226 tons in 2011 to 19,271 tons in 2016. The small yellow croaker is caught by gillnet, stow net and bottom trawl, among which about 55~65% is caught by gillnet. For the sustainable use of small yellow croaker, the fishing power of small yellow croaker drift gillnet is very important. Therefore, the change of fishing power index were analyzed to identify the development of the vessel and gear technology that may have improved the fishing efficiency of the small yellow croaker drift gillnet fishery from 1960s to 2010s. Gross tonnage and horse power per fishing vessel was increased annually. The mesh size was 75.0 mm in the 1960s, but reduced to 60.6 mm in the 1980s and to 51.0 mm in the 2000s. In the 1960s, it was hauled out by manpower. However, the net hauler were modernized and supply rate was also increased since 1970. Due to the mechanization of the net hauler, the number (length) of used net gradually increased from 1.5 km in the 1960s to 7.5 km in the mid-1980s and to 15 km in 2010. Colour fish finders and positioning system were introduced and utilized from the mid-1980s. Surveys on the supply and upgrading of fishing equipment utilized visiting research. Therefore, the relative fishing power index in the small yellow croaker drift gillnet fishery increased from 1.0 in 1980 to 0.8 in 1970, to 1.1 in 1990, to 1.6 in 2000 and to 1.9 in 2010. The results are expected to contribute to reasonable fisheries stock management of the small yellow croaker drift gillnet fishery.

• 대한지리학회지
• /
• 제39권1호
• /
• pp.116-131
• /
• 2004

본 연구의 목적은 조선산업 하청구조의 공간 특성을 고찰하는 것이다. 오늘날 기업은 다른 기업과 연관된 생산시스템을 통하여 기업의 목표를 달성해 나간다. 복잡하고 거대한 플랜트를 건조하는 조선산업의 하청구조는 모기업과의 거래관계를 규정하는 공간적 요인에 따라 상이한 특성을 보이고 있다. 우선 모기업의 생산공정에 직접 참여하는 사내하청기업이나 사외지역의 협동화단지업체들은 분사화된 특성을 보이면서 밀접하게 연결되어 있다. 그리고 기계산업으로 특화되어 있는 창원이나 전통적으로 조선기자재산업이 발달한 부산지역 업체들은 전문화의 정도가 상대적으로 높아 하청관계가 비교적 강하게 연결되어 있다. 이에 비해 비국지적으로 분포하거나 표준화된 제품을 공급하는 하청기업들은 대부분 연결도가 낮게 나타난다. 조선산업의 성숙한 발전을 위해서는 모기업 주변의 사내ㆍ외지역에 집적하는 조선전문 하청기업들과의 집중적 협력과 함께 기술적으로 특화된 원거리 업체들과의 선택적 거래관계를 강화해야 할 것이다.

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.435-442
• /
• 2011

In an attempt to respond to the increase in international oil prices and reduce operating expenses, ship remodeling was carried out on a 740ton class tuna purse seiner. To strengthen the competitiveness of the fisheries industry by improving vessel performance, a bulbous bow was newly equipped. The slipway and rudder area were also lengthened and enlarged with the propeller and main engine remained unchanged. To reduce the hull resistance, a circle type bulbous bow was attached on the hull behind bow thruster and thus the cost for exchanging electrical equipment for bow thruster was reduced. The new rudder area was expanded 15% more than the old one within the extent that the existing mechanical control part and rudder stock were not changed. To prevent fishing net damage and stabilize wake field, slipway was lengthened to the optimal position. All of the new design of remodeling parts went through the model tests in towing tank and CWC. Besides resistance test, all of necessary model test results were delivered for hydrodynamic character for the modified ship. The maneuvering simulation to verify that the remodeled ship satisfies the IMO rules was performed in both zigzag and turning tests. The estimated resistance with new bulbous bow and lengthened stern was reduced by 4.8% in the 2-dimensional analysis and 17.4% in the 3-dimensional analysis in comparison of conventional ship. The average reduction of resistance was estimated about 10%. Maneuvering character of modified hull form was found to satisfy all regulations under IMO. The remodeling of tuna purse seiner can not only improve fishing performance but also contribute to reduction of operating cost by saving energy for the fisheries industry.