• Proceedings of the SOHE Conference
• /
• 2004.12a
• /
• pp.87-87
• /
• 2004

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.04a
• /
• pp.8-14
• /
• 1994

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.187-190
• /
• 2007

The objective of this paper is to investigate into the development of injection mould with high cooling characteristics using a direct metal RP technology. In order to manufacture the injection mould with a high cooling rate, three-dimensional conformal cooling channels have been generated in the mould. DMT process, which is one of direct metal RP technologies, has been utilized to directly manufacture the metallic mould with three-dimensional conformal cooling channels. In order to examine the performance of the designed mould, injection molding tests have been carried out. The results of the experiments have been shown that a cooling time and the injection time of the proposed mould are reduced by the factor of five and two times in comparison with the injection mould with linear cooling channels.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1744-1746
• /
• 1999

In this paper, we give pressure stimulation into organic ultra thin films and detected the induced displacement current properties, and then manufacture a device under the accumulation condition. In processing of a device manufacture, we can see the process is good from the change of a surface pressure and transfer ratio of area per molecule of organic ultra thin films. The structure of manufactured device is MIM(Au/polyimide LB films/AU), the number of accumulated 19 layers. I-V characteristic of the device is measured from -5[V] to +5[V]. The maximum value of measured current is increased as the number of accumulated layers are decreased. The insulation of a thin film is better as the interval between electrodes is larger, and the insulation properties of a thin film is better as the distance between electrodes is larger.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.2
• /
• pp.1-8
• /
• 2014

The automobile manufacture is a typical integrated assembly production that the numerous parts are committed sequentially to the assembly line. In this type of automobile manufacture, WBS (white body storage) and PBS (paint body storage) are operated to adjust the production sequence and to buffer. Starvation (impossibility of production owing to the insufficient supply) or blocking (impossibility of production owing to the over capacity) could occur in some chance, hence, both storages (WBS, PBS) are integrated as a prevention. This system is called integrated storage. In this paper, we suggest the simulation model of 'WBS-PBS integrated storage' and methodology of operation considering both 'Color grouping' and 'Option leveling.'

• The Journal of Information Technology
• /
• v.8 no.4
• /
• pp.43-50
• /
• 2005

In this paper, we describe a study on the relationship between photographic emulsion manufacture and hardening test of color paper. The hardener was prepared by the reaction of cyanuric chloride with sodium hydroxide, disodium hydrogenphosphate-12-water and trisodium phosphate-12-water in the presence of water. The hardener used in this study is a 2,4-dichloro-6-hydroxy-1,3,5-triazine mono sodium salt. The hardening test of photographic emulsion was studied respectively at pH 5.5, 7, 8.5 and about increasing temperature. Novel hardener can be used in photo-graphic emulsion of color paper and showed very good hardening effect.

• The Research Journal of the Costume Culture
• /
• v.20 no.4
• /
• pp.616-620
• /
• 2012

The objectives of this paper are to examine some of the factors which may account for the rise in predominance of British textile manufacture in the eighteenth and nineteenth centuries. This paper identifies a range of important eighteenth century British inventions and associated developments, such as the 'factory' system, which stimulated expansion in textile manufacture in the British Isles and led to the rise in international importance of various 'heritage textile industries', including the Lancashire cotton industry, the Yorkshire woollen and worsted industry, the Dundee jute industry and the Irish linen industry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.10
• /
• pp.1493-1498
• /
• 2012

The objective of this investigation was to evaluate the possibility of substituting Amaranthus pigments for nitrates in the of manufacture pork sausage. Five treatments of pork sausages (5% fat) with two levels of sodium nitrite (0 and 0.015%), or three levels (0.1%, 0.2% and 0.3%) of pigments extracted from red Amaranthus were produced. The addition of Amaranthus pigments resulted in the significant increase of $a^*$ values, sensory color, flavor and overall acceptance scores, but the significant reduction of $b^*$ values, TBA values and VBN values (p<0.05). Based mainly on the results of overall acceptance during 29 d storage, it could be concluded that Amaranthus pigments showed a potential as nitrite alternative for pork sausage manufacture.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.115-118
• /
• 2014

Since 1st July 2012, the our Goverment and KOGAS have been adopting a calorific value range system from the standard calorific value system. Domestic power plant companies and KOGAS have asked GT manufacture about the effects of the reduction of the calorific value. We received GT manufacture's answer to the question on April 12.2011. Gas components of some GT models were limited to no more than 9% of the C2+ content. Now some of GTs remain under debating whether effects on variation of gas heating or not.

• Design & Manufacturing
• /
• v.8 no.1
• /
• pp.27-30
• /
• 2014

Alloy tool steel such as SKD11 and SKD61 or high speed tool like SKH51 are used as materials for semiconductor dies. Cavities, curl blocks, pot blocks and housings are made from those materials. To make those parts from alloy tool steel or high speed tool, one utilizes discharge machining, and mechanical machining including machining center, milling, drilling, forming grinding and others. In the process of cutting machining and polishing, the die materials become unsuitable for machining owing to bubbles and foreign substances in them, which hinders production process. Therefore, this study focuses on die material selection criteria, and on analysis and comparison of material characteristics to help companies to solve their problems, make die manufacture less burdensome and extend die life.