• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.107-119
• /
• 1990

The purpose of this study was to evaluate the marginal adaptability of the amalgam restorations in applying the cavity varnish (Copalite$^{(R)}$) and dentin bonding agent (Scotchbond 2$^{(R)}$) under the scanning electron microscope. For this study, eighteen sound extracted human molars were selected. Class I cavities in 12 teeth and class V cavities in 6 teeth were prepared using an air turbine with No. 701 tungsten carbide bur and finished using a low speed handpiece with No. 557 fissure bur. The prepared specimens were then divided into three groups including 4 class I cavities and 2 class V cavities in each group and restored as follows ; Group I. All the prepared cavities were restored with amalgam only (Control). Group II. Two layers of Copalite$^{(R)}$ cavity varnish were applied to the cavities with a gentle stream of air after each application and cavities were restored with amalgam. Group III. The enamel cavity margins were etched with 37% phosphoric acid gel for 60 sec., rinsed for 30 sec. and dried. One layer of visible lightcured Scotchbond Dental Adhesive$^{(R)}$ was applied and immediately cured for 20 seconds with visible light-cure unit and cavities were restored with amalgam. All the specimens were cut at the neck of the teeth and the occlusal halves of specimens were sectioned buccolingually in the longitudinal axis centering the amalgam restorations, using the disk. The cut specimens were ground with sandpapers (400, 600, 800, 1000 grit), and cleaned for 5 minutes in the ultrasonic cleaner (Brason Co. U.S.A.). In the cut surfaces, the amalgam - tooth interfaces were examined under the scanning electron microscope (JSM, 35C type, JEOL). The obtained results were as follows ; 1. The amalgam-tooth interfaces were reduced more significantly in the Copalite$^{(R)}$ and Scotchbond 2$^{(R)}$ application group than in the control group. 2. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed the findings similar to the Copalite$^{(R)}$ application group in the cavity floor, and the marginal adaptability was better in the side wall than in the cavity floor. 3. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed better marginal adaptability in the occlusal margin than in the gingival margin. 4. The marginal adaptability was in the order of the Scothbond 2$^{(R)}$ application group, the Copalite$^{(R)}$ application group and the control group.

• Restorative Dentistry and Endodontics
• /
• 제29권5호
• /
• pp.413-422
• /
• 2004

Established microleakage tests have their own disadvantages. In this study, 3D reconstruction method was tried to overcome these disadvantages. Four types of microleakage tests were used and relationships among them were estimated: penetrated dye volume: marginal adaptability: degree of dye penetration and relative penetrated length to cavity wall. Twenty-four Class V cavities were bulk filled with composite (Esthet X) following surface treatments: N group (no treatment): E group (etching only): T group (etching + Prime & Bond NT). 50% silver nitrate was used as a dye solution after thermocycling ($5^{\circ}C{\;}&{\;}55^{\circ}C$, 1.000 times). Teeth were serially ground with a thickness of 0.2 mm. Volume of dye penetration was estimated from a three-dimensionally reconstructed image with a software (3D-DOCTOR). Percentage of margin without gap was estimated from SEM and degree of dye penetration and the relative length of dye penetration to overall cavity wall were also estimated. ANOVA and Scheffe test for dye volume, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman's rho test for checking of relationships among methods were used. The results were as follows: 1. Dye penetration could be seen from several directions, furthermore, its volumetric estimation was possible. 2. Reverse relationship was found between dye volume and marginal quality (r = -0.881/ p = 0.004). 3. Very low relationship was seen between dye volume and two-dimensional tests (degree of dye penetration and relative length). However, 2D evaluation methods showed high relationship (p = 0.002-0.054) each other. 4. Three times vertical section could be recommended as a 2D test.

• Journal of Plant Biotechnology
• /
• 제36권3호
• /
• pp.197-201
• /
• 2009

The food self-support rate on the basis of cereals in Korea is approximately 27%, which will threaten the national food security. The dramatic increase in population accompanied by rapid industrialization in developing countries has caused imbalances in the supply of food and energy. To cope with these global crises over food and energy supplies as well as environmental problems, it is urgently required to develop new environmentally friendly industrial crop varieties to be grown on marginal lands including desertification areas for sustainable development. Sweetpotato (Ipomoea batatas (L.) Lam.) ranks seventh in annual production among food crops in the world. Its wide adaptability on marginal lands and rich nutritional content provide a high potential for preventing malnutrition and enhancing food security in the developing countries. In addition, sweetpotato can be developed as a bioreactor to produce valuable industrial materials including bio-ethanol, functional feed and antioxidants by molecular breeding. In this respect, we focus on the molecular breeding of sweetpotato with multi-function on marginal lands. The strategies for development of environmentally friendly industrial sweetpotato will be introduced and discussed.

• Journal of Dairy Science and Biotechnology
• /
• 제33권1호
• /
• pp.69-73
• /
• 2015

The world is presently facing key challenges due to the population explosion, shortages in renewable sources of energy, and environmental problems. One important aspect of ecological intensification is the use and improvement of marginal lands and spaces often ignored, until now. Goats are known to be well adapted to scrubs, forage trees, and rangelands. Goats could contribute marginally, but significantly, to the growing demand for meat without using arable lands. Since 2000, there were 752 million goats globally, and goat livestock increased by 26.8% in 2010, accounting for 954 million heads. Goats are widespread due to their high adaptability to different environmental conditions and nutritional regimes, high productivity, and low maintenance cost. A significant growth in goat number was noticed in the period 2000~2010 in the Netherlands (+113.83%), in spite of the 9.75% decrease in EU-27. A cheese making goat farm in the Netherlands showed how it can survive in the one fifth size of the average. It may be a good model for the Korean goat industry since it uses seasonal breeding and results in reduced "goaty" flavor in the cheese.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.438-440
• /
• 2003

This paper resents an application of an Artificial Neural Network(ANN) technique to forecast the short-term system marginal price(SMP). The forecasting of SMP is a very important factor in an electricity market for the optimal biddings of market participants as well as for the market stabilization of regulatory bodies. The proposed neural network scheme is composed of three layers. In this process, input data are set up to reflect market conditions. And the $\lambda$ that is the coefficient of activation function is modified in order to give a proper signal to each neuron and improve the adaptability for a neural network. The reposed techniques are trained validated and tested with the historical real-world data from korea Power Exchange(KPX).

• Journal of Plant Biotechnology
• /
• 제36권3호
• /
• pp.219-223
• /
• 2009

Oxidative stress derived from excess reactive oxygen species (ROS) is a major damaging factor for plants exposed to environmental stresses. Sweetpotato [Ipomoea batatas (L.) Lam] has a relatively broad adaptability to harsh environmental conditions compared to other staple crops. In this study, to select stress-tolerant sweetpotato cultivars for sources of molecular breeding on marginal lands, we evaluated the ion leakage values in 10 different cultivars after treatment of methyl viologen (MV), an ROS-generating nonselective herbicide, to leaf discs. DPPH radical scavenging activity and the contents of total phenolics were also investigated. The ion leakage of each cultivar showed a diverse value, which is well correlated with DPPH radical scavenging activity of each cultivar. DPPH radical scavenging activity also showed a high corelation with the contents of total phenolic contents. Three cultivars of Yanshu 8, Shinhwangmi and Shinzami showed high antioxidant activity. Our results suggest that a simple and efficient DPPH radical scavenging activity would be a suitable method to select potential cultivars with enhanced tolerance to multiple environmental stress.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.121-128
• /
• 2020

Purpose: This study aimed to investigate the effects of the sintering conditions of zirconia core on the adaptability. Methods: Ten specimens of each of commercial brand of zirconia(Razor 1100, U&C international, Seoul, Korea) were made and sintered under three different conditions. Specimens were divided into three subgroup(n=10) and sintered with various total time(1hr, 3hr, 9hr) at the maximum temperature(1500℃). The digitized data was superimposed with 3D inspection software to quantitatively obtain the adaptation of a zirconia core, and visual differences were confirmed with a color map. The root mean square(RMS) values of group were statistically analyzed with one-way ANOVA(α=0.05). Results: The overall adaptation of the zirconia cores were as follows; ss-1hr: 36.18±5.2㎛, ss-3hr: 39.55±3.9㎛, cs-9hr: 46.62±4.3㎛. They were statistically significant differences between groups for adaptation(p<0.05). Conclusion: Based on the results of this study, it could be considered that sintering condition of 1500℃ and 1~3 hour is recommended for the better marginal and internal fit. Speed sintering can be widely utilized to fabricate zirconia prothesis as the properties of those almost are to dentistry uses.

• 한국작물학회지
• /
• 제66권3호
• /
• pp.210-219
• /
• 2021

최근 지구온난화에 의해 기온이 상승하여 조생종을 주로 재배하는 중북부중산간지대에 중생종과 중만생종의 적응성을 검토하기 위해서 출수생태형별로 이앙시기를 달리해서 조생종 오대, 중생종 청품, 중만생종 삼광을 제천의 농가포장에서 시험한 결과는 다음과 같다. 1. 벼 생육에 영향을 미치는 기상요소 중 평균기온은 2010년대에 8월까지는 가장 높았고, 다른 시기보다 월별로 0.7~0.9℃가 높았으며, 일조시간은 장마, 태풍 등으로 인한 기상이변으로 가장 낮은 수준이었다. 2. 지난 35년간 오대의 지역적응시험 결과 출수기는 점점 빨라지고 있으며, 이앙부터 출수기까지 재배일수가 짧아져 간장과 수수가 감소되었다. 과거보다 등숙률은 최대 10%, 천립중은 2 g 이상 증가되었으나, 품질과 직결되는 출수 후 40일간 평균기온은 많게는 2℃ 이상 증가되었다. 3. 제천지역 안전출수한계기는 출수 후 40일간 적산온도 880℃ 기준으로는 8월 11일, 840℃ 기준으로는 8월 15일로 분석되었다. 4. 이앙시기별 출수생태형에 따라 생육은 비슷하였으나 이앙시기별 최고, 최저 수준을 비교한 등숙률은 조생종 6.5%, 중생종 3.7%, 중만생종 2.5% 높았다. 쌀수량은 조생종 83 kg, 중생종 113 kg, 중만생종 47 kg 많았으며, 완전미율은 조생종 17.8%, 중생종 3.2%, 중만생종 5.0% 높았다. 5. 중북부중산간지에서 안전출수한계기 및 완전미수량을 고려한 이앙시기는 조생종은 6월 15일, 중생종은 6월 5일, 중만생종은 5월 25일이었으며, 본 시험 지역(IV-1)에서도 온난화로 인해 중생종과 중만생종이 안정적으로 재배될 수 있을 것으로 예상된다.

• 대한치과보철학회지
• /
• 제48권2호
• /
• pp.143-150
• /
• 2010

연구목적: 본 연구의 목적은 냉간 정수압 성형법 (cold isostatic press forming)을 이용한 새로운 지르코니아 블록의 제조와 이를 이용한 코어와 완전 도재관의 적합도를 비교 평가하여 임상적 이용 가능성을 평가 하고자 함이다. 연구 재료 및 방법:지르코니아 분말 (KZ-3YE Type A)을 단일 압축 성형하여 블록의 형태로 제작 한 후, 냉간 정수압 성형하여 블록을 제작하고, 성형이 끝난 지르코니아 블록은 $1040^{\circ}C$의 온도에서 반 소결하였다. 대조군은 상용 제품 ($Everest^{(R)}$, KAVO, Biberach/$Ri{\beta}$.)을 이용하였다. $1450{^{\circ}C}$의 온도에서 완전 소결된 실험군 블록과 대조군 블록의 수축률을 측정하고 비교하였다. CAD/CAM을 이용하여 총 21개의 코어를 제작하고 세 그룹으로 나누었다. Group I은 대조군 블록을 이용해 7개의 코어를 제작하고, Group II는 실험군 블록을 이용해 7개의 코어를 제작하였다. Group III은 실험군 블록을 이용해 7개의 코어를 제작하고 도재 ($Cerabien^{TM}$)를 축성하여 완전 도재관을 제작하였다. 제작된 코어와 완전 도재관을 모형에 합착한 후 레진으로 매몰하여 치관 장축의 협설과 근원심 방향을 따라 절단하고 지대치와 코어 사이의 변연 간격과 내부 축면 간격 그리고 내부 교합면 간격을 SEM ($S-4700^{(R)}$)을 이용해 측정하였다. 모든 측정값은 평균과 표준편차를 계산하고, one-way ANOVA test를 시행하여 실험 결과를 분석하였고, 95%유의 수준으로 검정하였다. 결과:실험군과 대조군 블록의 수축률을 측정한 결과 실험군 블록의 수축률은 19.00%였고, 대조군 블록의 수축률은 20.09%로 실험군 블록의 수축률이 더 낮은 것으로 나타났다. 적합도 측정 결과 변연 간격의 측정값에서 Group II의값($29.67{\pm}6.58 {\mu}m$)이 Group I의값($36.84 {\pm}7.18 {\mu}m$)보다 통계적으로 유의하게 작은 것으로 나타났다. 또한 Group II와 Group III의 값 사이에서는 유의한 차이가 없었다. 내부 측면 간격의 측정값에서 Group III의값($32.23{\pm}6.33 {\mu}m$)이 Group I와 Group II의내부측면간격의값($37.57{\pm}6.81{\mu}m$, $38.14{\pm}6.81{\mu}m$)보다 큰 것으로 나타났다. 각 부위의 간격 측정결과 내부 교합면 간격의 값이 변연 간격 및 내부 축면 간격의 값보다 유의하게 큰 것으로 나타났다. 결론: 현재 상용중인 대조군 블록과 비교하여 냉간 정수압 성형법으로 제조된 실험군 블록의 적합도는 유의한 차이를 보이지 않았다. 변연 적합도는 실험군에서 더 우수하였으며 도재를 축성한 완전 도재관의 적합성이 약간 더 향상되는 경향을 보였다. 변연 적합도는 대조군과 실험군 모두에서 임상적으로 허용되는 양호한 수치를 보였다.

• 융합보안논문지
• /
• 제12권2호
• /
• pp.87-98
• /
• 2012

전국 대학교에서 경호 관련학과가 설립되어 다양한 학과 명칭과 교육과목을 설정하여 학생들을 경호 경비업체에서 필요로 하는 인재로 양성시키기 위해 노력하였다. 그러나 각 대학교 경호 관련학과의 교육은 민간경호 관련업무와 현실성 및 전문성이 떨어지는 교육과정 설정으로 인해 학생들이 졸업 후 경호 관련 직종에 취업을 하기에는 어려운 문제로 도출되고 있으며, 취업을 하더라도 뛰어난 적응력을 발휘 할 수 없는 실정이다. 따라서 개선방향으로는 각 대학교 경호 관련 학과에서 경쟁력 있는 민간경호 경비 관련업체들과의 산학협력을 통해 현장중심의 업무교육을 강화하고, 현실에 맞는 맞춤식 교육을 진행하며, 관련 업종 취업률을 높여야한다. 또한 경호 관련학과의 교육과정 확립을 통해 민간 경호 경비 발전은 물론 사회의 전문 직종으로서 자리 잡을 수 있도록 노력해야한다면, 관련 업종 종사자들의 위상은 높아지고, 이직률은 낮아질 것으로 사료된다. 민간경호 관련 교육단체들은 공신력 제고와 노력의 부족, 시스템 결여와 시스템적 사고의 부족, 경비업체의 연계 및 협조 부족, 자격의 편증, 직업교육 훈련 기관과 연계부족의 문제 등이 도출되었다. 개선방향으로는 국가인정을 받도록 꾸준한 노력과 체계적인 시스템을 구축하고, 자격 취득자에게 취업으로 연계시키며, 자격 종류를 다양화 하는 방안을 제시한다. 또한 자격 검정 과목과의 연계성을 고려한 직업훈련기관의 설치 방안을 제시하였고, 경비업에 민간조사업무를 추가하여 제도화하는 방안을 제시하였다.