• 한국수산과학회지
• /
• 제41권2호
• /
• pp.140-149
• /
• 2008

This study evaluated the efficiency of an oil fence and spreading devices for one vessel in a towing tank. A series of model experiments and numerical calculations were conducted using an existing oil fence for two vessels and a new method for one vessel. Models of the oil fence and spreading devices were constructed on $1/20^{th}$ scale from waterproofed nylon fabric and canvas. The tensions acting on the model of the oil fences and the horizontal distance between the spreading devices were calculated numerically while the oil fences were being towed. The results were extremely close to the results of the model experiments. The ratio of the opening width to the total length of the oil fence, which shows the efficiency of the oil fence for one vessel, was 49.7% in 0.4 m/sec. Therefore, the proposed oil fence system should be very useful for oil containment at sea. As the opening width of the oil fence is not proportional to the length of the towing rope, it may be reasonable to maintain the towing rope at approximately 100 m. Furthermore, a reasonable towing speed, when operating the oil fence for one vessel equipped with spreading devices, was within 0.4 m/sec.

• 한국항해항만학회지
• /
• 제27권2호
• /
• pp.129-135
• /
• 2003

이 연구는 우리나라 및 영국ㆍ미국ㆍ일본ㆍ네델란드의 해양사고에 관한 조사ㆍ심판제도를 다루며, 우리나라의 조사ㆍ심판제도를 주요 해운국가의 제도와 비교ㆍ분석하여 우리 제도의 미비점을 도출하고 다음과 같은 개선방안을 제안한다. (1) 해양안전심판원의 소속, 예산, 인사 및 청사를 독립시켜 단독기관으로 한다. (2) 해양안전심판원의 조사기능과 심판기능을 독립된 조사기관으로 이원화한다. (3) 사고원인을 규명한 결과를 행정기관 등에 권고를 할 수 있는 권한을 가지도록 한다. (4) 조사관 및 심판관을 다양한 전공의 전문가로 구성한다. (5) 조사시 사법기관과의 상호 협력체제를 구축한다. (6) 국제협력업무를 담당하는 전문부서와 인력을 갖춘다.

• 동력기계공학회지
• /
• 제19권1호
• /
• pp.38-44
• /
• 2015

Various finite elements have been studied and developed to analyze a variety of structures in the finite element method(FEM). The transfer stiffness coefficient method(TSCM) is an effective algorithm for structural analysis but the structures which can be applied were limited. In this paper, a computational algorithm for the structural analysis of axisymmetric conical shells under axisymmetric loading is formulated using the finite element-transfer stiffness coefficient method(FE-TSCM). The basic concept of FE-TSCM is the combination of the modeling technique of FEM and the transfer technique of TSCM. The FE-TSCM has all the advantages of both FEM and TSCM. After carrying out the structural analysis of axisymmetric conical shells using FEM, FE-TSCM, and analytical method we compare the computational results of FE-TSCM with those of the other methods in terms of computational accuracy.

• 해양환경안전학회지
• /
• 제15권1호
• /
• pp.41-48
• /
• 2009

중 소형 어항에서 한정된 해양경찰자원으로 수요자 중심의 고품질 해양경찰 서비스를 제공할 수 있는 현장 서비스 표준 모델 개발을 목적으로 어업관련 업무를 영역별로 분석하고 어업종사자의 친숙도를 조사하였다. 또한 표본항으로 녹동항을 선정하여 해양경찰 파출소에 대한 치안수요와 업무량을 정량적으로 분석하고 업무성취도를 도출하였다. 시사점과 분석결과를 바탕으로 어항 현장 업무 표준 모형을 구성하고 역할중심 조직인 해양경찰대 조직구성과 업무 수요량 기반 자원방안을 제안하였다. 또한 수요자의 만족도 제고와 업무성취도 향상을 위한 교육프로그램을 제시하였다.

• 수산해양교육연구
• /
• 제22권3호
• /
• pp.303-315
• /
• 2010

The fisheries resource in waters under the jurisdiction of Korea is being endangered by unlawful fishery. The Korean government exerted great efforts to establish the public order of water, but the number of the exposed unlawful fishing violations has increased for last 10 years. The system to guide fisheries regulatory noncompliance of Korea is limited to the use of fishing guidance patrol boats. For strength of monitoring and surveillance systems, the government needs to phase in Vessel Monitoring System. But there are some studies for that. The defects of present monitoring practice can be drawn from the facts described above. The qualification of the fishery control official one of most important element of fishing control system, is defined as any officer who is charging on fishing. For clear law enforcement the qualification should require considerable experience and knowledge. Korean coast guards have problems on guiding unlawful fishing violations because of the absence of administrative authority by comparison with the fisheries guiding officer, who has both authorities on administration and jurisdiction. To draw some judicial problems this research presents a analysis on the fishing control system. The research suggests the improvements to compensate the defects.

• 동력기계공학회지
• /
• 제19권6호
• /
• pp.60-67
• /
• 2015

While designing and operating machines, it is very important to understand the dynamic characteristic of the machines. Authors developed the Sylvester-transfer stiffness coefficient method in order to analyze effectively the free vibration of machines or structures. The Sylvester-transfer stiffness coefficient method was derived from the combination of the Sylvester's inertia theorem and the transfer stiffness coefficient method. In this paper, the authors formulate the computational algorithm for flexural free vibration analysis of axisymmetric annular plate using the Sylvester-transfer stiffness coefficient method. To confirm the usefulness of the Sylvester-transfer stiffness coefficient method, the natural frequencies and modes for two computational models computed using the Sylvester-transfer stiffness coefficient method are compared with those computed using the exact solution and the finite element method.

• 수산해양기술연구
• /
• 제52권3호
• /
• pp.263-270
• /
• 2016

This study is aimed to design the mechanical gascyclone precipitator with an outstanding collection efficiency as one of ways to reduce exhaust gas of small-scale vessels. It estimated fine particles generated from diesel engines which has become one of the biggest environmental issues currently. Specifically, it quantitatively analyzed the flowing process from the cyclone gas exit; a duct via part to the collecting part of Cylindrical lower using DPIV (Digital Particle Image Velocimetry). Since the gas inlet height part became wider the previous theoretical dimensions, internal fluid characteristics of cyclone where the speed of internal swirl had been slow were investigated by temporary streamline of fine particles at $14-20{\mu}m$. The results showed that collecting efficiency was three times higher than the conical type utilized previously. In addition, this study supplemented imprecision problems from the previous theoretical equation and CFD interpretation with an experimental method. It also provided a basic data to design the cyclone precipitator by size of diesel engines for vessels.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.437-445
• /
• 2017

Distribution and composition of the seabed litters in the exclusive economic zone of the West Sea of South Korea including 18 sea-blocks were investigated using a bottom trawl gear of the R/V Tamgtu 20 (National Institute of Fisheries Science) from 24th April 2011 to 4th May 2012. Each trawl shot was conducted for an hour in each sea-block and the total trawl shots was 18. As a result, 325.6 kg of seabed litter in total has been collected. The quantity of the seabed litter was highest at No. 202 of the sea-block, close to the Heuksan-Do. The highest occupied sea material was plastic (83.1% of entire seabed litters), the second highest material was metal combined with plastic (10.6%), and glass (2.9%), metals (2.3%), vinyl (0.6%), cloth (0.4%) and wood (0.2%) in order. The origin of seabed litters was from fishing gear (89.0% of all seabed litters). Therefore, it could be assumed that most seabed litters were derived from the fishing activity for example fishing nets and ropes.

• 해양환경안전학회지
• /
• 제10권1호
• /
• pp.55-59
• /
• 2004

1995년도 1996년 6월에 실시된 CREAMS 항해 관측 자료를 이용하여 Wasaka bay 연안역의 수온역전 현상을 조사하였다. 수온역전현상은 대부분 20m 이천의 상층부에 위치하였으며, 특히 쓰시마난류와 연안수와의 경계역 부분에 형성되었다. 쓰시마난류는 고온${\cdot}$고염분수의 특징을 가지며, 이러한 고수온은 경계역 부분에서 수온역전 현상을 초래하여 밀도 역전현상을 일으키는 작용을 하는 반면, 고염분은 밀도를 증가시켜 주는 작용을 하여 수온역전에 따른 밀도역전현상을 막아주는 역할을 한다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2008년도 춘계학술발표회
• /
• pp.249-255
• /
• 2008

2007년 12월 7일 태안앞바다에서 발생한 Hebei Spirit호와 크레인바지선 삼성 1호의 충돌사고로 인한 대형오염사고의 발생단계에서 대응하는 전 과정을 통해 많은 문제점이 지적되었다. 이에 따라 저자는 이번 오염사고를 오염방지 측면에서 그 원인을 집중적으로 분석하여 개선책, 즉 예인선의 예인시의 출항통제 및 항해검사 기준 강화, VTS 서비스 확충 및 관리책임부서를 해양경찰청으로의 이관, 적합한 정박지 지정 및 선종별, 화물별, 목적별로 분리하여 정박지 관리, 위험물운반선의 특별관리시스템 도입 등을 제시함으로써 추후 오염사고의 방지에 도움을 주고자 하였다.