• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 동계학술연구발표회 및 2차 아시안포럼
• /
• pp.198-199
• /
• 2005

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권3호
• /
• pp.21-28
• /
• 2005

Superconducting synchronous motors and generators have the field coil composed of superconductor with almost zero resistance at superconducting state. Therefore, copper loss at the conventional field coil is eliminated and the superconducting machine gets higher efficiency. The armature coil of the superconducting machine is composed of copper wire and supported by non-magnetic material such as FRP (Fiber Reinforced Plastic) This paper contains the design Procedure of a 1MW superconducting synchronous motor using high-temperature superconductor only for the field coil. Especially, the armature coil is designed by water-cooling in order to dissipate Joule heat easily. Moreover, 3-dimensional electromagnetic design is conducted to get a proper design result and reduce design errors from 2-dimensional approach.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권2호
• /
• pp.60-65
• /
• 2005

This study tries to analyzes the static friction torque that generated in a micro-electromagnetic clutch by using FEM. For the purpose of design change and optimization of the micro-electromagnetic clutch, the static friction torque prediction is very important. We construct the axi symmetric FEM model for analyze the static friction torque and the real material properties are substituted to the FEM model. For a test, predicted static friction torque is compared with experimental one to discuss the rationality of torque analysis process. The analytical result agrees well to experimental data. explaining the validity of the mathematical process and FEM model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.337-339
• /
• 2001

High speed brushless permanent magnet (PM) machines are a key technology for electric drives and motion control systems for many application, since they are conductive to high efficiency, high power density small size and low weight. Proposed slotless PM machine is constructed without stator winding slots. Its stator magnetic material is in the form of a ring and winding have a toroidal configuration and its rotor consists of a 4-pole Halbach array or radially magnetized PM rotor.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1997년도 추계학술발표회논문집
• /
• pp.70-73
• /
• 1997

This paper describes the technique for detecting failure symptom of mold transformer. This study uses the vibration signal analysis method and FEM as the technique. A loading back method is constructed for experiment, accelation sensors are adhered for measurement of vibration signal. Vibration signal measured by this method is analyzed into variation trend of measurement variables by control of control variables. Magnetic field distribution of molded winding is also acquired by FEM considering the design specfication and the characteristics of insulation material, in conclusion, he relation of results between vibration signal and FEM is studied by these methods.

• 대한전기학회논문지
• /
• 제31권12호
• /
• pp.173-179
• /
• 1982

This paper presents a modified quasi-static approximate solution derived from the Maxwell's equations of integral form for the calculation of magnetic shielding effectiveness in a non-uniform enclosure such as metal-clad high-voltage test laboratory. It also describes the simplified relationship between the electrical parameters applicable to the engineering calculations of electromagnetic absorption loss which comprise the resultant effects due to the welding seams and short-circuited slots as well as the shielding material properties. A numerical example shows the fairly good agreements with experimental results measured on the absorption loss vs. incident wave frequency without any unreasonable rapid increase.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권1호
• /
• pp.19-24
• /
• 2003

Design and test results of a VRAG(Vacuum Rotary Arc Gap) switch were presented. To control the damage of electrodes caused by the vacuum arc, Lorentz's force by the radial magnetic field between spiral electrodes was used to rotate the vacuum uc. VRAG switch electrodes were made of the material of CuCr and OFHC. Gap distance between two spiral type electrodes for the rotation of the arc discharge is 8, 10, 12mm. In the cathode, one trigger electrode was inserted into each spiral wing. Normal operation of the VRAG switch was confirmed with 10.6[$mutextrm{s}$]of trigger delay and 2~3[$mutextrm{s}$] of the jitter time. The speed of the vacuum arc was measured to be 0.6 ~ 1[km/s] by a motion analyzer.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권1호
• /
• pp.93-104
• /
• 1996

연질자성재료는 대부분 직류 및 고주파용 변압기, inductor, 대형 motor, 자기헤드의 자심재료 및 센서등으로 사용되고, 경질자성재료는 주로 motor 및 speaker용으로 사용되며, 자기기록매체재료는 화상, 음성 및 컴퓨터 정보의 기록용으로 사용된다. 특수자성재료로는 microwave용, 전자파 흡수, 열팽창 제어, 기체밀봉등 많은 용도에 이용되고 있다. 최근 국내외에서 수요가 급증하는 첨단 전자기기용 자성재료 시장등이 내구, 내열성 뿐만 아니라 소형화, 경량화 됨에 따라 자성재료의 고성능화를 요구하고 있다. 따라서 본 고에서는 경질자성재료의 개발현황을 살펴보고 자성재료의 고성능화를 위한 연구동향을 생각해 보고자 한다.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.100-104
• /
• 2015

The nickel alloys gets a great deal of attention due to their good mechanical, chemical and magnetic properties. Especially Ni-P alloy systems are very attractive due to their good corrosion resistance and the wear resistance in important technological applications. In this study, the effects of phosphorus acid concentration in plating solution on composition of Ni-P alloy coatings were studied. The Ni-P electrodeposits of the various P contents were investigated in order to understand effect of the composition on mechanical properties of Ni-P electrodeposits. The mechanical properties of electrodeposits increased as the P content in electrodeposits increase. The results of mechanical properties were explained by grain size and P solid solution effect. The effects of heat treatment on mechanical properties of Ni-P alloy coatings were also studied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1442-1443
• /
• 2006

본 논문에서는 분말 연자성체에 플라즈마를 이용하였을 때 특성 개선에 관한 연구이다. 기존의 압분 방식은 낮은 강도를 갖는 단점 때문에 신뢰성에 문제가 있어서, 직접적인 모터분야에 연자성체(SMC)를 적용하는데 큰 문제점 이였다. 그러나 본 논문에서 제안하는 SPS(Spark Plasma sintering)공법을 적용한 모터 코어 제조 방법은 플라즈마를 이용하여 분말의 표면에서만 접촉이 일어나게 하는 소결 방식으로, 내부재질의 특성변화 없이 표면의 절연층끼리만 접촉되게 하여 자기적 특성의 손상없이 기계적인 강도를 높일 수 있었다. 실제적으로 기존의 압분체(Hoganass550+윤활제(KE))의 경우 파단강도가 700Mpa정도였으나 SPS를 적용시 1200Mpa까지 증가 되었다. 이러한 SPS 공법을 통해 연자성체(SMC)재질의 모터 Core 분야 적용하는 데 생기는 문제점을 해결하고자 하였다.