• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.763-768
• /
• 2013

The simulation investigation on the availability with failure density function of major equipment for a sewage treatment plant has been carried out. This study focuses on the availability of the plant and criticality with equipment module induced by component layout and its failure function. The equipment classification of sewage treatment plant and its failure function are established. Also solution methodologies are introduced as Monte-Carlo simulation method and event algorithm for uncertainty problem. The availability in the case of serial connection of equipment with all exponential function is calculated as around 50.4%. In other case of parallel combination with back up equipment, the availability showed over 80.1%. The criticality that a ffects availability showed high value over 77% in the dehydration and concentration process of sludge.

• Korean Journal of Community Nutrition
• /
• v.13 no.4
• /
• pp.520-530
• /
• 2008

The purpose of this study was to investigate the characteristics of the foodservice management practices, the equipment ratio of sanitary facility/equipment, and dietitians' perceptions of (i) the barriers to sanitary management and (ii) the sanitary management performance level in the welfare institutions for the disabled in Korea. The survey was conducted during the period from September 7 to October 15, 2006. A total of 91 institutions(response rate 74.6%) were analyzed by using SPSS(windows ver. 14.0). The average number of meals served per day per an institution was 379. The majority(93.4%) of dietitians made decisions in procurement. The major part of the purchase was made through private contract. The factors affecting menu planning were nutrition, food preference, and cost, in the order of importance. Among the food items, fruits were infrequently served, while protein source foods and green leaf vegetables were almost daily served. The equipment ratio of sanitary facilities/equipment was 45%, which was relatively low. Most dietitians perceived 'limited availability of facilities and equipment' and 'the lack of support from financing department' as the major barriers in implementing a desirable sanitary system. Sanitary management performance in 'the food ingredient' was perceived as the lowest, while that in 'the uniform' showed the highest. The results of this study suggest that a proper supporting program on securing the facility/equipment and adequately trained employees are needed for successful sanitary management. Also, a more frequent supply of fruits for the disabled is recommended.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.1
• /
• pp.69-75
• /
• 2023

In Korea, most nuclear power plants were designed based on the design response spectrum of Regulatory Guide 1.60 of the NRC. However, in the case of earthquakes occurring in the country, the characteristics of seismic motions in Korea and the design response spectrum differed. The seismic motion in Korea had a higher spectral acceleration in the high-frequency range compared to the design response spectrum. The seismic capacity may be reduced when evaluating the seismic performance of the equipment with high-frequency earthquakes compared with what is evaluated by the design response spectrum for the equipment with a high natural frequency. Therefore, EPRI proposed the inelastic energy absorption factor for the equipment anchorage. In this study, the seismic performance of welding anchorage was evaluated by considering domestic seismic characteristics and EPRI's inelastic energy absorption factor. In order to reflect the characteristics of domestic earthquakes, the uniform hazard response spectrum (UHRS) of Uljin was used. Moreover, the seismic performance of the equipment was evaluated with a design response spectrum of R.G.1.60 and a uniform hazard response spectrum (UHRS) as seismic inputs. As a result, it was confirmed that the seismic performance of the weld anchorage could be increased when the inelastic energy absorption factor is used. Also, a comparative analysis was performed on the seismic capacity of the anchorage of equipment by the welding and the extended bolt.

• Korean journal of food and cookery science
• /
• v.13 no.2
• /
• pp.113-123
• /
• 1997

Conventional foodservice system has been the most prevalent system across the country. However, all the elementary students throughout the country is not being provided with school lunch program because of the restriction on equipping school foodservice facilities. So commissary foodservice system was introduced to school lunch program in 1991. This study was designed to evaluate condition of existing major equipment including volume, probable useful life, and frequency of use and determine equipment improvements on conventional and commissary school foodservice systems. A questionnaire was developed and mailed to 87 dietians of conventional and 46 dietians of commissary school foodservices in Kyunggi-do. Response rates were 89.1% and 91.3%, respectively . Approximately one third of commissary foodservices were converted from conventional to commissary. Only 52.6% of conventional and 53.5% of commissary foodservice facilities/equipments have been desirable in quality and quantity. Capacity, functional ability, using frequency, and relationship with efficient work management were analyzed according to school foodservice system. Content analysis was conducted regarding to dietitians' opinions on foodservice facilities/equipment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.483-488
• /
• 2008

The exhaust system, including a muffler, is one of the major sources to generate the radiated noise of construction equipment. In general, the muffler is applied to construction equipment in order to reduce the exhaust noise. Sometimes, however, the higher exhaust noise can be experienced due to the flow effect inside a muffler. So, it is required to consider the flow effect to reduce the exhaust noise level of construction equipment. In this paper, various tests were performed to calculate the flow noise effect inside a muffler. Through a series of tests with respect to a variety of design parameters, a new design program for low noise muffler was developed and applied to reduce the exhaust noise of the construction equipments. These results make it possible to understand the dynamic characteristics of the flow noise and to design the low noise muffler for the construction equipments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.802-805
• /
• 2007

The exhaust system, including a muffler, is one of the major sources to generate the radiated noise of construction equipment. The muffler is generally known that it reduces the exhaust noise level, but it sometimes increases the noise level because of the flow effect inside a muffler. So, it is required to consider the flow effect inside a muffler to reduce the exhaust noise level of construction equipment. In this paper, an experimental method to consider a quantitative flow effect inside a muffler was set up through a series of tests. Finally, the experimental result was verified through the flow noise analysis using CFD analysis result. These results make it possible to understand the dynamic characteristics of the flow noise and to design the low noise muffler for the construction equipment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.4 s.121
• /
• pp.317-323
• /
• 2007

Non-contact underwater explosions against surface ships could cause extensive equipment damage and render the ship inoperative. As an analytical method, DDAM(dynamic design and analysis method) is used for ship shock design. In this paper, in order to verify the finite element model of large shipboard equipment, modal test of equipment was performed. Major objective of this paper is to describe shock analysis methodology for large shipboard equipment attacked to the top and bottom foundations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.35-36
• /
• 2018

According to the nation's greenhouse gas emission statistics, greenhouse gas emissions have been stiffly increasing. Accordingly, the importance of CO₂ reduction is more getting focused over the world. This trend makes the construction equipment be considered as a major target of reduction due to the large volume of emission. This study suggests the feasible methodology for estimating CO₂ emission from construction equipment and for being easily applied on the job sites. The methodology is based on the collection from the segmented CO₂ emission information of construction equipment. This study allows site personnels to estimate the total amount of CO₂ and to take appropriate actions for reasching the environmental regulations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.100-101
• /
• 2018

Environmental problems caused by air pollution have been considered as serious critical issues in global perspectives. Controlling greenhouse gases has become one of the major environmental problems in construction fields as well. However, similar studies were mainly focused on suggestion of various methodologies for measuring CO₂ emissions of construction equipment and calculating emissions. This study aims to analyze the correlation between the CO₂ emissions and RPMs of equipment by the construction process based on row data collected from construction equipment actually operated in job sites. This study allows site personnels to determine the amount of emitted CO₂ under particular construction equipment under specific conditions during the targeted construction operations. The research findings expect to be used as fundamental informations for establishing environment-friendly construction operation planning.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.537-539
• /
• 2015

considerate operation is a major issue in the equipment-intensive operation. Identifying an optimal equipment combination is important to achieve low-energy operations. An Earthwork operation planning system, which measures the energy consumption of construction operations by taking into account construction equipments' engineering attributes (e.g., weight, capacity, energy consumption rate, etc.) and operation conditions (e.g., road condition, attributes of materials to be moved, geometric information, etc.), is essential to achieve the low-energy consumption. This study develops an automated computerized system which identifies an optimal earthmoving equipment fleet minimizing the energy consumption. The system imports a standard template of earthmoving operation model and compares numerous scenarios using alternative equipment allocation plans. It finds the fleet that minimizes the energy consumption by enumerating all cases using sensitivity analysis. A case study is presented to verify the validity of the system.