• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.61-68
• /
• 2009

We present a fast 3D shape deformation method that achieves smoothly deformed result by approximating a rigid transformation based on moving least squares (MLS). Our modified MLS formulation reduces the computation cost for computing the optimal transformation of each point and still keeps the rigidity of the deformed results. Even complex geometric shapes are easily, intuitively, and interactively deformed by manipulating point and ellipsoidal handles.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1455-1460
• /
• 2007

This paper reports the piezoelectric microspeakers that are audible in open air with high quality piezoelectric AlN thin film deposited onto Mo/Ti electrode. This successful achievement, compared to the previous results, is followed by manipulating two material properties: the one is to use a compressively stressed silicon nitride film as a supporting diaphragm (even tensile stressed, around +20 MPa) and the another is to use high quality AlN thin film with compressive residual stress (less than -100 MPa). With these materials, the Sound Pressure Level (SPL) of the fabricated micro speakers shows more than 60 dB from 100 Hz to 15 kHz and the highest SPL is about 100 dB at 9.3 kHz with 20 Vpeak-to-peak sinusoidal input and with 10 mm distances from the fabricated micro speakers to the reference microphone (B&K Type 2669 & 4192L).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.294-298
• /
• 2000

As the LED or LCD technology has been developed, if we use LED or LCD pannel, more wide color range coluld be obtained as CRT monitor. Specially, full color LED display is developed by high brightness blue LED. It can be applicable to display pannel with a long-life, wide visible angle and high brightness. A display pannel shows the images of CRT monitor performed by the main computer. Graphic application in the main computer is therefore more important in the market. Conventional 3D STUDIO, one of graphic softwares, has difficulties in manipulating and understanding the specific terminology so that one may need more time to learn it. We, therefore, developed graphic application which can recycle the conventional 3D images by creating or editing the image easily.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.22-29
• /
• 2005

A material cloud method, which is a new topology optimization method, is presented. In MCM, an optimal structure can be found out by manipulating sizes and positions of material clouds, which are lumps of material with specified properties. A numerical analysis for a specific distribution of material clouds is carried out using fixed background finite element mesh. Optimal material distribution can be element-wisely extracted from material clouds' distribution. In MCM, an expansion-reduction procedure of design domain for finding out better optimal solution can be naturally realized. Also the convergence of material distribution is faster and well-defined material distribution with fewer intermediate densities can be obtained. In addition, the control of minimum-member sizes in the material distribution can be realized to some extent. In this paper, basic concept of MCM is introduced, and formulation and optimization results of MCM are compared with those of the traditional density distribution method(DDM).

• Journal of Animal Environmental Science
• /
• v.5 no.3
• /
• pp.203-216
• /
• 1999

Recent public concern about air pollution caused by swine production facilities has forced to develop the methods to reduce and control the swine odors. Swine odors were affected the life of pig farm neighborhoods, swine productivity, pig health, diseases, and human right, safety, sanity as negatively. The first approaches of control of swine odors are the change or improve of the classical management systems, which are manure treatment method, manure storage facility, phase feeding, sex-divided feeding, feeder type, liquid-slurry feeding, environment control of swine building and dust control of indoor swine facility. The methods to control odor emission from manure have to include the diet modification as nutritional basis. In recent, research emphasis has focused on manipulating the swine diet to increase the nutrient utilization of the diet to reduce excretion products and reduction of odors. There are lots of feed additives and pit additives introduced as practical basis for reducing odor emissions. The ozone treatment method is candidate as the good system for reducing swine odor. But this system is still too expensive to practice in present.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.24 no.1
• /
• pp.13-17
• /
• 2013

Laser laryngeal microsurgery is currently the primary method of treatment of various laryngeal diseases. The development of laryngeal microsurgery came from the introduction of a small spot $CO_2$ laser micromanipulator and more precise microlaryngeal instruments. $CO_2$ laser laryngeal microsurgery has enabled very precise surgery because it has small focus size and hemostatic effect. There are some limitations to the use of the $CO_2$ Laser such as adjacent tissue damage and vocal fold scarring. These problems can be minimized through understanding the mechanisms by which lasers function and correctly manipulating the parameters under a surgeon's control. We should also recognize the safety of $CO_2$ laser for the surgeon to precisely perform the procedure.

• Journal of Magnetics
• /
• v.16 no.1
• /
• pp.19-22
• /
• 2011

[ $BiFeO_3$ ]is a multiferroic material that attracts attentions of many research groups due to its potential as being ferroelectric and ferromagnetic above room temperature. We have prepared both undoped- and Mn-doped $BiFeO_3$ by sol-gel auto-ignition method. Doping of Mn has resulted in decreasing grain size from 60 to 32 nm. X-ray diffraction data show that the samples are pure and single-phase. Infrared measurements on $BiFeO_3$ and Mn-doped $BiFeO_3$ revealed intrinsic stretching vibrations of tetrahedral sites of $Fe^{3+}$-O and of octahedral $Bi^{3+}$-O as well. On the other hand, as the Mn concentration increases, the magnetic moment of $BiFeO_3$ increases. It gives some suggestions in manipulating structural and magnetic properties of $BiFeO_3$ by doping Mn.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.191-194
• /
• 2012

Rendering maps is an essential feature of the user interface component of a location based service (LBS) system. However, a developer may not too much worry about implementing the rendering maps part of his or her system because there are quite a few publicly available libraries that provide all kinds of functions of manipulating maps. Google Maps, Yahoo Map, Naver Map, Daum Map, and so on are example sites that provide those libraries. Rendering drawings is to indoor LBS as rendering maps is to LBS. However, there is no such thing as Google Maps that provides libraries for rendering drawings. This paper introduces a few web services and a library that is useful in developing user interfaces of indoor LBS systems.

• Journal of information and communication convergence engineering
• /
• v.17 no.2
• /
• pp.117-127
• /
• 2019

In software engineering, to ensure reliability between systems, describing both system architecture and assurance arguments between system elements is considered necessary. There are proposals for system architecture assurance, but use of these traditional methods often requires development of different diagrams using different editors. Because the visual sense of the traditional methods is inadequate, errors readily occur when manipulating different diagrams. Therefore, it is essential that the assurance of dependability between components and systems is visualized and easy to understand. In this paper, an integrated approach to describe the relationship between system actors and system architecture is proposed, and this approach is clarified using an enterprise architecture modeling language. A case study is carried out and comparison to the traditional approach $d^*$ framework is explained. The comparison results show that the proposed approach is more suitable for ensuring dependability in system architecture.

• ALGAE
• /
• v.34 no.1
• /
• pp.35-43
• /
• 2019

Genetic study of haploid organisms offers the advantage that mutant phenotypes are directly displayed, but has the disadvantage that strains carrying lethal mutations are not readily maintained. We describe an approach for generating and performing genetic analysis of diploid strains of Chlamydomonas reinhardtii, which is normally haploid. First protocol utilizes self-mating diploid strains that will facilitate the genetic analysis of recessive lethal mutations by offering a convenient way to produce homozygous diploids in a single mating. Second protocol is designed to reduce the chance of contamination and the accumulation of spontaneous mutations for long-term storage of mutant strains. Third protocol for inducing the meiotic program is also included to produce haploid mutant strains following tetraploid genetic analysis. We discuss implication of self-fertile strains for the future of Chlamydomonas research.