• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.235-246
• /
• 2018

Paeony has pharmacological activities such as anti-inflammatory, anti-allergic, anti-bacterial, central inhibitory, gastric secretion inhibition, and antispasmodic activities. In addition, its antioxidant activity and whitening effect being reported, thus it is being explored as raw materials for cosmetics. We compared the changes in the contents of paeoniflorin and paeonol in Peony extracts, depending on the changes of extracting solvents, temperature and time. The HPLC method was set up for simultaneous analysis, the system suitabilities were confirmed by using the calibration curves and the QC samples for each assay batch. Paeonol was detected only in roots, and paeoniflorin was higher in leaf and flower than root. Higher concentrations of both ingredients were extracted when the root was used after grinding to a suitable size, and when 30% 1,3-butylene glycol was used as the extraction solvent. Also the concentrations tended to increase at higher temperature and longer time, but the increase was gradual at over $75^{\circ}C$ and 4 hours. The ratio of root, leaf and flower was determined to be 2+2+1g/0.5kg of batch, reaching the contents criteria of paeoniflorin and paeonol. Finally, we selected as the best extraction condition when the raw materials are mixed with 2+2+1g/0.5kg and extracted with 30% 1,3-butylene glycol as an extraction solvent at $75^{\circ}C$ for 4 hours, considering both the concentrations of two components and the cost of raw materials and manufacturing process, The extraction units were scaled up to 10 kg under this condition.

• Applied Microscopy
• /
• v.38 no.3
• /
• pp.175-183
• /
• 2008

Liver regeneration is a result of highly coordinated proliferation of hepatocytes and non-parenchymal liver cells. At this process, induction of metallothionein (MT), which is low molecular and cysteine rich, has been reported. The present study was carried to find the ultrastructure of hepatocytes and determine the expression of MT in regenerating rat liver after partial hepatectomy. As a result, the remnant liver after PH grew fast from 1 day until 7 days. Various changes were morphologically observed. Disintegration of cell plates and liver lobule appeared shortly after PH. And hepatocytes showed the rapid proliferation, characterized by high nuclear cytoplasmic ratio, weak intercellular junctional complexes, chromatin condensation, increase of ribosomes and mitochondria, and temporary increase of lipid droplets. Finally, remodeling of the liver lobule was completed through the rearrangement of blood vessels and cell plates by 7 days after PH. On histochemistry, immunoreactivity indicating the presence of MT appeared moderately throughout the cytoplasm of control rat hepatocyte. After PH, positive reactions for MT increased at the cytoplasm and the nucleus. These results suggest that the remnant liver cells immediately entered cell proliferation and increase of MT expression after PH. It is thought that MT protein might be associated with transfer of some factors needed to cell division from the cytoplasm to the nucleus for regeneration of the liver after PH.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.178-188
• /
• 2015

Microbial quality of baked egg products was evaluated by counting the levels of sanitary indicative bacteria (aerobic plate counts, coliforms, and E. coli), L. monocytogenes and Salmonella spp. at the critical control points (CCPs) of manufacturing process. In addition, the survival and growth of foodborne pathogens in various egg products (cheese, tuna, tteokgalbi, pizza omelets, baked egg, and steamed egg) were investigated at 4, 10, and $15^{\circ}C$. The contamination level of aerobic plate counts decreased from 4.67 log CFU/g at CCP 1 to 0.56 log CFU/g at CCP 3 in baked egg products. No coliforms and E. coli were detected at all CCPs. Although L. innocua and Salmonella spp. were identified at CCP 1, no L. monocytogenes and Salmonella spp. were detected in the final products. The contamination levels of aerobic plate counts and coliforms in egg strips and number of aerobic plate counts in Tteokgalbi omelet are higher than the microbiological standard of processed egg products. At $10^{\circ}C$, the growth of all pathogens was not prevented in omelet and baked egg, but the populations of S. Typhimurium and E. coli were reduced in steamed egg at $10^{\circ}C$, regardless of the presence of other pathogens. The growth of L. monocytogenes was faster than that of S. Typhimurium and E. coli in omelet. More rapid growth of S. Enteritidis than S. Typhimurium was observed in egg products, indicating the greater risk of S. Enteritidis than S. Typhimurium in egg products.

• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.179-185
• /
• 2013

This study was conducted to investigate the effect of curing additives on color property of smoked duck meat. Curing process of samples was performed one of the following treatments: C, non-curing: T1, 2.43% salt: T2, 2.43% salt + 0.49% tripolyphosphate (TPP): T3, 2.43% salt + 0.49% TPP + 0.002% nitrite: T4, 4.76% duck seasoning: and T5, 1.47% salt + 0.24% TPP + 0.2% L-ascorbic acid. Instrumental meat color of both breast and thigh of smoked duck showed that the CIE $a^*$ value of the T4 was significantly (p<0.05) higher than that of the other treatments, whereas T5 had a significantly (p<0.05) higher CIE $b^*$ value than the other treatments. In results of nitroso pigment, T5 of smoked duck breast was significantly (p<0.05) higher value compared to other treatments, whereas T3 and T5 of smoked duck thigh had a significantly (p<0.05) higher value than other treatments. Heme pigment contents of control and T5 was significantly (p<0.05) higher value compared to other treatments in smoked duck breast. Meat color of T3 by sensory evaluation showed redder (p<0.05) than other treatments. These results suggested that using L-ascorbic acid is revealed to be pink color without nitrite or pigment when manufacturing of smoked duck meat.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Ginseng Research
• /
• v.26 no.4
• /
• pp.219-225
• /
• 2002

Study was performed to know the effects of Panax ginseng C.A. Meyer hairy root due to $^{60}$ Co ${\gamma}$-ray irradiation. We irradiated the hairy roots under the various $^{60}$ Co ${\gamma}$-ray; 0.5~4 Krad. The growth of hairy roots is inhibited over 3 Krad treatment. The lateral roots are used as a cell line after removing the apical meristem of hairy roots irradiated below 2 Krad. We selected 206 hairy root cell lines having various different growth rates and forms, and incubated in the 1/2 Murashige & Skoog(MS) medium in the absence of hormone. We selected 10 out of 206 showing superior growth. Among those, ${\gamma}$-GHR 70 and ${\gamma}$-GHR 94 showed higher growth; 34.5, 44.7%, respectively. We observed shapable, sizable characteristics according to the width of the primary roots, the process formation of the lateral roots, and the growth of lateral roots. The discriminable cell line showed that primary root is thinner, and has a vigorous growth. 8 out of 10 had much more contents than control in the aspect of the ginsenoside. ${\gamma}$-GHR 59 and ${\gamma}$-GHR 94 showed higher contents; 19, 16.9%, respectively. Therefore, we selected ${\gamma}$-GHR 70, ${\gamma}$-GHR 94 as a superior cell line in the aspect of ginsenoside contents, and growth among those irradiated by ${\gamma}$-ray. According to content of ginsenoside, Rb$_2$ effective in anticancer has 7.5% of ${\gamma}$-GHR 59. Rc, also effective in anticancer showed 16.2% content increasement of ${\gamma}$-GHR 69. It is thought that those lines will be effective in manufacturing ginsenoside. Gene analysis (VNTRP) related to the mutation is in progress.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.840-845
• /
• 2007

The chromaticity, mechanical, and sensory properties of madeleine were investigated during its manufacturing process based on additions of black bean chungkukjang flour containing functional health ingredients and a high nutritient value. 1. The moisture content decreased with increasing content of the chungkukjang flour$(16.1{\sim}13.7%)$. 2. The brightness of the Madeleine decreased significantly from 75.24 to 53.61 by increasing the content of the black bean chungkukjang flour. The degree of red color increased significantly from -0.31 to 4.93 by increasing the content of the black bean chung kukjang flour. 3. For the mechanical properties, the hardness increased significantly with increasing amounts of the black bean chungkukjang flour (p<0.05). The degree of fracturability, adhesiveness, and gumminess also increased with the increasing the content, but the fracturability showed no difference by either addition. The springiness and cohesiveness decreased significantly by increasing the content of the black bean chungkukjang flour, showing an opposite result compared to the hardness. 4. The results of the sensory evaluation indicated significant differences in color among the samples(p<0.05). The color of the madeleine samples with added black bean chungkukjang flour was more preferred than that of the sample without any additive. The degree of preference increased in the order of the quantity of the additive. The moistness and softness became significantly drier and less soft, respectively, with an increasing quantity of the black bean chungkukjang flour (p<0.05). For the overall acceptance, the BC10 sample added with 10% of black bean chungkukjang flour added had the highest acceptance. This may be because it did not have a strong chungkukjang odor and had the fewest differences from the control Madeleine without the additive, in terms of its moistness and softness. Based upon these results, adding10 % of black bean chungkukjang flour in the manufacture of Madeleine is an appropriate quantity with regard to its structural and sensory characteristics.

• Journal of Food Hygiene and Safety
• /
• v.21 no.4
• /
• pp.263-268
• /
• 2006

The purpose of this study was to monitor and compare the contamination levels of total aerobic bacteria, coliform groups and Escherichia coli from fruit-vegetable salad (FS), aquatic hard-boiled food (AF) and salt-fermented fishery product with spices (SP). The samples of ready-to-eat food were 25 FS, 11 AF and 7 SP. The contamination levels of total aerobic bacteria in FS, AF and SP were $4.56\sim7.45\;log_{10}$ CFU/g (FS), $2.43\sim7.03\;log_{10}$ CFU/g (AF), respectively. The contamination levels of coliform groups were $4.51\sim6.71\;log_{10}$ CFU/g (SP). $4.00\sim6.66\;log_{10}$ CFU/g (FS), $1.70\sim5.20\;log_{10}$ CFU/g (AF), respectively. The contamination levels of E. coli were $2.50\sim4.42\;log_{10}$ CFU/g (SP), $0\sim3.58\;log_{10}$ CFU/g (FS), $1.11\sim4.68\;log_{10}$ CFU/g (AF), respectively. The difference of completed packaging salad and instant packaging salad are not different about contamination levels. In conclusion, the results of this study indicated that the hygienic levesl of salads, hard-boiled foods and salted fishes were very poor. So our government need to improve the control plan for food safety from manufacturing process to market.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).