• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.50-55
• /
• 1986

Characteristics of the flow and heat transfer in a channel of 37 rods are investigated numerically. The flow is taken to be a fully developed incompressible laminar flow and it has an uniform temperature profile at the inlet and flows down through the channel of constant wall temperature. A boundary-fitted coordinate system is used for the complex geometry. Calculation is initiated by calculating the developed flow profile and then proceeds to temperature development. Through the calculation the details of the flow and temperature distribution characteristics are found, and discussion is made on the mechanism of the transport phenomena in the complex geometry in terms of wall shear stress distribution, non-dimensionalized velocity, friction factor, Nusselt number distribution, Reynolds number, and porosity. Also the effects of the eccentricity in rod configuration are analyzed and its importance is emphasized.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.45-48
• /
• 2000

본 논문은 현재 고성능 가역압축 부호화의 표준이 되는 JPEG-LS의 예측오차에 대한 확률분포를 결정하는 컨텍스트 모델링(context modelling)에서 컨텍스트 정수의 결정 방법에 관해 기술한다. 먼저, 압축률 향상을 위해 낮은 대비(low contrast)를 적용하는 전처리 과정을 도입한다. 둘째로, 낮은 복잡도(low complexity)를 위해 주목화소와 주변화소 사이의 차분을 양자화하고, 그 값 Q$_1$,Q$_2$, Q$_3$로부터 컨텍스트 정수(Q)의 결정을 위해 우선 순위를 정한 후, 3차원 가상좌표 위로의 할당을 고려한다. 또한, 제안 방법과 JPEG-LS의 near-lossless부분을 비교하여, 다양한 영상에 대하여 적용시켜 본 결과, 제안한 방법의 압축률과 손실이득이 훨씬 좋음을 보인다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.327-335
• /
• 1998

Many kinds of map projection have been used, since this cannot be done without a distortion and seemless representation of the globe. To overcome the continues representation of large digital terrain information by the global coordinate system , to find out the sources of projection error and optimizing method, and to increase the map accuracy, specific map projection researches are needed. In this study, improvements of map projections are suggested for small scale mapping which covering entire Korean peninsula based on theoretical evaluation and limits of current map projection. Furthermore, distortion factors, positional errors, and accuracy increasing method are evaluated.

• Journal of Korean Society for Geospatial Information Science
• /
• v.9 no.2 s.18
• /
• pp.63-71
• /
• 2001

GPS allows a user with an appropriate receiver to obtain their position anywhere on the Earth's surface. The use of GPs has highlighted the shortcomings of national reference systems, and many countries are in the process of establishing new geodetic frameworks in order to overcome these shortcomings. Korea National Geography Institute has established a new geocentric datum and presented the its time frame for implementation. In this paper, I studied the considerable matters of digital mapping authority and users for converting the geodetic datum and coordinate system and suggested the steps of public relations for GIS users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.12
• /
• pp.1002-1016
• /
• 1990

This paper described design and implementation of stereo vision system, and also, proposed method for displacement estimation of 3-D moving object using this system. The extraction of moving object is obtained by difference image algorithm. Geometrical position of 3-D moving object is calculated form the mapping of center area of two's 2-D object. 3-D coordinate position produced space depth, moving velociity, distance, moving track and proved displacement estimation of 3-D moving object.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.429-436
• /
• 2003

A new linkage framework between elastic shell element with finite rotation and computar-aided geometric design (CAGD) (or surface is developed in the present study. The framework of shell finite element is based on the generalized curved two-parametric coordinate system. To represent free-form surface, cubic B-spline tensor-product functions are used. Thus the present finite element can be directly linked into the geometric modeling produced by surface generation tool in CAD software. The efficiency and accuracy of the Previously developed linear elements hold for the nonlinear element with finite rotations. To handle the finite rotation behavior of shells, exponential mapping in the SO(3) group is employed to allow the large incremental step size. The integrated frameworks of shell geometric design and nonlinear computational analysis can serve as an efficient tool in shape and topological design of surfaces with large deformations.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.8
• /
• pp.500-505
• /
• 2003

In this paper, the method to register multiple sets of skull CT images to absolute coordinate system is proposed. Contrary to correspondence paired mapping of previous techniques, four anatomical landmark points, three coplanar points and one non-coplanar point, compose three principal axes simple and unique for efficient registration by means of rigid body transformation. Throughout the numerical simulation with added random noises, the error performances in terms of different rotation and rounding-off of landmark points, and incorrect localization of anatomical landmark and target points are quantitatively analyzed to generalize the proposed technique. Experiments using real skull CT images demonstrate the feasibility for an efficient use in clinical practice.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.2
• /
• pp.85-92
• /
• 2010

This study shows the path generation algorithm for an UGV (Unmanned Ground Vehicle). The developed UGV frame which has a 4-wheel driven mechanism and diesel source is applied. Proposed vehicle system in this research is aimed to military purpose. To achieve the unmanned autonomous driving, following two main issues are considered. First, behavior module for positioning and posture of vehicle system and second, cognition module to receive the information from environment are proposed and verified. To do this, rover which can acquire the positioning information from earth coordinate and IMU (Inertial Measurement Unit) which can measure the posture are combined to design the path planning algorithm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.4
• /
• pp.267-277
• /
• 2019

Photogrammetry and computer vision are identical in determining the three-dimensional coordinates of images taken with a camera, but the two fields are not directly compatible with each other due to differences in camera lens distortion modeling methods and camera coordinate systems. In general, data processing of drone images is performed by bundle block adjustments using computer vision-based software, and then the plotting of the image is performed by photogrammetry-based software for mapping. In this case, we are faced with the problem of converting the model of camera lens distortions into the formula used in photogrammetry. Therefore, this study described the differences between the coordinate systems and lens distortion models used in photogrammetry and computer vision, and proposed a methodology for converting them. In order to verify the conversion formula of the camera lens distortion models, first, lens distortions were added to the virtual coordinates without lens distortions by using the computer vision-based lens distortion models. Then, the distortion coefficients were determined using photogrammetry-based lens distortion models, and the lens distortions were removed from the photo coordinates and compared with the virtual coordinates without the original distortions. The results showed that the root mean square distance was good within 0.5 pixels. In addition, epipolar images were generated to determine the accuracy by applying lens distortion coefficients for photogrammetry. The calculated root mean square error of y-parallax was found to be within 0.3 pixels.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.11-19
• /
• 2014

The natural user interface/experience (NUI/NUX) is used for the natural motion interface without using device or tool such as mice, keyboards, pens and markers. Up to now, typical motion recognition methods used markers to receive coordinate input values of each marker as relative data and to store each coordinate value into the database. But, to recognize accurate motion, more markers are needed and much time is taken in attaching makers and processing the data. Also, as NUI/NUX framework being developed except for the most important intuition, problems for use arise and are forced for users to learn many NUI/NUX framework usages. To compensate for this problem in this paper, we didn't use markers and implemented for anyone to handle it. Also, we designed multi-modal NUI/NUX framework controlling voice, body motion, and facial expression simultaneously, and proposed a new algorithm of mouse operation by recognizing intuitive hand gesture and mapping it on the monitor. We implement it for user to handle the "hand mouse" operation easily and intuitively.