Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

Anti-Sway Control of a Jib Crane Using Time Optimal Control

시간최적제어를 이용한 지비크레인의 흔들림제어

  • KANG MIN-WOO (Department of Mechanical and Intelligent Systems Engineering, Pusan National University) ;
  • HONG KEUM-SHIK (School of Mechanical Engineering, Pusan National University)
  • 강민우 (부산대학교 지능기계공학과) ;
  • 홍금식 (부산대학교 기계공학부)
  • Published : 2005.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper investigates the constant-level luffing and time optimal control of jib cranes. The constant-level luffing, which is the sustainment of the load at a constant height during luffing, is achieved by analyzing the kinematic relationship between the angular displacement of a boom and that of the main hoist motor of a jib crane. Under the assumption that the main body of the crane does not rotate, the equations of motion of the boom are derived using Newton's Second Law. The dynamic equations for the crane system are highly nonlinear; therefore, they are linearized under the small angular motion of the load to apply linear control theory. This paper investigates the time optimal control from the perspective of no-sway at a target point. A stepped velocity pattern is used to design the moving path of the jib crane. Simulation results demonstrate the effectiveness of the time optimal control, in terms of anti-sway motion of the load, while luffing the crane.

Keywords

References

  1. 김영복 (2001). 'Gain-Scheduling 기법을 이용한 크레인의 흔들림제어에 관한 연구', 한국정밀공학회지, 제18권, 제7호, pp 53-64
  2. 박찬훈, 박경택, 김두형 (2000). '보조로프를 이용한 겐트리크레인의 흔들림제어에 관한 연구', 한국정밀공학회 춘계학술 대회논문집, pp 343-346
  3. 손유식, 김영복 (2000). '컨테이너 크레인의 흔들림 방지장치 개발에 관한 연구', 한국해양공학회지 제14권, 제4호, pp 35-42
  4. 신선근, 최재준, 소명옥 (2000) '하역효율 향상을 위한 컨테이너 크레인의 제어기 설계', 한국박용기관학회지, 제24권, 제4호, pp 502-508
  5. 이종규, 이상룡 (2000). '비선형 천정 크레인시스템의 위치제어 알고리즘 개발', 한국정밀공학회지, 제17권, 제4호, pp 142-147
  6. 이진우, 여태경, 안휘웅, 김상봉 (1998). '2자유도 서보제어기를 이용한 크레인의 Anti-Sway 제어', 한국해양공학회지, 제 12권, 제4호, pp 17-23
  7. 최경배, 홍금식, 이만형 (1997). 'JIB 크레인의 Constant-Level Luffing과 시간최적제어', 한국자동제어학술회의 논문집, pp 1788-1791
  8. 홍금식, 손성철, 이만형 (1997a). '컨테이너 크레인의 흔들림제어 (part I): 모델링, 제어전략, 기준:선도를 통한 오차 피이드백 제어', 제어.자동화.시스템공학논문지, 제3권 제1호, pp 23-31
  9. 홍금식, 손성철, 이만형 (1997b). '컨테이너 크레인의 흔들림 제어 ( part II): 트롤리 주행속도 조절을 통한 진자운동의 제어', 제어.자동화.시스템공학논문지, 제3권, 제2호, pp 132-138
  10. 홍금식 (1999). '컨테이너 기중기의 제어: 수정된 시간최적주행과 비선형 잔류흔들림 제어', 제어.자동화.시스템공학논문지, 제5권, 제5호, pp 630-639
  11. Agostini, M.J., Parker, G.G., Schaub, H, Groom, K. and Robinett, R,D. (2003). 'Generating Swing-Suppressed Maneuvers for Crane Systems With Rate Saturation', IEEE Transactions on Control Systems Technology, Vol 11, No 4, pp 471-481 https://doi.org/10.1109/TCST.2003.813402
  12. Auernig, J.W. and Troger, H. (1987). 'Time Optimal Control of Overhead Cranes with Hoisting of the Load', Automatica, Vol 23, No 4, pp 437-446 https://doi.org/10.1016/0005-1098(87)90073-2
  13. Hong, K.S., Park, B.J. and Lee, M.H. (2000). 'Two-Stage Control of Container Cranes', JSME International Journal, Series C, Vol 43, No 2, pp 273-282 https://doi.org/10.1299/jsmec.43.273
  14. Hong, K.T., Huh, C.D., and Hong, K.S. (2003). 'Command Shaping Control for Limiting the Transient Sway Angle of Crane Systems', International Journal of Control, Automation, and Systems, Vol 1, No 1, pp 43-53
  15. Kirk, D.E. (1970). Optimal Control Theory: an Introduction, Prentice Hall, Englewood Cliffs, NJ
  16. Sakawa, Y. and Shindo, Y. (1982). 'Optimal Control of Container Cranes', Automatica, Vol 18, No 3, pp 257-266 https://doi.org/10.1016/0005-1098(82)90086-3
  17. Sakawa, Y. and Nakazumi A. (1985). 'Modeling and Control of a Rotary Crane', ASME Journal of Dynamic Systems, Measurement, and Control, Vol 107, pp 200-205 https://doi.org/10.1115/1.3140721
  18. Singhose, W., Porter, L., Kenison, M. and Kriikku. E. (2000). 'Effects of Hoisting on the Input Shaping Control of Gantry Cranes', Control Engineering Practice, Vol 8, No 10, pp 1159-1165 https://doi.org/10.1016/S0967-0661(00)00054-X
  19. Takagi, K. and Nishimura, H. (2003). 'Control of a Jib-Type Crane Mounted on a Flexible Structure', IEEE Transactions on Control Systems Technology, Vol 11, No 1, pp 32-42 https://doi.org/10.1109/TCST.2002.806435