• Restorative Dentistry and Endodontics
• /
• v.15 no.1
• /
• pp.107-119
• /
• 1990

The purpose of this study was to evaluate the marginal adaptability of the amalgam restorations in applying the cavity varnish (Copalite$^{(R)}$) and dentin bonding agent (Scotchbond 2$^{(R)}$) under the scanning electron microscope. For this study, eighteen sound extracted human molars were selected. Class I cavities in 12 teeth and class V cavities in 6 teeth were prepared using an air turbine with No. 701 tungsten carbide bur and finished using a low speed handpiece with No. 557 fissure bur. The prepared specimens were then divided into three groups including 4 class I cavities and 2 class V cavities in each group and restored as follows ; Group I. All the prepared cavities were restored with amalgam only (Control). Group II. Two layers of Copalite$^{(R)}$ cavity varnish were applied to the cavities with a gentle stream of air after each application and cavities were restored with amalgam. Group III. The enamel cavity margins were etched with 37% phosphoric acid gel for 60 sec., rinsed for 30 sec. and dried. One layer of visible lightcured Scotchbond Dental Adhesive$^{(R)}$ was applied and immediately cured for 20 seconds with visible light-cure unit and cavities were restored with amalgam. All the specimens were cut at the neck of the teeth and the occlusal halves of specimens were sectioned buccolingually in the longitudinal axis centering the amalgam restorations, using the disk. The cut specimens were ground with sandpapers (400, 600, 800, 1000 grit), and cleaned for 5 minutes in the ultrasonic cleaner (Brason Co. U.S.A.). In the cut surfaces, the amalgam - tooth interfaces were examined under the scanning electron microscope (JSM, 35C type, JEOL). The obtained results were as follows ; 1. The amalgam-tooth interfaces were reduced more significantly in the Copalite$^{(R)}$ and Scotchbond 2$^{(R)}$ application group than in the control group. 2. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed the findings similar to the Copalite$^{(R)}$ application group in the cavity floor, and the marginal adaptability was better in the side wall than in the cavity floor. 3. In the class I cavities, the Scotchbond 2$^{(R)}$ application group showed better marginal adaptability in the occlusal margin than in the gingival margin. 4. The marginal adaptability was in the order of the Scothbond 2$^{(R)}$ application group, the Copalite$^{(R)}$ application group and the control group.

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.413-422
• /
• 2004

Established microleakage tests have their own disadvantages. In this study, 3D reconstruction method was tried to overcome these disadvantages. Four types of microleakage tests were used and relationships among them were estimated: penetrated dye volume: marginal adaptability: degree of dye penetration and relative penetrated length to cavity wall. Twenty-four Class V cavities were bulk filled with composite (Esthet X) following surface treatments: N group (no treatment): E group (etching only): T group (etching + Prime & Bond NT). 50% silver nitrate was used as a dye solution after thermocycling ($5^{\circ}C{\;}&{\;}55^{\circ}C$, 1.000 times). Teeth were serially ground with a thickness of 0.2 mm. Volume of dye penetration was estimated from a three-dimensionally reconstructed image with a software (3D-DOCTOR). Percentage of margin without gap was estimated from SEM and degree of dye penetration and the relative length of dye penetration to overall cavity wall were also estimated. ANOVA and Scheffe test for dye volume, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman's rho test for checking of relationships among methods were used. The results were as follows: 1. Dye penetration could be seen from several directions, furthermore, its volumetric estimation was possible. 2. Reverse relationship was found between dye volume and marginal quality (r = -0.881/ p = 0.004). 3. Very low relationship was seen between dye volume and two-dimensional tests (degree of dye penetration and relative length). However, 2D evaluation methods showed high relationship (p = 0.002-0.054) each other. 4. Three times vertical section could be recommended as a 2D test.

• Journal of Plant Biotechnology
• /
• v.36 no.3
• /
• pp.197-201
• /
• 2009

The food self-support rate on the basis of cereals in Korea is approximately 27%, which will threaten the national food security. The dramatic increase in population accompanied by rapid industrialization in developing countries has caused imbalances in the supply of food and energy. To cope with these global crises over food and energy supplies as well as environmental problems, it is urgently required to develop new environmentally friendly industrial crop varieties to be grown on marginal lands including desertification areas for sustainable development. Sweetpotato (Ipomoea batatas (L.) Lam.) ranks seventh in annual production among food crops in the world. Its wide adaptability on marginal lands and rich nutritional content provide a high potential for preventing malnutrition and enhancing food security in the developing countries. In addition, sweetpotato can be developed as a bioreactor to produce valuable industrial materials including bio-ethanol, functional feed and antioxidants by molecular breeding. In this respect, we focus on the molecular breeding of sweetpotato with multi-function on marginal lands. The strategies for development of environmentally friendly industrial sweetpotato will be introduced and discussed.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.69-73
• /
• 2015

The world is presently facing key challenges due to the population explosion, shortages in renewable sources of energy, and environmental problems. One important aspect of ecological intensification is the use and improvement of marginal lands and spaces often ignored, until now. Goats are known to be well adapted to scrubs, forage trees, and rangelands. Goats could contribute marginally, but significantly, to the growing demand for meat without using arable lands. Since 2000, there were 752 million goats globally, and goat livestock increased by 26.8% in 2010, accounting for 954 million heads. Goats are widespread due to their high adaptability to different environmental conditions and nutritional regimes, high productivity, and low maintenance cost. A significant growth in goat number was noticed in the period 2000~2010 in the Netherlands (+113.83%), in spite of the 9.75% decrease in EU-27. A cheese making goat farm in the Netherlands showed how it can survive in the one fifth size of the average. It may be a good model for the Korean goat industry since it uses seasonal breeding and results in reduced "goaty" flavor in the cheese.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.438-440
• /
• 2003

This paper resents an application of an Artificial Neural Network(ANN) technique to forecast the short-term system marginal price(SMP). The forecasting of SMP is a very important factor in an electricity market for the optimal biddings of market participants as well as for the market stabilization of regulatory bodies. The proposed neural network scheme is composed of three layers. In this process, input data are set up to reflect market conditions. And the $\lambda$ that is the coefficient of activation function is modified in order to give a proper signal to each neuron and improve the adaptability for a neural network. The reposed techniques are trained validated and tested with the historical real-world data from korea Power Exchange(KPX).

• Journal of Plant Biotechnology
• /
• v.36 no.3
• /
• pp.219-223
• /
• 2009

Oxidative stress derived from excess reactive oxygen species (ROS) is a major damaging factor for plants exposed to environmental stresses. Sweetpotato [Ipomoea batatas (L.) Lam] has a relatively broad adaptability to harsh environmental conditions compared to other staple crops. In this study, to select stress-tolerant sweetpotato cultivars for sources of molecular breeding on marginal lands, we evaluated the ion leakage values in 10 different cultivars after treatment of methyl viologen (MV), an ROS-generating nonselective herbicide, to leaf discs. DPPH radical scavenging activity and the contents of total phenolics were also investigated. The ion leakage of each cultivar showed a diverse value, which is well correlated with DPPH radical scavenging activity of each cultivar. DPPH radical scavenging activity also showed a high corelation with the contents of total phenolic contents. Three cultivars of Yanshu 8, Shinhwangmi and Shinzami showed high antioxidant activity. Our results suggest that a simple and efficient DPPH radical scavenging activity would be a suitable method to select potential cultivars with enhanced tolerance to multiple environmental stress.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.121-128
• /
• 2020

Purpose: This study aimed to investigate the effects of the sintering conditions of zirconia core on the adaptability. Methods: Ten specimens of each of commercial brand of zirconia(Razor 1100, U&C international, Seoul, Korea) were made and sintered under three different conditions. Specimens were divided into three subgroup(n=10) and sintered with various total time(1hr, 3hr, 9hr) at the maximum temperature(1500℃). The digitized data was superimposed with 3D inspection software to quantitatively obtain the adaptation of a zirconia core, and visual differences were confirmed with a color map. The root mean square(RMS) values of group were statistically analyzed with one-way ANOVA(α=0.05). Results: The overall adaptation of the zirconia cores were as follows; ss-1hr: 36.18±5.2㎛, ss-3hr: 39.55±3.9㎛, cs-9hr: 46.62±4.3㎛. They were statistically significant differences between groups for adaptation(p<0.05). Conclusion: Based on the results of this study, it could be considered that sintering condition of 1500℃ and 1~3 hour is recommended for the better marginal and internal fit. Speed sintering can be widely utilized to fabricate zirconia prothesis as the properties of those almost are to dentistry uses.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.210-219
• /
• 2021

In recent years, air temperature has been increasing rapidly compared to the 1980s because of global warming. This increase in temperature reduces the yield and quality of rice; therefore, measures are needed to prevent such effects and ensure food security. The early maturing type (EMT) of rice is mainly cultivated in the central northern mid-mountainous area (CNMA). This study was conducted to shift the transplanting date of EMT and to examine the adaptability of the mid-maturing type (MMT) or mid-late maturing type (MLMT) in the Jecheon region of the CNMA to address global warming. The air temperature increased by 0.7-0.9℃ in the 2010s, compared to that in the 1980s, and was similar to other decades during the ripening period. Over the past 35 years, considering rice quality, the heading date of the Odae variety has arrived sooner by approximately 10 days, the ripened grain ratio has increased by more than 10%, and the thousand grain weight; however, the mean temperature at 40 days after heading has increased by more than 2℃. The late marginal heading date in the Jecheon region was determined as August 11 based on the accumulated temperature of 880℃ and August 15 based on 840℃ for 40 days after heading. According to different transplanting dates, milled rice yield per 10 a was the highest at 567 kg with June 10 in EMT, 595 kg with June 10 in MMT, and 572 kg with May 30 in MLMT. Considering the late marginal heading date, rice yield, and quality, the optimum transplanting date was June 15 in EMT, June 5 in MMT, and May 30 in MLMT in the Jecheon region of CNMA. Owing to global warming, MMT and MLMT are expected to be reliably cultivated in the CNMA.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.143-150
• /
• 2010

Purpose: The purpose of this study is to fabricate the new zirconia block (CNU block) and to evaluate fit of core and porcelain veneered zirconia crown. Material and methods: The experimental blocks were fabricated from the commercial ytrria-stabilized zirconia powder (KZ-3YE Type A). The powder was uniaxial pressing and the green bodies were conducted using the Cold Isostatic Pressing. The zirconia blocks were presintered at $1040^{\circ}C$ and the final sintering was performed at $1450^{\circ}C$. The Kavo Everest ZS $blank{(R)}$ (KaVo, Biberach/ $Ri{\beta}$.) was used as a control group. The linear shrinkage of CNU block and Kavo block were compared. Twenty-one cores for porcelain veneered crowns were fabricated with CAD/CAM system ($Everest{(R)}$, Biberach/ $Ri{\beta}$.). Group I; seven cores fabricated from Kavo blocks, Group II; seven cores fabricated from CNU blocks, Group III; seven cores from CNU blocks and porcelain veneering for crowns. All specimens were cemented and sectioned into two planes; diagonal and bucco-lingual. The measurement of the marginal, internal, and occlusal fit was carried out using SEM ($S-4800^{(R)}$) at $30{\times}$. The results were analyzed by one-way ANOVA test. Results: The linear shrinkage of the CNU block and the KaVo block was 19.00% and 20.09%. The marginal gap of cores ($29.67{\pm}6.58{\mu}m$) fabricated from CNU blocks showed significantly smaller than that of the cores of Kavo blocks ($36.84{\pm}7.18{\mu}m$) (P < .05). The internal gaps of the porcelain veneered crowns ($32.23{\pm}6.33{\mu}m$) were larger than those of the other two groups ($37.57{\pm}6.81{\mu}m$ and $38.14{\pm}6.81{\mu}m$). Conclusion: No statistically significant difference was found in between experimental groups and control group. The experimental groups in marginal gap showed significantly smaller than the control group.

• Convergence Security Journal
• /
• v.12 no.2
• /
• pp.87-98
• /
• 2012

The department has established a variety of studies and training courses and has tried to nurture talented people for security companies. However, the research is marginal, and each university department of security guard education, curriculum falling due after graduating students. Moreover, even if students are occupied an employment exceptional adaptability has occurred. Therefore, each university of private security department will need to collaborate with competitive private security company for reinforce and employment rate in center of experienced field. Then, the security's society will be placed in professional occupation, elevate the phase and will decrease the turnover rate. Qualification system of private security have been indicated in distrust, moreover the system have to be adjusted because not enough effort, control system, cooperation system with training center, one-sided emphasis and private inquiry by adding in private security law.