• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.515-517
• /
• 2013

We carried out the maritime safety audit for Sandal Water Bridge constructed between Geje-Do and Sandal-Do in 2015. To study as to whether can be secured the marine traffic safety for this area, this research investigated and performed the marine accident, marine traffic volume, the marine traffic flow simulation and shiphandling simulation. It is considered to be required the quantitative guidelines for maritime safety audit including audit target area and formal audit object etc.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.321-326
• /
• 2008

Recently the large sea bridge's construction crossing harbor and main ship's route have been propelled in the domestic so that it is active for the smoothly traffic flow of inland transportation and road user's convenience. However, it can bring about the trouble to ensure marine traffic safety if it is built that sea bridge's construction sets to an economy principle in the extension of the land road system. We're adopting Ship Handling Simulation in representative method for the influence assessment of marine traffic safety and danger elements beforehand. This research attempts to show the problems through the comparison and analysis of the reports relating to the sea bridge construction for 4 organization possessing Ship Handling Simulation. Finally, We offer the necessity of standardization on performing and assessment method of simulations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.119-125
• /
• 2009

Recently the construction of bridges crossing navigable waterways is being promoted aiming at expanding social infrastructure and optimizing the overland routes through private investment. The construction, however, tends to focus on more the commercial requirements than the marine safety and efficient port management that it has a big risk not only to fail in ensuring the safety of ship traffic, but also to muse some severe conflicts between the parties concerned. These problems result from the lacking of standards about the design guidelines and discussing process considering the marine traffic safety when designing bridges. This research attempts to show the problems mused by bridge construction and suggest the standard discussing process through the survey and process analysis on Kwangyang Bridge and Incheon Bridge.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.743-750
• /
• 2008

Recently Bridges crossing waterway are constructed in navigable waterway, so marine accidents near bridges navigable waterway often occurred bemuse that has affect dangerous element for. This paper analysed the necessary environmental factors to navigate safely near bridges and how to set up the environmental factors. Marine accidents elements occurred near bridges relate to span of bridge, size of navigating ship, length of straight way and traffic volume except mistake of mariners. As results of marine accident parameter analysis, Span of bridge is necessary more than 300m at least based on marine accident's analysis, and in case of more than ship's Length 150m, span of bridge is necessary more than 500m, $3{\sim}4L$(L; Ship's Length). Length of straight way before bridge is necessary more than 8L to minimize the marine accident.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2002

A correctly designed bridge offers improved operational safety in terms of increased vigilance, flexibility of operation, precision of control and operator＇s situational awareness. According1y to design human centered bridge, the consideration shall be given to the man-machine interface, location and interrelation of workstation, configuration of console, windows. field of vision and bridge working environment. The state-of-the-art suits for one-man operation by integration of conning information and central information presentation. Further, it is desirable to enable two man ship operation for emergency operations, training purposes and redundancy. In this point of view, this thesis would like to design a conceptual bridge.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.161-167
• /
• 2007

There were no related papers to study about that training ship's bridge was designed for safety navigation and efficient navigation training. Therefore, at first, on this paper, we grouped domestic training ship's bridge layouts into three classes like as "the front and the rear-type bridge layout", "the twin deck-type bridge layout", and "the single-type bridge layout" by mutually layout type between main bridge and training bridge. Furthermore, we investigated working type of navigation training on each bridge layouts through the questionnaire, and extracted merits and demerits for each bridge layouts to be going on operation and training at the same time. At last, we presented new type training ship's bridge model to improve demerits and to elevate merits above mentioned.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.169-175
• /
• 2008

Usually, domestic training ship's bridge was designed for safe navigation and efficient navigation training. In this paper, we grouped domestic training ship's bridge layouts into three classes such as "the front and the rear-type bridge layout", "the twin deck-type bridge layout", and "the single-type bridge layout" by layout type between main bridge and training bridge. Furthermore, we investigated how to operate navigation training according to the type of bridge layout through the questionnaire, and extracted merits and demerits of each bridge layout in combination of normal operation with navigation training at the same time. We presented new type of training ship's bridge model to improve demerits and to elevate merits.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.2
• /
• pp.31-37
• /
• 2003

In these days, several bridges have been built or under construction over navigational channel in Korea. In these cases there must be careful consideration for the marine safety of vessels to be passed by below the bridge. This paper aims to analyze the factors influencing maritime traffic safety and to figure out ample width of main span of these kinds of bridges through the reference study and FMSS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.1
• /
• pp.1-8
• /
• 1999

During the last 10 years, the various type of high speed craft have been greatly developed, and since around of 1990 the large size of high speed passenger and/or cargo vessels are also introduced and took into the service in the various routes over the world. In a marine traffic way some bridge need to build across a rivers, cannals or a waterways. This one will be an obstruction and potential risk of collision in the way of high speed craft. Accordingly some of collision accident have been reported, which were caused by a lost control, wind and hydrodynamic forces, fog or human errors. In this paper a high speed craft having 40 m length is assumed to be collided with a circular type of bridge piers at right angle. The mode of deformation, penetration depth of collapse, impact forces, reduction of speed, loss of kinetic energy, and influence of scantlings, etc. have been calculated in each speed with a time variation to find a maximum values within a limit, and are graphically presented.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.3
• /
• pp.724-732
• /
• 2013

The purpose of this study is to obtain a basic data on layout of the trawlers' bridge equipment. The task activities of bridge workers involved in the navigation and fishing operation were analyzed by link analysis methods. The results are as follows. It was found that the movement pattern and frequency of bridge workers are different accordance with the bridge work (navigation, casting net, towing net and hauling net). The central workstation of movement of the bridge workers was a radar workstation, a steering workstation and a trawl winch workstation in the bridge work. But the radar did not show up as the center of movement during the hauling net. Workstations related deeply to the central workstations of the movement on the bridge were as below. Radar workstation was related to a GPS plotter, a microphone location for external communication with VHF and MF/HF equipment and a steering in the case of the navigation, the steering, the GPS plotter and the net monitor in the case of the fishing operation. Steering workstation was related deeply to the GPS plotter, the radar in the case of the navigation, a speed controller, the GPS plotter, a fish finder, the net monitor and the microphone location in the case of the fishing operation. Trawl winch workstation showed deep relation with the GPS plotter and the speed control during the fishing operation. Through this study, it was found that Workstations related deeply to the central workstation of the movement of the bridge workers in accordance with the bridge work. The results of this study might be utilized as the basic data on the bridge layout to minimize the fatigue degree due to a physical movement of the bridge workers.