• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2197-2198
• /
• 2006

본 논문은 역률개선 효과가 있는 MERS(Magnetic Enery recovery switch)를 사용하여 에너지 효율에서의 결과를 입증하고자 한다. 전원과 유도성부하에 직렬 연결된 MERS는 Full Bridge와 비슷한 구성으로 전력용 MOSFET(or IGBT) SWITCH 4개와 전해 DC콘덴서 1개로 구성되어진다. MERS의 콘덴서는 부하와 콘덴서의 리액턴스, $X_C<X_L$을 만족하는 콘덴서의 용량을 선택하고 콘덴서에 충전된 전압에 의해 부하의 유도계수를 보상하여 역률을 1로 추종하며 개선된다. 이때 스위치는 전원 전압에 대해 zero-voltage switching 과 zero-current switching을 하게 된다. 만약 부하가 변하더라도 $X_C<X_L$을 만족한다면 자동적으로 역률은 1에 맞추어지게 된다

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.565-566
• /
• 2006

본 논문은 역률개선 효과가 있는 MERS(Magnetic Energy recovery switch)를 사용하여 에너지 효율에서의 결과를 입증하고자 한다. 전원과 유도성부하에 직렬 연결된 MERS는 Full Bridge와 비슷한 성으로 전력용 MOSFET(or IGBT) SWITCH 4개와 전해 DC콘덴서 1개로 성되어진다. MERS의 콘덴서는 부하와 콘덴서의 리액턴스, $X_{c}{<}X_{L}$ 을 만족하는 콘덴서의 용량을 선택하고 콘덴서에 충전된 전압에 의해 부하의 유도계수를 보상하여 역률을 1로 추종하며 개선된다. 이때 스위치는 전원 전압에 대해 zero-voltage switching 과 zero-current switching을 하게 된다. 만약 부하가 변하더라도 $X_{c}{<}X_{L}$을 만족한다면 자동적으로 역률은 1에 맞추어지게 된다

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.2
• /
• pp.17-20
• /
• 2020

Comprehensive utilization of tungsten tailings resources not only solves environmental problems but also creates huge economic benefits. The high content of iron impurity in tungsten tailings will have adverse effect on the downstream comprehensive utilization, whether flotation or pickling. In this paper, the Superconducting High Gradient Magnetic Separation(S-HGMS) is used to remove of Fe impurities from tungsten tailings. The optimal experimental parameters are as follows: background magnetic induction intensity is 3.0T, slurry flow velocity is 500ml/min. The Fe removal rate of Fe was 68.8% and the recovery rate was 59.53%.

• 전기의세계
• /
• v.24 no.1
• /
• pp.29-42
• /
• 1975

In this paper, the electrical angle between two winding axes in the stator of the capacitor motor is put optional angle, deviding the space harmonics in its magnetic field of two windings and the leakage flux into the forward revolving field and the backward one by the revolving-field theory, its equivalent circuit which consider mutual induction between two windings is depicted. In the depicted equivalent circuit, the rotor resistance for the fundamental flux is devided into the resistance for the rotor bar and endring, and the rotor leakage reactance for the fundamental is devided into the skew leadage reactance and the other, and each circuit constants for each harmonics is expressed in terms of the circuit constants for the fundamental, so it mades easy to determine the characteristics for the capacitor motor. As the circuit constant ratios to the magnetizing reactance of the fundamental are used, motors which have same circuit constant ratios should be resembled in their characteristics.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.3
• /
• pp.153-162
• /
• 1987

The purpose of this paper is to analysis and develop theoretically the characteristics of tubular linear induction motor, which is a special industrial motor that generates directly thrust force from electrical power. The Poisson equation about vector potential which is created by the application of Maxwell electromagnetic equation with the speed considered, results in modified Bessel equation by the assumption that is applied to each region of the experimental motor. Vector potential, magnetic flux density, secondary current, and thrust force according to its region respectively were found out by substituting boundary condition for this equation and rearranging. Besides, a attendant materials, that is, thermal characteristic, which is one of the characteristics under the operation of experimental motor each part's magnetic flux distribution characteristics within active zone, the required time for reciprocating motion, and variation of power factor vs. a slip were found.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.168-171
• /
• 2002

A SSIMT(Suppressed Sidewall Injection Magnetotransistor) sensor with high linearity is presented in this thesis. The prototype is fabricated by using the Hynix 0.6$\mu\textrm{m}$ P-substrate twin-well double poly three-metal CMOS Process. The fabricated SSIMT shows that variation of the collector current is extremely linear by varing the magnetic induction from -200mT to 200mT at I$\_$B/=500${\mu}$A, V$\_$CE/=2V and V$\_$SUB/=5V. The relative sensitivity is up to 120%/T. At B = 0, magnetic offset is about 79mT, there relative sensitivity is 30.5%/T. The nonlinearity of the fabricated SSIMT is measured about 1.4%.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.382-384
• /
• 2005

When a hearing aid' s user is listening through telephone or cellular phone, he/she usually suffers from severe electrical magnetic interference noise. It is because hearing aids amplify voice signal as well as background noise. A telecoil, an induction coil, is a possible solution for the problem. Because a telecoil has the characteristic of high pass filter, it has some problem of resulting increased high frequency noise. For solving this problem, we can use a capacitor connected with the telecoil in parallel. According to capacitance, receiving signal quality may change. In this paper, proper capacitor values for the best sound quality are investigated by experimental work.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.551-553
• /
• 2005

When a hearing aid' s user is listening through telephone or cellular phone, he/she usually suffers from severe electrical magnetic interference noise. It is because hearing aids amplify voice signal as well as background noise. A telecoil, an induction coil, is a possible solution for the problem. Because a telecoil has the characteristic of high pass filter, it has some problem of resulting increased high frequency noise. For solving this problem, we can use a capacitor connected with the telecoil in parallel. According to capacitance, receiving signal quality may change. In this paper, proper capacitor values for the best sound quality are investigated by experimental work.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1353-1356
• /
• 2009

As a method obtaining linear thrust force for the magnet wheel producing a strong traction torque, the concept of magnetic shield is suggested and compared with the existing approaches. Specially, as the magnet wheel, in which the permanent magnets rotate mechanically instead of ac driving to make traveling field, is physically similar with the rotary induction motor, there is a periodical force ripple in tangential direction as well as normal direction. But, the force ripple can be suppressed from a shape change of the shield plate. Namely, the change brings out a change of entry and exit effect of the circumferential field for the magnet wheel. The feasibility of the shield concept is verified from simulation and experiment.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.18-20
• /
• 1995

In this paper we presented a calculation method of leakage inductance in electrical machines. For its accurate calculation the finite element method is applied to the analysis of magnetic field distribution. The self and mutual inductances are derived using the results of the magnetic field analysis and the leakage inductance is easily obtained from these inductances. As numerical examples, we tread a single phase transformer and a rotor slot model of induction motor. In the finite element analysis we used the 2D linear magnetostatic formulation with the first-order triangular element.