• 대한산업공학회지
• /
• 제33권3호
• /
• pp.364-372
• /
• 2007

The cost modeling of the LCD manufacturing system with the repair and the rework process is hard to achieve because of it's complex manufacturing process. The technical cost modeling divides each process separately and hierarchically, so it is very useful to calculate the total manufacturing cost of the complex manufacturing system. We applied the method to the complex LCD manufacturing system to obtain more accurate cost model. Yields are the most important control parameters in manufacturing. In this paper, we propose a yield based cost model for the LCD manufacturing system and reveal the relationship between manufacturing yield and cost. Through the model, we can estimate the manufacturing cost on the basis of yields that are control indicators of manufacturing. Some simulations are performed to observe the effects of the yield to the cost, and the results are coincide with the real situation. With the proposed model, we expect to develop some optimization problems for enlarging productivity in the LCD industry.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.411-414
• /
• 1995

Statistical Process Control (SPC) is a set of methodologies for signaling the presence of undesired sources of variation in manufacturing processes. Expert System in SPC can serve as a valuable tool to automate the analysis and interpretation of control charts. In this paper we put forward a method of successful application of Expert System to SPC in manufacturing process.

• 한국산업정보학회논문지
• /
• 제1권1호
• /
• pp.111-125
• /
• 1996

This paper presents a statistical process control(SPC) system in the electronic parts manufacturing process. In this system, an SPC method is integrated into the automated inspection technology on a real time base. It shows how the collected data can be analyzed with the SPC to provide process information. also presented are stuided of subpixel image processing technology to improve the accuracy of parts mearements , and the cumulative-sum(CUSUM) control chart for fraction defectives.An application of the developed system to connector manufacturing process as a part of computer integrated manufacturing (CIM) is presented.

• 품질경영학회지
• /
• 제24권2호
• /
• pp.113-127
• /
• 1996

A various quality data are produced during nuclear fuel fabrication. In order to control quality data efficiently, Computerization of Quality Information System(QIS) using personal computer was established. Database control software and analysis software were developed for QIS. QIS was applied the fuel manufacturing and quality inspection. Quality trend analysis, process control, process capability and quality history docket for nuclear fuel manufacturing were performed by QIS. Through the Quality Information System, quality assurance, quality control, process control and manufacturing engineering were performed efficiently in nuclear fuel manufacturing.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1996년도 춘계학술대회
• /
• pp.15-15
• /
• 1996

A shop floor control system (SFCS) is the central part of a CIM system used to control the activities of several pieces of manufacturing equipment (e.g., NC machines, robots, conveyors, AGVs, AS/RS). The SFCS receives orders and related process plans, and then performs selecting a specific process routing, allocating resources, scheduling the workpieces, downloading the processing instructions (e.g., RS-274 instructions for NC machines, VAL II programs for robot), monitoring the progress of activities, detecting and recovering from errors, and preparing reports on the status of the manufacturing system. Simulation has been utilized in discovering control policies used for resolving shop floor be control problems such as resource contentions, part dispatching, deadlock. The simulation model must be designed to respond to real-time data coming from a shop floor. However, to rapidly build a realtime simulation model of SFCS cannot be easily accomplished. This talk is to address an automatic program generator of discrete event simulation model for shop floor control from process plans and resource models. The program generator is capable of constructing complete discrete simulation models for multi-product and multi-stage flexible manufacturing systems.

• 한국기계가공학회지
• /
• 제2권4호
• /
• pp.46-52
• /
• 2003

For position control of electro-hydraulic servo system, single rod cylinders and double rod cylinders are used. Single rod cylinders have simple structure for manufacturing but different volume ratio of two sides induce to non-linearity in process of then mathematical modeling. So only with conventional PID control method it is difficult to control single rod cylinders precisely. For mole precise position control of single rod cylinders, a controller which is inserted a velocity feedback PID controller and MRAC controller are proposed. With experiment control performances of three control methods are compared. In case of experiment, for external varying load to the system, a hydraulic cylinder and a pressure control valve are used. In conclusion a MRAC is considered a suitable control method for external varying load.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.89-92
• /
• 1997

The objective of this paper is to provide an alternative framework for the integration of process planning and scheduling in cellular manufacturing. The concept of an integrated cellular manufacturing system is defined and the system architecture is presented. In an integrated cellular manufacturing system, there are three modules : the process planning module, the manufacturing-cell design module, and the cell-scheduling module. For each module, the tasks and their activities are explained.

• 대한산업공학회지
• /
• 제40권1호
• /
• pp.43-51
• /
• 2014

Statistical process control (SPC) is an important technique for monitoring and managing the manufacturing process. In spite of its easiness and effectiveness, some problematic sides of application exist such that the SPC techniques are hardly reflect the changes of the process conditions. Especially, update of control limits at the right time plays an important role in acquiring a reasonable performance of control charts. Therefore, we propose the control chart performance evaluation index (CPEI) based on count data model to monitor and manage the performance of control charts. The CPEI could indicate the degree of control chart performance and be helpful to detect the proper update cycle of control limits in real time. Experiments using real manufacturing data show that the proper update intervals are made by proposed method.

• 산업경영시스템학회지
• /
• 제31권4호
• /
• pp.168-176
• /
• 2008

In an environment where manufacturing conditions such as product lines keep changing, manufacturing control systems need to be continually maintained and upgraded according to the change. This requires an effective system implementation methodology. In this paper, a methodology based on the multi-criteria similarity comparison of manufacturing processes is proposed. A newly introduced process is compared with existing ones based on the multi-criteria similarity, and candidates for software reuse are selected from stored modules according to the overall process characteristics. The proposed methodology has been tested for an electronics manufacturing company's manufacturing control system, and the result has been satisfactory in that it can save time and efforts for system implementation.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.167-174
• /
• 2012

In the manufacturing process the most widely used $\bar{X}$ chart has been applied to control the process mean. Also, Accelerated Life Test(ALT) is commonly used for efficient assurance of product life in development phases, which can be applied in production reliability acceptance test. When life data has lognormal distribution, through censored ALT design so that censored ALT data has asymptotic normal distribution, $ALT\bar{X}$ control chart integrating $\bar{X}$ chart and ALT procedure could be applied to control the mean of process in the manufacturing process. In the situation that process variation is controlled, $Z_p$ control chart is an effective method for the very small fraction nonconforming of quality characteristic. A simultaneous control scheme with $ALT\bar{X}$ control chart and $Z_p$ control chart is designed for the very small fraction nonconforming of product lifetime.