• Title/Summary/Keyword: MS solution

Search Result 508, Processing Time 0.039 seconds

Effect of Cationization Agent Concentration on Glycan Detection Using MALDI TOF-MS

  • Kim, Inyoung;Shin, Dongwon;Paek, Jihyun;Kim, Jeongkwon
    • Mass Spectrometry Letters
    • /
    • v.8 no.1
    • /
    • pp.14-17
    • /
    • 2017
  • The effect of cationization agent concentration on glycan detection via matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was investigated using $Na^+$ ions in the form of NaCl as the cationization agent. NaCl solution concentrations ranging from 1 mM to 1 M were investigated. Glycans from ovalbumin were mixed with the cationization agent solution and the 2,5-dihydroxybenzoic acid (2,5-DHB) matrix solution in a volume ratio of 1:1:1. The resulting mixture was loaded onto the MALDI plate. Two MALDI-TOF MS instruments (Voyager DE-STR MALDI-TOF MS and Tinkerbell RT MALDI-TOF MS) were used for detection of glycans. The best detection, in terms of the number of identified glycans, the peak intensity, and the signal-to-noise (S/N) ratio, was obtained with NaCl concentrations of 0.01-0.1 M for both MALDI-TOF MS instruments.

Comparative study on the efficiency of pesticide residue removal in foods (Perilla Leaves, Strawberries, Apples)

  • Seung-Woon Myung
    • Analytical Science and Technology
    • /
    • v.37 no.1
    • /
    • pp.1-11
    • /
    • 2024
  • In agricultural households cultivating vegetables and fruits, the use of various pesticides to protect crops from diseases and pests or to control weeds is widely practiced enhancing quality and productivity. However, pesticides can pose a threat to consumer health by remaining on the food surface or migrating into the food interior. Households commonly peel off skins, wash with water, or use chemical methods to remove foreign substances including residual pesticides on the food surface. In this study, we measured the washing rate by comparing the pesticide concentrations before and after washing in the leafy vegetable perilla leaves and the fruits strawberries and apples, which were intentionally exposed to pesticides. We compared washing rates using tap water, a baking soda solution, and a commercially available food-specific cleaning solution. The target pesticides for analysis were azoxystrobin, bifenthrin, boscalid, difenoconazole, flubendiamide, and indoxacarb, and the residual pesticide analysis was performed using GC-MS/MS or LC-MS/MS. The removal rates of pesticides were highest with the food-specific cleaner, followed by baking soda and tap water in order.

Mass production of potato microtubers by bioreactor culture (바이오리액터 배양기에 의한 감자소괴경 대량 생산)

  • Kim, Jae-Whune;Choi, Eun-Gyung;Oh, Seung-Cheol;Joo, Sun-Ah;You, Dong-Min;Kim, Soon-Kap;Kim, Jeong-Kook
    • Journal of Plant Biotechnology
    • /
    • v.37 no.1
    • /
    • pp.110-114
    • /
    • 2010
  • Highest increase of biomass was observed when tissue-cultured potato (Solanum tuberosum L. cv. Chubaek) shoots were cultured in a liquid medium containing 1/3 MS solution in a 18 L bioreactor, as compared to 1/4 and 1/2 MS solution. The medium containing 1/4 MS solution showed higher increase of shoot biomass than one containing 1/2 MS solution. Potato microtubers were formed when the medium was exchanged with the medium for microtuber formation and incubated under dark condition. The microtubers were observed first at some axillary buds one week after incubation under dark condition and then at most of the axillary buds by the end of 3 weeks. The 1.5 MS liquid medium and $20^{\circ}C$ were optimal conditions. By the end of 6 weeks, more 1,000 microtubers were formed in the 18 L bioreactor. Then, greened microtubers were harvested after one week culture under light condition.

Comparison of Dioxin Analytical Results Between SP-2331 and DB-5MS Capillary Columns in the HRGC/HRMS Analysis (HRGC/HRMS에 SP-2331 및 DB-5MS 컬럼 사용시 다이옥신 결과의 비교)

  • Hong, Jongki;Yang, Jeong-Soo;Shin, Jung-Hwa;Ahn, Yun-Gyong;Lee, Dai-Woon
    • Analytical Science and Technology
    • /
    • v.17 no.2
    • /
    • pp.184-191
    • /
    • 2004
  • In this study, the separation of toxic dioxin 2,3,7,8-congeners by DB-5MS and SP-2331 GC columns which are widely used in HRGC/HRMS analysis was examined. Through the dioxin analysis of column performance check standard solution and fly ash sample, the isomer specific separation of 2,3,7,8-substituted dioxins from tetra to hexa-isomers on DB-5MS and SP-2331 columns were studied. The effect of I-TEQ value by these columns was also studied. The total concentrations of toxic dioxins for the column performance check standard solution were 508.4 ng/mL analyzed by DB-5MS and 515.8 ng/mL analyzed by SP-2331, respectively. The I-TEQ value obtained by both columns was shown to be almost equivalent for the column performance check standard solution and fly ash sample.

Effect of the Mixed Treatment of Electrolyzed Micronutrients with Nutrient Solution and SCB Slurry on Mineral Content and Growth of Cherry Tomatoes (Lycopersicon esculentum) (양액과 SCB액비 처리에 미량요소 첨가가 방울토마토의 미네랄 함량과 생육에 미치는 영향)

  • Ryoo, Jong-Won
    • Korean Journal of Organic Agriculture
    • /
    • v.20 no.3
    • /
    • pp.385-397
    • /
    • 2012
  • A pot experiment was carried out to examined the effect of electrolyzed micronutrients (Fe, Mn, Zn, Sr, Se, Sn, Co, Ti, and V) solution treatments with nutrient solution and SCB slurry on the mineral content and growth of tomato in cherry tomato (Lycopersicon esculentum). The treatment of nutrient solution (NS)+micronutrients solution (MS) significantly increased the concentrations of Li, Zn, Sr, Se, Ti as compared with that of NS alone in the cherry tomato fruits, and SCB+MS solution treatment significantly increased Li, Zn, Se, Co, Sr, and Ti contents as compared with SCB treatment. The micronutrient contents of MN+SCB+MS treatment were significantly higher in Li, Zn, Se, Co and in Ti than those of SCB and NS treatment, respectively. The growth and yield of cherry tomato fruits was highest with NS treatment. The yield indices of cherry tomato treated with NS+MS treatment and SCB+NS+MS were 97% and 94% of NS treatment. In conclusion, it seems to be possible to produce micronutrient-fortified cherry tomato by the mixed treatment of electrolyzed micronutrients.

A Study on the Information Exchange Technology Between IEDs Using SOAP in Network Based SA System (네트워크 기반 자동화 변전소에서 SOAP을 이용한 IED간 정보교환 기술 연구)

  • Ko, Yun-Seok
    • Proceedings of the KIEE Conference
    • /
    • 2006.07a
    • /
    • pp.139-140
    • /
    • 2006
  • In this paper, autonomous information exchange methodology is studied between IEDS using SOAP protocol based on XML and PtP communication. Inference-based solution of the IED identifies the faulted zone autonomously from free information exchange among IEDs, transmits the operation information to the above SCADA system, also determines whether it executes or not for commands from the above SCADA. Finally, Inference-based solution is implemented using MS Visual C++ MFC, MS SOAP and MS XML. Availability and accuracy of the design is verified from simulation reviews for typical distribution substation.

  • PDF

Determination of phenols in water by derivatization and GC/MS (유도체화와 GC/MS를 이용한 물중의 페놀류 분석)

  • Park, Gyo-Beom;Lee, Sueg-Geun
    • Analytical Science and Technology
    • /
    • v.18 no.6
    • /
    • pp.453-459
    • /
    • 2005
  • Phenol compounds in water were simultaneously analyzed by extractive derivatization. Aqueous solution was controlled to pH 13 with sodium hydroxide, and then $500{\mu}L$ of benzoyl chloride was added to the solution. The solution was shaken for 15 minutes and extracted with diethyl ether and then analyzed using GC/MS-SIM. The calibration curves of phenolic compounds in the range of 0.05 to $5.0{\mu}g/mL$ showed a good linearity having the correlation coefficient of $r^2=0.9915$ and standard deviation of ${\leq}8.5%$, respectively. The recoveries by this method ware 58.4-114.0%.

A Hybrid ON/OFF Method for Fast Solution of Electromagnetic Inverse Problems Based on Topological Sensitivity

  • Kim, Dong-Hun;Byun, Jin-Kyu
    • Journal of Magnetics
    • /
    • v.16 no.3
    • /
    • pp.240-245
    • /
    • 2011
  • A new hybrid ON/OFF method is presented for the fast solution of electromagnetic inverse problems in high frequency domains. The proposed method utilizes both topological sensitivity (TS) and material sensitivity (MS) to update material properties in unit design cells. MS provides smooth design space and stable convergence, while TS enables sudden changes of material distribution when MS slows down. This combination of two sensitivities enables a reduction in total computation time. The TS and MS analyses are based on a variational approach and an adjoint variable method (AVM), which permits direct calculation of both sensitivity values from field solutions of the primary and adjoint systems. Investigation of the formulations of TS and MS reveals that they have similar forms, and implementation of the hybrid ON/OFF method that uses both sensitivities can be achieved by one optimization module. The proposed method is applied to dielectric material reconstruction problems, and the results show the feasibility and effectiveness of the method.

Development of Universal Graphic User Interface Design for MS Windows for Elderly Users (고령사용자를 위한 MS Windows유니버설 GUI디자인 개발)

  • Kim, Mi-Young;Kim, Hyun-Jeong
    • Archives of design research
    • /
    • v.19 no.1 s.63
    • /
    • pp.15-26
    • /
    • 2006
  • As the interest and use of computer have been increased among elderly users according to the entry to the aging society, the issue of universal design for computer usability was brought forward. Especially, it is widely recognized that universal UI(User Interlace) design on MS windows is important. The objective of this study is to conceptualize Universal GUI design on MS windows which can be used more easily and intuitively by novice users such as elderly and housewives. Especially, the solution for Universal GUI design on MS windows was developed by reflecting elderly users' needs because elderly users is the group with more difficulties than other user groups in learning and using MS windows. First, elderly user's needs was collected by participant observation as a teaching assistant in computer dass for elderly people for 4 weeks. Secondly, the experimental test and in-depth interview was implemented to find difficulties factors and needs in addition to participant observation. Based on the findings, the new GUI design solution was suggested. The design solution consists of ideas in several categories such as setting default, simplification of function for easy conceptual model making, customization of function and working environment, and intuitive GUI in interaction process. The new MS windows GUI design can be accessed by novice mode when user login in window XP. This study has the significance in finding elderly users detailed needs through in-depth and long term participant observation. However, the usability of the suggested prototype needs to be verified to various user groups besides elderly users in the future.

  • PDF

Comparative analysis of glycerin in cosmetics by LC/MS and 1H NMR (LC/MS와 1H NMR을 이용한 화장품속의 글리세린 비교분석)

  • Park, Gyo-Beom;Park, Chan Jo;Lee, Sueg-Geun
    • Analytical Science and Technology
    • /
    • v.20 no.5
    • /
    • pp.400-405
    • /
    • 2007
  • The comparative analysis of glycerin in cosmetic samples was carried out by LC/MS and $^1H$ NMR spectrometry. For the LC/MS analysis, aqueous solution was controlled in strong basic condition with sodium hydroxide, and benzoyl chloride was added to the solution for the derivatization of glycerin. The derivative was extracted using pentane and analyzed by the LC/MS. For the $^1H$ NMR analysis, sample was directly dissolved in $D_2O$ solvent without pretreatment. The quantitative analysis of glycerin was done by $^1H$ NMR ERETIC method. The analysis results of LC/MS and $^1H$ NMR showed that the calibration curves were a good linearity with $r^2=0.9991$ in the range of 0.1 to $10{\mu}g/mL$ and $r^2=1$ in the range of 25 to $500{\mu}g/mL$, respectively.