• Journal of Industrial Convergence
• /
• v.17 no.2
• /
• pp.29-34
• /
• 2019

The purpose of this study is to analyze the achievements of employment support by the government support specialization project. The data used in this study are based on the comparison of 5 - year employment support field and the operation results of the program until 2014-2018. The results of the study are as follows. First, the overall employment rate of the university has been continuously increased. Especially, the employment rate of the specialization department has been higher than the employment rate of the non - specialization department. Second, as a result of the analysis of the employment capacity strengthening index and the learning capacity strengthening index, it showed a steady increase in each year and contributed to the cultivation of customized talents required by the local society and the national industry. Third, as a result of analyzing the satisfaction of students who are business users, it was confirmed that the business reflecting the demands of the consumers was realized. Fourth, the continuous improvement of the business and the reflux have made the infrastructure of the employment support project more advanced and the system of supporting employment of the university systematically established. In conclusion, the result of the employment support project according to the specialization program showed excellent results and it is necessary to complement theses results when establishing related business plan in the future.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.34-41
• /
• 2021

The purpose of this research is to improve analysis methods of determining the contents of fatty acids in infant formulas and follow-up formulas. A gas chromatography (GC) method was performed on a GC system coupled to flame ionization detector, with a fused silica capillary column (SP2560, 100 m×0.25 mm, 0.20 ㎛). The method was validated using standard reference material (SRM, NIST 1849a). Performance parameters for method validation such as specificity, linearity, limits of detection (LOD) and quantification (LOQ), accuracy and precision were examined. The linearity of standard solution with correlation coefficient was higher than 0.999 in the range of 0.1-5 mg/mL. The LOD and LOQ were 0.01-0.06 mg/mL and 0.03-0.2 mg/mL, respectively. The recovery using standard reference material was confirmed and the precision was found to be between 0.8% and 2.9% relative standard deviation (RSD). Optimized methods were applied in sample analysis to verify the reliability. All the tested products had acceptable contents of fatty acids compared with component specification for nutrition labeling. The result of this research will provide efficient experimental information and strengthen the management of nutrients in infant formula and follow-up formula.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.104-112
• /
• 2021

For extrusion processes in the process industry, the need to build smart factories is increasing. However, in most extrusion production sites, the production method is continuous, and because the properties of the data are undeed, it is difficult to process the data. In order to solve this problem, we present a methodology utilizing a near field communication (NFC) sensor rather than water-based data entry. To this end, a wireless network environment was built, and a data management method was designed. A non-contact NFC method was studied for the production performance-data input method, and an analysis method was implemented using the pivot function of the Excel program. As a result, data input using NFC was automated, obtaining a quantitative effect from reducing the operator's data processing time. In addition, using the input data, we present a case where a bottleneck is improved due to quality problems.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1493-1507
• /
• 2020

The LEOP Cal/Val (Launch and Early Operation Phase Calibration/Validation) was carried out during 6 months after KOMPSAT-3A (KOMPSAT-3A Korea Multi-Purpose Satellite-3A) was launched in March 2015. After LEOP Cal/Val was successfully completed, high resolution KOMPSAT-3A has been successfully distributing to users over the past 8 years. The sub-meter high-resolution satellite image data obtained from KOMPSAT-3A is used as basic data for qualitative and quantitative information extraction in various fields such as mapping, GIS (Geographic Information System), and national land management, etc. The KARI (Korea Aerospace Research Institute) periodically checks and manages the quality of KOMPSAT-3A's product and the characteristics of satellite hardware to ensure the accuracy and reliability of information extracted from satellite data of KOMPSAT-3A. To minimize the deterioration of image quality due to aging of satellite hardware, payload and attitude sensors of KOMPSAT-3A, continuous improvement of image quality has been carried out. In this paper, the Cal/Val work-flow defined in the KOMPSAT-3A development phase was illustrated for the period of before and after the launch. The MTF, SNR, and location accuracy are the key parameters to estimate image quality and the methods of the measurements of each parameter are also described in this work. On the basis of defined quality parameters, the performance was evaluated and measured during the period of after LEOP Cal/Val. The current status and characteristics of MTF, SNR, and location accuracy of KOMPSAT-3A from 2016 to May 2020 were described as well.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_2
• /
• pp.1643-1652
• /
• 2022

Deposited Marine Debris(DMD) can negatively affect marine ecosystems, fishery resources, and maritime safety and is mainly detected by sonar sensors, lifting frames, and divers. Considering the limitation of cost and time, recent efforts are being made by integrating underwater images and artificial intelligence (AI). We conducted a comparative study of You Only Look Once Version 5 (YOLOv5) and You Only Look Once Version 7 (YOLOv7) models to detect DMD from underwater images for more accurate and efficient management of DMD. For the detection of the DMD objects such as glass, metal, fish traps, tires, wood, and plastic, the two models showed a performance of over 0.85 in terms of Mean Average Precision (mAP@0.5). A more objective evaluation and an improvement of the models are expected with the construction of an extensive image database.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.5
• /
• pp.751-757
• /
• 2022

Objective : Tumours of the brain are a rare occurrence accounting for approximately 2% of all neoplasms in adults. Few studies have been done in Nigeria on the profile of brain tumours. The aim of this study is to determine the profile of brain tumours in general and determine the change in Kanofsky Performance Score (KPS) after treatment. Methods : This is a prospective hospital-based study in Kaduna. All consecutive patients over 18 years of age with diagnosis of brain tumours from January 2016 to December 2019 were included in the study. Demographic and clinical data was collected using a proforma during the study. Patients who received treatment were followed up for 12 months. The primary outcome data was the difference in the quality of life as measured by KPS at the point of first contact and at 1-month after treatment and at 12-month follow up. Data obtained was analysed with SPSS version 25.0 for Windows. Descriptive statistics was done to determine the profile. Paired t-test at 95% confidence interval was done to check for significant correlation between the mean KPS. Results : A total of 39 consecutive patients were included in the study. There was a slight male preponderance with a M : F of 1.17 : 1. Meningioma and metastasis were more common in females while gliomas and pituitary tumours were more common in males. The mean age of patients was 49.8 years and standard deviation of 11.8 years. Pituitary tumours were the most common tumours. The most common location of the tumour was frontal lobe followed by the pituitary gland. The mean duration of symptoms before neurosurgical consultation was 38 weeks. The most common presenting symptoms of patient with brain tumour was headache. The quality of life improve compare to the baseline in 81% of patient at discharge and at 1 year follow up. The overall mortality rate was 25.6%. Conclusion : The most common brain tumour in our study is pituitary tumour. Most patients present late. The most common presenting symptoms is headache. There is significant improvement in the KPS of patients following treatment. The overall mortality rate at 1-year post treatment is 25.6%.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.513-523
• /
• 2022

The purpose of settlement management when treating soft ground through preloading is to determine the amount of settlement, check the progression of consolidation, and compare the settlement with the target settlement amount. Of the various methods available for predicting settlement based on measured data, the hyperbolic method was used in this study to analyze the settlement behavior of soft ground considering the creep behavior resulting from staged fill. Two versions of the method were used: the existing hyperbolic method, and a modified hyperbolic method. The existing hyperbolic method predicts the settlement amount using data for the final settlement section only during soft ground treatment through staged fill, for which the coefficient of consolidation behavior (k) was computed to give a predicted final consolidation settlement amount of S_r = 1.05 cm. In comparison, using the modified method, a predicted final consolidation settlement of S_r = 0.50 cm is obtained by considering the data for each staged fill section. These results show that the modified method considering data from the staged settlement was more accurate than the existing method considering data only from the final settlement section. This modification to the hyperbolic method therefore represents an improvement in performance over the existing method.

• Journal of Service Research and Studies
• /
• v.12 no.3
• /
• pp.26-44
• /
• 2022

Job stress experienced during work has a positive effect on the organization, such as performance improvement, but if not properly managed, it can cause physical diseases such as digestive diseases and mental diseases such as depression and neurological diseases. If job stress persists for a long time, it causes emotional exhaustion and depression, which has a significant adverse effect on individuals and organizations, so proper management is essential. Therefore, in this study, a descriptive survey study was conducted using a self-report questionnaire method to find out the relationship between job stress, emotional exhaustion and depression of medical institution workers. As a result of the analysis, it was found that job stress of medical institution workers had a significant (+) effect on emotional exhaustion and depression, and emotional exhaustion of medical institution workers had a significant (+) effect on depression. Through this study, it was found that there was a significant relationship between job stress, emotional exhaustion, and depression of hospital employees, and that emotional exhaustion acts as a parameter in the relationship between job stress and depression. Considering that job stress of hospital employees causes adverse organizational effects, such as threatening workers' mental and physical health and causing deterioration in the quality of medical services, organizational efforts will be needed to relieve and properly manage job stress of hospital employees.

• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.191-202
• /
• 2022

The purpose of this study is to examine the effect of a 10-week body stability exercise program, which was conducted on 24 male football players. The result of the Visual Response Speed Test using BlazePod, showed a significant increase of the upper arms, left foot and right foot for 15 second in number of reactions and reaction time (p<0.001). As a result of evaluating whether or not 7 functional movements were improved in order to evaluate the functional movement screen, Hurdle Step (p=0.001) and Active Straight Leg Rise (p=0.022) movements were significantly improved. significantly improved. As a result of measuring the y-balance Test in order to evaluate the balance ability, composite score(p<0.001) of both sides was significantly improved. The result of evaluating vital capacity, which was conducted to evaluate mobility and muscle endurance, showed a significant improvement in Forced vital capacity(p<0.001) and Forced expiratory volume in 1.0(p=0.003). In conclusion, a 10-week BSE program intervention in high school period, which can most improve the technical fitness necessary for the game in power, agility, leg strength, leg stability, mobility, and muscle endurance, will improve overall technical fitness, prevent football players from being injured and enhance their performance.

• Journal of Christian Education in Korea
• /
• v.73
• /
• pp.117-137
• /
• 2023

This is a case study of an extra-curricular program that designed and implemented maker education based on design thinking to foster a Christian worldview. The program was designed at K university in the course of 10 sessions as following stages; tinkering, providing a special lecture for motivation, finding issues, empathizing, making, sharing and reflecting. A total of 15 students in 5 teams participated in the program, progressed through each stage in the process of solving the problems they found around them so that their neighbors and the creative world could become better. As a result of operating this program, the participants became concerned about their neighbors and community and reflected on the change of perspective of the world from a Christian worldview. As a suggestion for follow-up research and projects, to develop a model of maker education based on design thinking for cultivating a Christian view of the world is proposed in order to support to easy design and management of the program even if there is a lack of professional related knowledge and experience. In addition, it is needed to develop a manual and guide book including a facilitator's role and an assessment tool like a rubric that can give feedback on the performance of the program and make improvement.