DOI QR코드

DOI QR Code

Effect of zirconia ceramic sintering condition on the precision of fit in dental restorations

지르코니아 세라믹 소결조건이 치과보철물의 적합도에 미치는 영향

  • Kim, Jae-Hong (Department of Dental Laboratory Science, College of Health Science, Catholic University of Pusan) ;
  • Kim, Ki-Baek (Department of Dental Lab Technology, Daejeon Health Institute of Technology)
  • 김재홍 (부산가톨릭대학교 보건과학대학 치기공학과) ;
  • 김기백 (대전보건대학교 치기공(학)과)
  • Received : 2020.04.29
  • Accepted : 2020.06.02
  • Published : 2020.06.30

Abstract

Purpose: This study aimed to investigate the effects of the sintering conditions of zirconia core on the adaptability. Methods: Ten specimens of each of commercial brand of zirconia(Razor 1100, U&C international, Seoul, Korea) were made and sintered under three different conditions. Specimens were divided into three subgroup(n=10) and sintered with various total time(1hr, 3hr, 9hr) at the maximum temperature(1500℃). The digitized data was superimposed with 3D inspection software to quantitatively obtain the adaptation of a zirconia core, and visual differences were confirmed with a color map. The root mean square(RMS) values of group were statistically analyzed with one-way ANOVA(α=0.05). Results: The overall adaptation of the zirconia cores were as follows; ss-1hr: 36.18±5.2㎛, ss-3hr: 39.55±3.9㎛, cs-9hr: 46.62±4.3㎛. They were statistically significant differences between groups for adaptation(p<0.05). Conclusion: Based on the results of this study, it could be considered that sintering condition of 1500℃ and 1~3 hour is recommended for the better marginal and internal fit. Speed sintering can be widely utilized to fabricate zirconia prothesis as the properties of those almost are to dentistry uses.

Keywords

References

  1. Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater, 24(3), 299-307, 2008. https://doi.org/10.1016/j.dental.2007.05.007
  2. Ebeid K, Wille S, Hamdy A, Salah T, El-Etreby A, Kern M. Effect of changes in sintering parameters on monolithic translucent zirconia. Dent Mater, 30(12), e419-e424, 2014. https://doi.org/10.1016/j.dental.2014.09.003
  3. Hjerppe J, Vallittu PK, Froberg K, Lassila LV. Effect of sintering time on biaxial strength of zirconium dioxide. Dent Mater, 25(2), 166-171, 2009. https://doi.org/10.1016/j.dental.2008.05.011
  4. ISO-12836: 2012. Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy. Geneva: International Organization for Standardization. Accessed December 22, 2015.
  5. Jansen JU, Lumkemann N, Letz I, Pfefferle R, Sener B, Stawarczyk B. Impact of highspeed sintering on translucency, phase content, grain sizes, and flexural strength of 3Y-TZP and 4Y-TZP zirconia materials. J Prosthet Dent, 122(4), 396-403, 2019. https://doi.org/10.1016/j.prosdent.2019.02.005
  6. Jiang L, Liao Y, Li W. Effect of sintering temperature and particle size on the translucency of zirconium dioxide dental ceramic. J Mater Sci Mater Med, 22(11), 2429-2435, 2011. https://doi.org/10.1007/s10856-011-4438-9
  7. Jung HK, Kwak DJ. The study of flexural strength of full zirconia crown using block after clinical work. J Kor Aca Dent Tec, 33(4), 283-289, 2011.
  8. Kim KB, Kim JH, Lee KW. The influence of microwave sintering process on the adaptation of CAD/CAM zirconia core. J Dent Rehabil Appl Sci, 25(2), 95-107, 2009.
  9. Kim MJ, Ahn JS, Kim JH, Kim HY, Kim WC. Effects of the sintering conditions of dental zirconia ceramics on the grain size and translucency. J Adv Prosthodont, 5(2), 161-166, 2013. https://doi.org/10.4047/jap.2013.5.2.161
  10. Lawson S. Environmental degradation of zirconia ceramics. J Eur Ceram Soc, 15(6), 485-502, 1995. https://doi.org/10.1016/0955-2219(95)00035-S
  11. Marinis A, Aquilino SA, Lund PS, Gratton DG, Stanford CM, Diaz-Arnold AM, Qian F. Fracture toughness of yttria-stabilized zirconia sintered in conventional and microwave ovens. J Prosthet Dent, 109(3), 165-171, 2013. https://doi.org/10.1016/S0022-3913(13)60037-2
  12. Manicone PF, Iommetti PR, Raffaelli L. An overview of zirconia ceramics: Basic properties and clinical applications. J Dent, 35(11), 819-826, 2007. https://doi.org/10.1016/j.jdent.2007.07.008
  13. Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J, 28(1), 44-56, 2009. https://doi.org/10.4012/dmj.28.44
  14. Raptis NV, Michalakis KX, Hirayama H. Optical behavior of current ceramic systems. Int J Periodont Rest, 26(1), 31-41, 2006.
  15. Stawarczyk B, Ozcan M, Hallmann L, Ender A, Mehl A, Hammerlet CHF. The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio. Clin Oral Invest, 17(1), 269-274, 2012. https://doi.org/10.1007/s00784-012-0692-6
  16. Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxide-partiallystabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil, 31(7), 682-688, 2004. https://doi.org/10.1111/j.1365-2842.2004.01284.x
  17. Tinschert J, Natt G, Mautsch W, Spickermann H, Anusavice KJ. Marginal fit of alumina and based fixed partial dentures produced by a CAD/CAM system. Oper Dent, 26(4), 367-374, 2001.
  18. Whalen PJ, Reidinger F, Antrim RF. Prevention of low - temperature surface transformation by surface recrystallization in yttria - doped tetragonal zirconia. J Am Ceram Soc, 72(2), 319-321, 1989. https://doi.org/10.1111/j.1151-2916.1989.tb06124.x
  19. Zarone F, Russo S, Sorrentino R. From porcelainfused-to-metal to zirconia: Clinical and experimental considerations. Dent Mater, 27(1), 83-96, 2011. https://doi.org/10.1016/j.dental.2010.10.024