• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.2
• /
• pp.76-81
• /
• 2019

It becomes easy to acquire operating qualification of remote control tower crane and illegal retrofits is increased, remote control tower crane models are increasingly being used in smaller construction sites. However, as the problems caused by tower crane operators who have shortages of operating experience grow, safety accidents is increasing and worker is exposed to risk of accident. In this study, the cause of the accident was derived by analyzing the cause of the remote control tower crane accident. And then, the significance of accident causes was analyzed by AHP technique. The result of this study is that tower crane operators and construction workers do not comply with work rules.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.90-95
• /
• 2012

To prevent similar accidents with the basis of industrial accidents already occurred in industrial plants, it would be possible only after true causes are grasped. Unfortunately, however, most accident investigation carried out with the basis of legal regulation failed to grasp them so that similar accidents have been repeated without cease. This research aimed to find out differences between results from conventional accident investigation and those from human error analysis, and to draw out effective and practical counter-plans against industrial accidents occurred repeatedly in an autoglass manufacturing company. As for analysis, about 110 accident cases that occurred for last 7 years were collected, and by adopting the Comprehensive Human Error Analysis Technique developed by the previous researchers, not direct causes but basic fundamental causes that might induce workers to human errors were sought. In consequence, the result showed that facility factors or environmental factors such as improper layout, mistakes in engineering design, and malfunction of interlock system were authentic major accident causes as opposed to managerial factors such as personal carelessness or failure to wearing personal protective equipments, and/or improper work methods.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.55-62
• /
• 2014

During five years (Year 2009~2013), Total victims of 72 %(81,560 people) and those 50.6 %(1,258 people) of death accident occurs in small scale construction site which operate 2 million USD less construction budget. Especially, falling death accident account for 785 people, in the share of 33.2 %(261 people) death disaster takes due to defect of original cause materials. The major safety issues in small scale work place take place while scaffold installation, disassembling, work-plate improper installation or non-professional skills of workers. Furthermore, labor subcontract systems make small construction site shortage of resources. Those workers regard work-plate as unnecessary and consumables supplies. Because of that most of workers use unsafe workplace in most construction site. Therefore, in order to prevent falling accident occurring in small scale work site, government should organize related regulations such as "Work site safety construction method" and then expands education support, financial aid, and sourcing safety supplies for work plate which offer broad variety experiences. Also, introduce certificate solutions for various work plates to improve safety function such as anchoring type method and anti sliding function.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.2 s.17
• /
• pp.1-11
• /
• 2006

This paper addresses a GIS (Geographic Information System) based system in order to reduce the rate of public transportation accidents occurring in Iranian roads network. Over the years, the road accidents are a major issue throughout the world. Today, particular consideration is given to those technologies which can lead to diminish on the number of critical incidents. One of the main factors resulting in accidents and fatalities rates growth is the speed violation of buses in Iranian road network. The conventional speed controlling approach in Iran based on the Tachograph which records vehicle's speed, time, and stoppage in the mechanical processing has many problems. Hence, this research is intended to design and implement a GIS-based system to manage road accident of Bus transportation system using offline tracking system. This was accomplished using a GIS-based technique that encompasses three steps. The first step is developing a GIS-based accident system. The second step includes designing and applying a tracking system inside 90 buses for recording Bus information for speed controlling. Lastly, by using mentioned system in police center, the illegal drivers' punishment would be considered properly. Overall, this system has been successfully applied in this work. Therefore, the police and transportation office are able to control and make policy to diminish the number of accident. It is anticipated that online tracking system through the Web GIS would be utilized In this system in the near future.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.819-828
• /
• 2009

This paper suggests to standardize railway accident restoration types as the code and standard operation system for efficient railway accident management. First of all, the damage types of have been carefully analyzed and reclassified. This study suggested the combination of 3 distinct code factors: restoration class, restoration object, and restoration location to standardize them. In addition, this study suggested procedures to make the standard operation system of emergency restoration, defined the worst case of emergency restoration and the important events. Therefore, the standard operation system of emergency restoration is developed. It shall play a major role as the database system for railway accident management, minimum of damage and rapid control of accident.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.240-241
• /
• 2019

Construction disasters have more distinctive characteristics than other industrial disasters. Since it is likely that construction disasters will spread to severe accidents, the accident mortality rate is very high compared to the disaster incidence rate. Therefore, the purpose of this study is to compare and analyze the operation status of construction risk assessment by domestic large and medium sized construction companies to prepare improvement direction of risk assessment system. The survey results for safety management experts of construction companies are as follows: Large companies have developed and utilized risk assessment systems in their respective companies, while small and medium construction companies have developed and evaluated risk factors through the Excel program. Rather than performing risk assessment tasks based on historical safety accident data, construction companies have limitations in developing risk factors and preparing solutions with suppliers for each major construction. Therefore, it is necessary to prepare a risk assessment system in the future by analyzing the types of safety accidents, such as the safety accident data of each company as well as the safety accident data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.785-788
• /
• 2014

Even though Korea is No.1 shipbuilding country around the world, there have been a lot of accident and man-made calamity incurring in shipyards these days. Therefore most of Korea major shipyard and mid-small size shipyard deeply agonize about safety management countermeasure. As a result of it, many shipyards pour their effort on developing man watching system, PF wireless communication system, portable measuring system to prevent from accident such as fire, suffocation incurring. In this paper, analyze conventional accident & man-made calamity preventing system adopted by most of shipyard and enable the user to watch accident for 24 hours and notify it to user when it is incurring through state of the art ICT technology. And as a result of it the user can prevent the accident and man-made calamity at the beginning.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.3
• /
• pp.29-40
• /
• 2007

The state and its proper countermeasures of unreported industrial accidents in Gyungbuk area was investigated throughout a survey research. The goal of the study was to identify major factors that affect the number and causes of unreported accidents. Results from the survey indicated that significant number of unreported accidents exists especially in the small and medium sized industries. Types of the accidents, amount of increase in the insurance cost and level of the governmental enforcement due to the accidents were the major factors for deciding whether to report or not. These results suggested more compromising actions have to be taken by the government for revealing the present but unreported industrial accidents. A more efficient way for preventing the industrial accidents can be considered on the basis of true understanding about real industrial accident statistics.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.87-98
• /
• 2011

In this study, we investigated and identified criterial human factors(errors), most of which lead to terrible ship accidents such as collisions, sinking, fire and explosions resulting both in human lives and physical damages to ships as well as surrounding environments. To this end, we went through the accident reports of 413 cases over 2005~2009 period and classified the human factors into 6 major factors with 19 sub ones which were constructed in hierarchical order. The relative importance of major factors was calculated and among others the lack of awareness turned out to be the most important factor with the weight of 0.391. The contributions of the results in the research are two fold: it will help (i) identify the root causes of ship accidents and prevent further potential ship related incidents, (ii) analyze the degree of the risk associated with the ship accidents, when risk analysis is performed.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.155-163
• /
• 2003

The intensity of industrial accidents has been increased while the number of industrial accidents has been decreased in theses days. It represents that we need safety guidelines based on personal attributes as well as physical attributes. This study tries to identify major causative factors for industrial accidents and to suggest an evaluation model based on personal attributes. Specifically, relationship between self-efficacy belief associated with industrial safety and other relative personal attributes has been analyzed. First, FGI(Focus Group Interview) was conducted to identify important personal attributes of industrial accidents. The questionnaire was prepared based on the results of FGI and was applied to identifying personal attributes. The relationship between personal attributes identified in this study and self-efficacy belief was assessed using fuzzy logic and fault tree analysis. The results of the assessment showed that self-efficacy belief was closely associated with industrial accidents. Specifically, workers with accident experience had higher level of self-efficacy beliefs than workers without accident experience.