• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.38-46
• /
• 1996

This paper discusses the feasibility of Ultrasonic Nondestructive Evaluation (UNDE) technique for sport weld quality. Ultrasonic c-scan image assisted by image processing technique was used for Nondestructive Evaluation(NDE) of spot weld quality. Ultrasonic testing results obtained were confirmed and compared by Optical Microscope and SAM(Scanning Acoustic Mircroscope) observation of the spot-weld cross section, The results show that the nugget dinameter can be successfully measured with the accuracy of 0.5mm. It was ascertained that ultrasonic c-scan technique is very effective method for the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of the corona bond from nugget. Additional support for the above conclusions is provided by the results for galvanized steel. The ultrasonic results for galvanized welds generally correspond to the results for uncoated steel. Finally, it was found that the above-mentioned technique can be sufficiently applied to NDE method for securing the Quality Assurance(QA) of spot welded products in production line.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.7-12
• /
• 2002

• 한국생산제조학회지
• /
• 제4권2호
• /
• pp.38-45
• /
• 1995

The diagnosis and monitoring system of abnormal cutting condition is necessary to realize precision machining proces and factory automation, which are final goal of metal cutting in order to develop this system, theimage processing technique has been investigated in machining process. In theis paper, the measurement system of tool wear using computer vision is designed to detect the wear pattern by non-contact and direct method and get the realiable wear information about cutting tool. We measured the area of the side and front part of the diamond core dril which is used in 40kHz ultrasonic vibration machine.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.5-10
• /
• 2000

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2002년도 추계학술대회 논문집
• /
• pp.115-121
• /
• 2002

The growth of semiconductor industry attracted to researchers like design, facility technique and making small size chip areas. But nowadays, cause of technology extension and oversupply and price down, yield improvement is the most important point on growth. This paper describes the computer mode]ing technique as the solutions to analyze the problem, to formalize the semiconductor manufacturing process and to build advanced manufacturing environments. The computer models are built referring an existing 8' wafer production line in Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.300-306
• /
• 1987

This paper deals with a modeling of manufacturing system and a model analysis by a SIMAN language. A flow of production process is analyzed, and a mathematical model on the basis of the analyzed data is simulated by a SIMAN language. An object of this study is to achieve an optimization of production a reduction of cost, and an improvement of quality by a applicable line-balancing technique and an optimization technique in a real factor induced an analysis and synthesis of the result of simulation.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.108-120
• /
• 1996

A new technique and theory are proposed which correct orientation of a cylinder to perform a reliable measurement of the surface profile. We analyze characteristics of machined surfaces, e.g., ground, lapped and turned surfaces. Based upon the results. the optimum correction technique is derived by the statistical method. To verify the techinques, measurements are carried out by using the contact stylus profilometer on a controllable table. The measurement shows that surface information of cylinders can be acquired with high accuracy.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1990년도 춘계공동학술대회논문집; 한국과학기술원; 28 Apr. 1990
• /
• pp.222-244
• /
• 1990

A multi-echelon structure of manufacturing and distribution system in considered, where the raw materials are transformed into a finished good through a number to manufacturing echelons and it is distributed to the lower echelons(retailers, or customers). The raw material, work-in-process, finished good inventory and the distribution costs are unified into one model. The objective is to determine the ordering policy of raw materials, manufacturing lot size, the number of sub-batch and the distribution policy of the finished good which minimize the annual total system cost. A computer program for a heuristic search technique is developed, by which a numerical example is examined.

• 제어로봇시스템학회논문지
• /
• 제3권3호
• /
• pp.305-310
• /
• 1997

In this paper, a fuzzy set based machine-cell formation algorithm for cellular manufacturing is presented. The fuzzy logic is emoloyed to express the degree of appropriateness when alternative machines are specified to process a part shape. For machine grouping, the similarity coefficient based approach is used. The algorithm produces efficient machine cells and part families which maximize the similarity values.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.294-302
• /
• 2015

PURPOSE. The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). MATERIALS AND METHODS. Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (${\alpha}=.05$). RESULTS. The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. CONCLUSION. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.