• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.60-64
• /
• 2013

Water injection pump produced the 1st oil well through the high pressure after the Deep water oil well drilling. After finish the work it is hard to produce only using itself pressure due to low pressure. Therefore it can be increased recovery factor through the injection seawater of high pressure. Is the key equipment used in the marine plant and it is developing at many industries. In this paper, Analyze changes in the natural frequency due to the stiffness of the bearing. Analyze the critical speed of the natural frequency due to the change of operation speed. And evaluate the Stability. And then analyze the displacement and clearance through the unbalance response this way has contributed to the reliability of the developing product. Through a mathematical analysis.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.907-915
• /
• 2020

Specification selection, Layout, specifications and combinations of Power Drives, and Ship motions were studied for FGPP(Floating Gas-fired Power Plants), which are still needed in areas such as the Caribbean, Latin America, and Southeast Asia where electricity is not sufficiently supplied. From this study, the optimal equipment layout in ships was derived. In addition, the difference between engine and turbine was verified through LCOE(Levelized Cost of Energy) comparison according to the type and combination of Power Drives. Analysis of Hs(Significant Height of wave) and Tp(spectrum Peak Period of wave) for places where this FGPP will be tested or applied enables design according to wave characteristics in Brazil and Indonesia. Normalized Sloshing Pressures of FGPP and LNG Carrier are verified using a sloshing analysis program, which is CFD(Computational Fluid Dynamics) software developed by ABS(American Bureau of Shipping). Power Transmission System is studied with Double bus with one Circuit Breaker Topology. A nd the CFD analysis allowed us to calculate linear roll damping coefficients for more accurate full load conditions and ballast conditions. Through RAO(Response Amplitude Operator) analysis, we secured data that could minimize the movement of ships according to the direction of waves and ship placement by identifying the characteristics of large movements in the beam sea conditions. The FGPP has been granted an AIP(Approval in Principle) from a classification society, the ABS.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.63-72
• /
• 2022

The number of deaths caused by power crane accidents continues to decline. Nevertheless, more than 50 people die each year due to these accidents. Various types of slings, such as wire rope sling, chain sling, belt sling, and grommet, are used in industries, depending on the characteristics of the work involved. To reduce the number of accidents involving these slings, the formulation of technical measures and education of workers are necessary. This study compares and analyzes local and international guidelines as well as those found in manufacturer manuals in relation to grommets, which are widely used in shipyards and construction sites. Moreover, measures for improving the safety of work using grommet are reviewed. This paper further proposes the revision of the technical guidelines of the Korea Occupational Safety and Health Agency such that the information directly affecting the safety of work involving grommets is included. By clarifying the guidelines that manufacturers provide in their manuals, accident prevention through worker awareness is anticipated in the future.

• 한국안전학회지
• /
• 제38권4호
• /
• pp.60-67
• /
• 2023

Various lifting slings are used in domestic industrial sites depending on the purpose, form, and environment. Each sling has its characteristics, and safe lifting work is possible when its performance meets the regulations. Therefore, this study analyzed domestic and foreign regulations and guidelines related to chain slings. It identified significant problems by analyzing the chain-sling-related disaster cases. The current status of chain slings used by various industries and the ways to improve chain sling safety were studied. The major chain sling issues were: 1) employing improper components to chains, 2) having different safety coefficients between the regulation and industrial standards, and 3) using chains unsuitable for lifting purposes. Based on these issues, the following measures were proposed to improve chain sling work safety: 1) revise the safety coefficient requirements under the Regulations on Occupational Safety and Health Standards, 2) disseminate specialized sling courses, and 3) strengthen on-site chain slings-related training. In the future, this study is expected to minimize chain use mistakes by unifying the safety coefficient related to chain slings and recognizing the importance of correctly selecting components employed in the chain.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.66-71
• /
• 2011

Recently, the production of shipbuilding and offshore plant industries, with a trend toward large structures, has led to an increased use of high strength ultra-thick plates. The use of ultra-thick plates increases the welding tasks, and the welding process generates distortion and residual stress in the weldment because of the rapid heating and cooling. Welding distortion and residual stress in the welded structure resulte in many troubles such as deformation and life deterioration. In particular, the welding residual stress has an important effect on welding deformation, fatigue, buckling strength, brittleness, etc. The purpose of this study was to evaluate the residual stress at a multi-pass weldment using an experimental method for EH36 high-tension steel. In this experimental method, AIS3000 was used to measure the residual stress of a welded part, HAZ, and base metal; EPMA and XRD were used to study the material properties.

• 해양환경안전학회지
• /
• 제22권3호
• /
• pp.268-277
• /
• 2016

This paper aims at presenting bunkering educational programs for LNG fueled ship taking into consideration existing similar education programs and safety systems at the international level in order to enhance both seafarers' and vessels' safety. Heavy fuel oil has typically been used as fuel of ship propulsion. The competitiveness of the fuel oil is recently getting weak in terms of cost and environmental aspects. Liquefied natural gas is introduced for ship propulsion in the maritime field as a new energy source replacing heavy fuel oil. In order to prepare for installation and operation of LNG fueled propulsion ship on board, International Maritime Organization has discussed this subject for about 10 years. As a result of the discussion on such ships in IMO, the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels entered into force on the year 2015. International organizations and several countries therefore drives actively entire researches and other businesses with a view to providing equipment and system of LNG bunkering. The systems are divided into ship-to-ship transfer, terminal / pipeline-to-ship transfer and truck-to-ship transfer. By adopting transfer system of LNG bunkering, many human resources will be needed in these areas on scene as well as on managing, operating, trading, finance, design of LNG bunkering industries. LNG bunkering is just in the beginning stage. Hence, this paper reviews and proposes professional educational programs of LNG bunkering in consideration of technical aspects of the safety system of LNG bunkering based on the types of bunkering systems.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.129-130
• /
• 2017

본 연구에서는 쌍동형 카페리에 대한 기본 구조 설계 및 구조 해석을 위한 기법을 제시한다. 카페리와 같이 길이 50미터 이상 길이와 폭/비가 12보다 큰 중/소형 고속 선박의 강도 해석에 대한 규정이나 방법론은 아직까지 명확하게 제시되지 않고 있다. 따라서 본 논문에서 부재의 스캔틀링은 한국선급기준을 적용하였고, 설계안에 대한 구조강도 검증을 위해서 카페리 전용선박 기준에 의해 추가적으로 검증하였다. 특히, 카페리 전용선박 기준을 적용하여, Hull girder ultimate strength를 추가적으로 수행하여, 현재 기준에 의한 설계의 모호성을 극복하도록 제안하였다. 본 연구를 통해 도출된 연구 결과는 앞으로 고속 쌍동형 카페리의 구조설계 및 구조해석에 관련된 기본적인 자료로 유용하게 활용될 것으로 예상된다.

• 해양환경안전학회지
• /
• 제25권4호
• /
• pp.482-488
• /
• 2019

최근 수상 레저 사업장과 레저기구의 개수는 지속해서 성장하고 있다. 수상레저기구 중에서도 카약과 카누의 보급률이 크게 증가하고 있다. 기존에는 주로 FRP 재료를 사용하여 제작하였으나, 지구온난화, 천연자원 고갈 등의 문제로 인해 청정에너지 및 신재생 에너지에 대한 필요성이 대두됨에 따라 탄소섬유에 대한 수요도 빠르게 증가하고 있다. 본 연구에서는 이러한 사회적인 변화 의식에 부합하기 위하여, 탄소섬유를 적용한 보급형 카약을 설계하고, 제품의 신뢰성을 검증하기 위하여 저항성능 및 구조 안전성 평가를 수행하였다. 속도 변화에 따른 압력저항과 마찰저항 변화를 검토하였으며, 속도 2.6 m/s 이상에서는 압력저항이 크게 증가하면서 전체저항이 커지는 현상이 발생한다. 현재 카약 구조는 운용 시 고려할 수 있는 설계하중을 고려 시, 충분한 안전율을 갖고 있음을 확인하였다.

• 해양환경안전학회지
• /
• 제25권1호
• /
• pp.122-129
• /
• 2019

신조 방식의 제조업의 특성상 경기 사이클이 존재하기 때문에, 장기적으로 이를 대처할 동반 산업이 절실하게 필요로 하고 있다. 이러한 요구에 적합한 분야가 수리조선업 분야이다. 수리조선업을 운영하기 위해서는 플로팅도크가 필수적으로 필요로 하며, 대부분 노후화된 플로팅도크를 해외로부터 수입한 후, 개/보수를 통하여 운용하고 있다. 그러나, 사용연한이 최소 30년 이상이고, 운용 시 특정 선급에 입급을 시키지 않기 때문에, 안전성에 대한 정확한 지침은 전무한 상태이다. 본 연구에서는 노후화된 플로팅도크의 계측한 두께 정보를 활용하여, 구조강도 검토를 수행하고, 운용중인 플로팅도크의 잔류 구조강도를 분석하였다. 연구를 통하여 도출된 주요 결과들은 유사 설비의 구조 안전성 검토에 대한 가이드라인을 참조할 수 있으며, 개/보수 시 이러한 방법을 활용하면 빠른 시간 내에 최적 해를 찾을 수 있을 것으로 기대된다.

• 해양환경안전학회지
• /
• 제27권2호
• /
• pp.394-401
• /
• 2021

신재생에너지 신규설비 보급이 매년 꾸준히 증가하고 있으며, 그중 개발 확장성이 풍부하고 생산유발계수가 큰 해상풍력 시장이 급성장하고 있다. 특히 서남해 권역은 최고 수준의 해상풍력 잠재량을 보유하고 있으며, 관련 프로젝트들이 추진 중이다. 본 연구는 점토층 지반에 효과적인 해상풍력 하부구조물의 개발에 있어 EUROCODE에 의한 구조물의 설계 절차를 제시하고 구조 안전성을 고찰하여 관련 기술 분야에 이바지함을 목표로 한다. 선행연구에서는 풍력발전기 용량이 5MW급을 주요 대상으로 하였으나, 서남해 해상풍력발전기 시장의 기술 추세에 부합하는 발전 용량 8MW급을 연구 모델로 선정하였다. 이에 본 연구에서는 서남해 지질 조건에 부합하는 하부구조물을 개발하고, 구조 안전성을 유한요소법을 활용하여 검증하였다. 초기 설계안에서 일부 구간을 보강하여 구조 안전성을 확보하였다. 본 연구 결과를 기반으로 하여, 향후 다양한 형태의 하부구조물에 대한 구조 안전성 평가가 가능하며, 전문화된 구조 설계 및 평가 기준을 확립하였다.