• 천문학회지
• /
• 제53권6호
• /
• pp.149-159
• /
• 2020

Gravitational lensing of point sources located inside the lens caustic is known to produce four images in a configuration closely related to the source position. We study this relation in the particular case of a sample of quadruply-imaged quasars observed by the Hubble Space Telescope. Strong correlations between the parameters defining the image configuration are revealed. The relation between the image configuration and the source position is studied. Some simple features of the selected data sample are exposed and commented upon. In particular, evidence is found for the selected sample to be biased in favor of large magnification systems. While having no direct impact on practical analyses of specific systems, our results have pedagogical value and deepen our understanding of the mechanism of gravitational lensing.

• 한국광학회지
• /
• 제1권1호
• /
• pp.12-15
• /
• 1990

홀로그래피 간섭법과 스펙클 사진법을 결합한 홀로스펙클 간섭법을 이용하여 3차원 변형을 측정하였다. 이 방법은 이중노출된 하나의 사진건판으로부터 종변위와 횡변위를 모두 알아낼 수 있어 3차원 변형측정에 매우 유용하게 사용되고 있다. 본 연구에서는 물체의 일부분에 밀집되어 일어나는 변형을 측정하기 위하여 image holography에 기초를 둔 광학시스템을 구성하였다. 시스템의 배율을 적절히 증가시키고 기준파의 세기를 감소시킴으로써 보통의 홀로그램에 비해 스펙클의 효과를 증대시켰다. 이로써 가시도가 높은 Young의 무늬 뿐만 아니라 확대되고 명확한 홀로 그래피 간섭무늬를 얻을 수 있어 indentor에 의한 3차원 접촉변형을 측정하였다.

• 한국멀티미디어학회논문지
• /
• 제16권7호
• /
• pp.852-861
• /
• 2013

의료영상을 이용한 볼륨가시화를 수행할 때, 사용자가 관심있는 영역을 확대 관찰하는 일은 빈번하게 발생한다. 확대 영상에서 나뭇결 결함으로 불리는 문제가 발생하기 때문에, 기존 연구는 교란 샘플링을 이용하여 문제를 해결하였다. 그러나 교란 샘플링 방법은 관찰 영역 경계에서 잡음이 발생하는 문제가 있다. 본 연구는 교란 샘플링 시 경계에서 발생하는 잡음의 원인을 설명하고 그 해결 방법을 제시한다. 잡음 없이 나뭇결 결함을 제거하기 위해, 본 연구는 빈공간교란 기법과 샘플링 위치 정렬 기법을 제안한다. 제안 방법을 통해, 추가 시간 없이 고화질 볼륨가시화 영상을 생성할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.690-695
• /
• 2004

A new dimension measuring method for the measurement of diameter of an object has been developed using laser triangulation. The 3-D data of an object was calculated from the 2dimensional image information obtained by the laser stripe using the laser triangulation. The system can measure the diameter of hole not only in a normal plane but also in an incline plane. We can experiment with magnification that is optimized according to size of object using zoom lens. In this paper, the theoretical formula and calibration of the system were described. The measuring precision of the system was investigated by experiment.

• Journal of the Optical Society of Korea
• /
• 제19권2호
• /
• pp.165-168
• /
• 2015

A simple method to determine the focal length of a lens using the Talbot image is presented. This method uses only one grating, requiring neither Moir$\acute{e}$ fringe analysis nor the angle between the gratings. The original Fourier transform was used to access the spectrum beyond the limitation set of the usual fast Fourier transform to determine the (de)magnification accurately enough to be used for the focal length. A set of Talbot images simulated numerically with the Fresnel diffraction integral was used to demonstrate the method. For focal lengths between 5550 mm and 5650 mm, the mean difference between the focal lengths determined from the Talbot images and the true values was 3.3 mm with the standard deviation of the difference being 3.8 mm. The true focal lengths can be recovered with an accuracy of 0.06%.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.49-55
• /
• 2000

The semiconductor industry relies on digital optical imaging for the overlay metrology of integrated circuit patterns. One critical performance demand in the particular application of digital imaging is placed on the edge resolution that is defined as the smallest detectable displacement of an edge from its image acquired in digital from. As the critical feature size of integrated circuit patterns reaches below 0.35 micrometers, the edge resolution is required to be less than 0.01 micrometers. This requirement is so stringent that fundamental behaviors of digital optical imaging need to be explored especially for the precision coordinate metrology. Our investigation reveals that the edge resolution shows quasi-random characteristics, not being simply deduced from relevant opto-electronic system parameters. Hence, a stochastic upper bound analysis is made to come up with the worst edge resolution that can statistically well predict actual indeterminate edge resolutions obtained with high magnification microscope objectives.

• 대한기계학회논문집B
• /
• 제33권8호
• /
• pp.589-595
• /
• 2009

The instability wave formed near nozzle region grows to vortex with large scale in downstream region of spray. It plays an important role in the fuel-air mixing, combustion process and engine exhaust emissions in direct injection diesel engine. The objective of this study is to analyze effect of variant parameters (injection pressure, ambient gas density, etc.) and fuel properties on spray instability near nozzle region. Spray structure near nozzle region was investigated using a magnification photograph. A pulsed Nd-YAG laser was used as a light source, and image was taken by CCD camera. The following conclusions are drawn from this experimental analysis. In low ambient density, the effect of fuel properties on spray instability near nozzle region is dominant. In high ambient density, the effect of ambient gas on spray instability near nozzle region is dominant. High jet velocity has strong influence on spray instability.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.209-212
• /
• 2010

본 논문에서는 영상을 확대할 경우에 발생하는 영상의 품질 저하를 최소화하기 위하여 원본 영상 픽셀과 확대된 결과 영상 픽셀 간의 명암도 차이와 보간 수행시 적용되는 가중치 값을 퍼지 기법에 적용하여 영상을 확대하는 방법을 제안한다. 제안된 방법은 기존의 양선형 보간법으로 도출된 결과 영상 픽셀과 원본 영상 픽셀 간의 명암도 차이와 보간 수행시 네 개의 픽셀 값에 곱하게 되는 가중치 값을 퍼지 소속 함수에 적용하여 원본 영상의 픽셀 정보와 가장 근접한 특징을 가진 확대된 결과 영상의 픽셀 정보를 최종적으로 도출한다. 제안된 방법을 실험한 결과, 기존의 양선형 보간법에 비해 영상 확대시, 발생하는 문제점인 흐림 현상이 상대적으로 감소하여 영상의 품질이 개선되는 것을 확인하였다.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.96-100
• /
• 2007

Condenser lens and objective lens are used to demagnify the image of the crossover to the final spot size. In lens, electrons are focused by magnetic fields. This fields is fringing field. It is important in electron focusing. Electron focusing occurs the radial component field and axial component field. Radial component produces rotational force and axial component produces radial force. Radial force causes the electron's trajectory to curve toward the optic axis and corss it. Focal length decreases as the current of lens increases. In this paper, we use the focal length for desiging the hardware of lens current control and present the results.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.513-518
• /
• 2000

Surface roughness is one of the most important parameters to estimate quality of products. As this reason. so many studies were carried out through various attempts that were contact or non-contact using computer vision. Even though these efforts, there were few good results in this research. However, texture analysis is making a important role to solve these problems in various fields including universe, aviatiion, living thing and fibers. In this study, texture parameter was obtained by means of position operator according to variation of angle direction and distance. As a result, it was found that surface texture was more effected by direction then distance