• Journal of the Korean Society of Food Culture
• /
• v.2 no.1
• /
• pp.45-54
• /
• 1987

This paper is a part of the regional characteristics of Korean chotkal. The kinds and materials of Korean chotkals are studied by interviewing local people living in 142 different regions which are bigger than 'myon' in size. Regions are classified according to the structural style of commoner's house. Regional characteristics of chotkal are analyzed and interpreted with natural environmental factor. The rest of my further interested subject will be followed in later issues ; the ways of preservation, period of fermentation according to the regional characteristics and uses of Korean chotkal. The results of this study can be summerized as follows, 1. There are 145 different kinds. 2. Raw materials of 145 kinds of chotkal are devided roughly into five groups ; (1) fishes in 87 kinds (2) Pelecypoda and Gastropoda in 14 kinds (3) Cephalopoda in 10 Kinds (4) Crustacea in 32 kinds and (5) Holothuroidea and Echinoidea in 2 kinds. They can also be classified according to the parts of individual material ; (1) body or flesh in 118 kinds (2) internal organs in 15 kinds and (3) eggs in 12 kinds. Regions are devided into four provinces ; 'Kwanso', 'Chungbu', 'Nambu', and 'Kwanbuk' in which the number of different kinds of chotkal are 32, 41, 99 and 34, respectively. Raw materials vary because of the distribution of marine life in different regions. Fishes and Cephalopoda are used in all four regions, Pelecypoda and Gastropoda in 'Kwanso', 'Chungbu' and western part of 'Nambu' regions. Different species of Crustacea used in each different regions ; sea crab and sea shrimp in the western coastal area, fresh water crab in the field area, fresh water shrimp in 'Chollado', mantis crab at 'Shihung-gun' in 'Kyonggi-do', Holothuroidea and Echinoidea are used in 'Nambu' regions. Chotkal are not used at all in six local districts which are located in inland areas where the transportation is inconvenient.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.785-791
• /
• 2008

Because of increasement on the transportation of goods by ship and the operation of coastal ships for leisure, the interest of marine parts is growing up lately and then the safe navigation of ships are essential. In these circumstances, it is necessary that it should be examined the regulation of vessel traffic control in effect. Therefore, the wave height is analyzed on korean coast, and then the seakeeping performance with the wave height and the various hull types on operating on the coast is evaluated. These results will be helpful to the improvement of the regulation of vessel traffic control and safe navigation of coastal passenger ships.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.43-55
• /
• 2013

In general, huge caissons for breakwaters have been constructed on land or a floating dock. In the case of the construction on a floating dock, a 4 step installation procedure is involved: i) construction on a floating dock, ii) transportation by the floating dock to an area near the target sea, iii) launching from the floating dock, and iv) transference by tug-boats to the installation site. It is especially important to pay attention to the dynamic stability of the floating dock against the conditions in the sea during steps i) and iii). In this paper, the static and dynamic stabilities of a caisson on a floating dock are evaluated based on IMO rules during the construction and launching of the caisson on a floating dock by using independent commercial S/Ws such as NAPA, WAMIT, and CHARM3D.

• Journal of Ship and Ocean Technology
• /
• v.5 no.1
• /
• pp.1-13
• /
• 2001

As Indonesia determines to increase its marine fishery production, the development of tradi-tional boatyards has to be included in the agenda as it will give the local fishing communities a better chance to compete with large capital intensive fishing companies. It will also spread job opportunities evenly throughout the country instead of concentration fishing vessel con- struction in a few large shipyards located primarily on the highly populated island of Java. However development every single boatyard in indonesia would not only be prohibitively ex-pensive, but it would also create social tensions as the introduced technology would not be immediately accepted by the rural societies whose own traditions are still culturally signif-icant. Both these problems can be reduced by developing a collaborative scheme between traditional boatyards and a larger shipyard. The shipyard, with modern facilities, can develop work packages containing knock down components which are then assembled in the tradi-tional boatyards. The work packages are planned and designed so that every component can be assembled with relatively simple tools. Radical changes can be avoided as new techniques can be introduced gradually, responding to the boatyard\\`s own requirements and aspirations. While this manufacturing procedure is conceptually straightforward its efficient implemen-tation is in practice complicated by the fact that each traditional boatyard has unique char-acteristics in terms of labour resources, technological capability, and transportation links. By developing a computer model to simulate the interaction between the main shipyard and small traditional a computer model to simulate the interaction between the main shipyard and small traditional boatyards work packages can be designed that ensure that activities at all manufacturing locations are efficient.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.69-85
• /
• 2019

BeiDou navigation satellite system (BDS) is one of the four main types of global navigation satellite systems. The current system has been widely used by the military and by the aerospace, transportation, and marine fields, among others. However, challenges still remain in the BeiDou system, which requires rapid responses for delay-sensitive devices. A differential positioning algorithm called the data center-based differential positioning (DCDP) method is widely used to avoid the influence of errors. In this method, the positioning information of multiple base stations is uploaded to the data center, and the positioning errors are calculated uniformly by the data center based on the minimum variance or a weighted average algorithm. However, the DCDP method has high delay and overload risk. To solve these problems, this paper introduces edge computing to relieve pressure on the data center. Instead of transmitting the positioning information to the data center, a novel method called edge computing-based differential positioning (ECDP) chooses the nearest reference station to perform edge computing and transmits the difference value to the mobile receiver directly. Simulation results and experiments demonstrate that the performance of the ECDP outperforms that of the DCDP method. The delay of the ECDP method is about 500ms less than that of the DCDP method. Moreover, in the range of allowable burst error, the median of the positioning accuracy of the ECDP method is 0.7923m while that of the DCDP method is 0.8028m.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.3
• /
• pp.173-182
• /
• 2021

The maneuvering performance of a ship on the actual sea is very different from that in calm water due to wave-induced motion. Enhancement of a ship's maneuverability in waves at the design stage is an important way to ensure that the ship navigates safely. This paper focuses on the maneuvering prediction of a Russian trawler in wind and irregular waves. First, a unified seakeeping and maneuvering analysis of a Russian trawler is proposed. The hydrodynamic forces acting on the hull in calm water were estimated using empirical formulas based on a database containing information on several fishing vessels. A simulation of the standard maneuvering of the Russian trawler was conducted in calm water, which was checked using the International Maritime Organization (IMO) standards for ship maneuvering. Second, a unified model of seakeeping and maneuvering that considers the effect of wind and waves is proposed. The wave forces were estimated by a three-dimensional (3D) panel program (ANSYS-AQWA) and used as a database when simulating the ship maneuvering in wind and irregular waves. The wind forces and moments acting on the Russian trawler are estimated using empirical formulas based on a database of wind-tunnel test results. Third, standard maneuvering of a Russian trawler was conducted in various directions under wind and irregular wave conditions. Finally, the influence of wind and wave directions on the drifting distance and drifting angle of the ship as it turns in a circle was found. North wind has a dominant influence on the turning trajectory of the trawler.

• Journal of Regulation Studies
• /
• v.27 no.2
• /
• pp.71-104
• /
• 2018

Regulatory agencies' response to resource constraints is an important issue in terms of regulatory effectiveness, but systematic research is lacking. As an effort to overcome this limitation, this study was to explore behaviors of regulatory agencies in response to resource constraints. Reviewing the precedent studies based on regulatory and organizational theories, the study suggested the potential behaviors of regulatory agencies under resource constraints: changes in regulatory processes, changes in enforcement methods, decoupling, and regulatory delegation and contracting-out. The study also discussed the realistic explanations of the response behaviors partly through the case of marine transportation regulation, and explained the problems that the regulatory agency's behaviors could bring about. Based on the findings, the study suggested that the regulatory framework should be designed to ensure the effectiveness of the regulatory system in consideration of the regulatory agencies' behaviors under resource constraints. The study is expected to contribute to developing a theoretical analysis framework ultimately for an empirical study in the future.

• Advances in nano research
• /
• v.13 no.1
• /
• pp.97-111
• /
• 2022

In the present article, silica nanoparticles (SNPs) were exploited to improve the tribological and mechanical properties of vinyl ester/glass fiber composites. To the best of our knowledge, there hasn't been any prior study on the wear properties of glass fiber reinforced vinyl ester SiO₂ nanocomposites. The wear resistance is a critical concern in many industries which needs to be managed effectively to reduce high costs. To examine the influence of SNPs on the mechanical properties, seven different weight percentages of vinyl ester/nano-silica composites were initially fabricated. Afterward, based on the tensile testing results of the silica nanocomposites, four wt% of SNPs were selected to fabricate a ternary composite composed of vinyl ester/glass fiber/nano-silica using vacuum-assisted resin transfer molding. At the next stage, the tensile, three-point flexural, Charpy impact, and pin-on-disk wear tests were performed on the ternary composites. The fractured surfaces were analyzed by scanning electron microscopy (SEM) images after conducting previous tests. The most important and interesting result of this study was the development of a nanocomposite that exhibited a 52.2% decrease in the mean coefficient of friction (COF) by augmenting the SNPs, which is beneficial for the fabrication/repair of composite/steel energy pipelines as well as hydraulic and pneumatic pipe systems conveying abrasive materials. Moreover, the weight loss due to wearing the ternary composite containing one wt% of SNPs was significantly reduced by 70%. Such enhanced property of the fabricated nanocomposite may also be an important design factor for marine structures, bridges, and transportation of wind turbine blades.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.3
• /
• pp.153-160
• /
• 2022

Moored floating platforms have great potential in ocean engineering applications because a mooring system is necessary to keep the platform in station, which is directly related to the operational efficiency and safety of the platform. This paper briefly introduces the technical and operational details of an optical sensor for measuring the tension of mooring lines of a moored platform in waves. In order to check the performance of optical sensors, an experiment with a moored floating platform in waves is carried out in the wave tank at Changwon National University. The experiment is performed in regular waves and irregular waves with a semi-submersible and triangle platform. The performance of the optical sensor is confirmed by comparing the results of the tension of the mooring lines by the optical sensor and tension gauges. The maximum tension of the mooring lines is estimated to investigate the mooring dynamics due to the effect of the wave direction and wavelength in the regular waves. The significant value of the tension of mooring lines in various wave directions is estimated in the case of irregular waves. The results show that the optical sensor is effective in measuring the tension of the mooring lines.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.2_2
• /
• pp.341-347
• /
• 2023

The subway is one of the most common and important means of transportation in modern society. In order to use the subway safely, tracks are necessary, but trains are prone to derailment and collisions. In order for the train to run safely on the track, the fishplate that connects the line connection is used. The damaged railway was a fishplate for connecting subway lines used for 11 years, and damage analysis and countermeasures were presented. Beach marks were observed on both fracture surfaces, and striations appeared at the range of crack propagation. The damaged part is Cr carbide, which has a higher hardness than the base metal, and is judged to be embrittled and destroyed by fatigue. The SM50C fishplate was subjected to a cyclic stress of about 59% of the upper limit of tensile-compression fatigue limit, but inclusions were the cause of failure. In order to prevent fatigue failure of the SM50C steel fishplate, the occurrence of inclusions should be minimized and processed to have a homogeneous structure when manufacturing the fishplate. In addition, compressive residual stress is given through surface modification such as peening to control crack generation. It is necessary to minimize the change in shape that can become a stress concentration part along with accurate fastening of the bolt, and to design the stress distribution to be as uniform as possible.