• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.643-648
• /
• 2014

세일링 요트 (sailing yacht)는 세일 (sail)의 양력을 주로 이용하여 추진력을 얻는다. 요트 경주에서와 같이 항주 속도가 중요한 문제에서는 세일의 성능이 좋을수록 빠른 속도를 낼 수 있기 때문에 세일 주변의 유동해석을 통한 성능 추정과 효율의 최적화는 매우 중요하다. 본 논문에서는 일반적인 경주요트의 형태로써 지브 세일 (jib sail)과 메인 세일 (main sail) 그리고 한 개의 마스트(mast)로 구성된 슬루프(sloop)형 요트에 대한 유동해석을 하였다. 풍상범주 상태에서의 30ft급 세일링 요트인 KORDY-30의 jib sail과 main sail의 높이에 따른 단면을 모델링하였다. 슬루프형 요트의 경우, 세일링 요트에서 jib sail과 main sail이 각각 단독으로 있는 형태의 요트보다 세일의 개수가 증가함에 따라 양력이 증가하지만 항력도 따라서 증가 할 것이라고 가정했다. 따라서 jib sail의 각도를 다양하게 변화시켜 양력계수와, 항력계수의 변화를 살펴보고 그에 따른 양항비의 분석을 통해 최적의 효율을 갖는 jib sail의 각도를 알아보았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1788-1791
• /
• 1997

In this paper constant-level luffing and time optimal control of a JIB crane is investigated. The crane is assumed to have only the derricking motion. the analysis of plance kinematics provides the relationship between the boom angle and the main hosit motor angle for constant-level luffing. The dynamic equations for the crane are very nonlimear, and therefore they are linearized for the application of the linear control theory. The time optimal control in the perspective of no-sway at the end of boom stroke is investigated.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.24-33
• /
• 2005

It is important to understand the flow characteristics around two sails of a sloop yacht. In this paper a computational aerodynamic investigation is performed over sail-like airfoils similar to the main and iIb sails of a 30 feet sailing yacht. Lift and drag are calculated for various conditions of slit distance between the two sails and overlapped length of the jib sail. The thrust and CE(center of effort) of the sail system are obtained. It is found that the combination of two sails produces the thrust force larger than the sum of the thrust force of each sail standing separately and the slit distance of the two sails are important factor to increase lift force.

• 한국해양공학회지
• /
• 제19권1호
• /
• pp.87-94
• /
• 2005

This paper investigates the constant-level luffing and time optimal control of jib cranes. The constant-level luffing, which is the sustainment of the load at a constant height during luffing, is achieved by analyzing the kinematic relationship between the angular displacement of a boom and that of the main hoist motor of a jib crane. Under the assumption that the main body of the crane does not rotate, the equations of motion of the boom are derived using Newton's Second Law. The dynamic equations for the crane system are highly nonlinear; therefore, they are linearized under the small angular motion of the load to apply linear control theory. This paper investigates the time optimal control from the perspective of no-sway at a target point. A stepped velocity pattern is used to design the moving path of the jib crane. Simulation results demonstrate the effectiveness of the time optimal control, in terms of anti-sway motion of the load, while luffing the crane.

• 자동차안전학회지
• /
• 제13권2호
• /
• pp.50-56
• /
• 2021

The purpose of this study is to investigate vulnerable parts of tower crane structures by analyzing extensive non-destructive test data. Approximately ten percent of domestically registered tower cranes were inspected by using magnetic particle inspection. The testing was carried out as advised in KS B 0213. The non-destructive results was analyzed with respect to jib types, age and crane size. As a result, the number of crack occurrences were the largest in mast parts, followed by main jib part. Moreover, it was found that turntables were important parts deserved to be noticed at the perspective of safe maintenance.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.64-73
• /
• 2007

Turbulent flows around yacht sails were calculated to access the applicability of CFD for yacht design. Multi-block grid system was generated by using Gridgen package and Fluent was used to calculate flows around two sail system. A 30ft class sailing yacht designed and tested by KRISO was chosen. The interference effect between main and jib sails was analyzed. Pressure distribution on the sails was obtained and the center of effort was estimated. It was found that the jib angle affects the flow phenomena around a main sail due to the change of inflow angle. The location of center of effort is much different from the empirical formula based on a simple geometrical consideration. The calculated results are compared with the previous numerical and experimental results. Both CFD results are similar, but there are some discrepancies with experimental data. However, it is certain that CFD can be a very useful tool for yacht design.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.431-439
• /
• 2006

Due to the limitation of size of the test section, blockage effects could not be avoided in the model test of yacht sails for common wind tunnels. In this paper, a numerical analysis is performed to investigate the blockage effects on the lift and drag forces measured from wind tunnel experiments for a 30 feet sloop yacht sail. Complex airflows around the jib and main sails including three-dimensional flow separations are calculated for various close-hauled conditions. It is found that the blockage of a wind tunnel changes the flow separation and consequently the lift and drag forces of the sails, especially the main sail, reduce and increase, respectively, due to the blockage effects.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.433-437
• /
• 2004

A provision crane is generally installed on the upper deck to the rear of the accommodation of the ship in order to load and unload engine part or something heavy. There are two types of provision cranes: one is jib-type and the other is monorail-type. So the natural frequency of the jib-type crane equipment is low, therefore, there are some possibility of resonance between crane structure and the main excitation sources of the ship in normal operating range. This study describe a vibration reduction technique for provision crane by applying a proper countermeasure through finite element analysis and modal test. In order to find out weak point in design of provision crane, a sensitive analysis has been performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.307-309
• /
• 2002

This paper proposes an expert system, which is able to determine the problem-solving strategy for diversity events occurred on the distribution system. The events include events related to the fault, scheduled outage and optimal operating task such as feeder line fault, line scheduled outage, line overload, system load balancing, system loss minimization, main transformer fault, main transformer scheduled outage, main transformer overload, main transformer protection control. The expert system enhances the reliability of software designed by the integrated concept for the diversity events.

• 대한건축학회논문집:계획계
• /
• 제34권5호
• /
• pp.79-88
• /
• 2018

The purpose of this study is to analyze the plan type of excavation remains during the Mid to Late Joseon period around Jong-ro area in Seoul. 523 building remains were selected in accordance with plan type could identified through the excavation investigation report. Among these, 276 building remains were verified to the $15-16^{th}$, 145 and 102 building were verified to the 17-18th and the $19^{th}$ century. By classifying excavation remains, four dominant plan type of the each century came out. First, -shape was the most common plan type took nearly 50 percent. In a considerable proportion of cases, this plan type seems an annex of main building. However, -shape plan type also seemed to be used for main building in some cases. ㄱ and ㄷshape plan type took the second and the third. In most cases, these types seemed typical plan used for a main housing building. For the last, ㅁshape plan type identified the most unusual. This plan type merely took under five percent but, these cases are meaningful because it shows the plan alteration from ㄷshape to ㅁshape plan type. Existence proportion between each plan types of the $15-16^{th}$ century were continued to the $18-19^{th}$century without small changes between -and ㄱ types in $17-18^h$ century. By examining selected excavation remains, installing front Toi space on ㄱ, ㄷ and ㅁshape plan type stand out clearly compared with -shape plan type. From this tendency, it could be considered that plan type became a significant factor influenced installing Toi space. Similar to periodical tendency of plan type was not changed dramatically, the rate of installing Toi space in the $15-16^{th}$ century was not changed much until the $18-19^{th}$ century. It also shows the close relation between plan type and installing Toi space. In some excavation remains, floor type in the $15-16^{th}$ century also verified. There are some points of similarities on installing typical location of On-dol, Ma-ru and Bu-eok in these excavation remains with later period housing type such as Ut-Bang-Gguk-Oem-Jib and Ddeul-Jib.