• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.1 s.6
• /
• pp.75-82
• /
• 1996

As can be seen in US case with the introduction of ISTEA and CAAA, the expansion of the transportation decision-making role of local government is expected to be quite apparent in Korea, and the increased importance of decision-making in transportation issues requires increased attention to both justification and analysis of transportation initiatives. A GIS-based facility management system in a desktop computing environment has been constructed using MapInfo, ARC/INFO, and Microstation to allow such expanded role of local government's decision-making activities. In this paper, first, authors try to explain the procedures of system design; that is, the digital map production including vectorizing, data conversion, attribute data entry, and application programming development. Then, various management functions which are basically embedded in MapInfo environment, and application functions established by the use of MapBasic language has been explored Finally, the possible benefits of combining geographic information systems with traffic planning scheme has also been described with some discussion.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.544-547
• /
• 2003

The objective of this study is to investigate the contamination levels and dispersion patterns of arsenic and heavy metals and to estimate the bioaccessible fraction of the metals in soil and plant samples in the vicinity of the abandoned Songcheon Au-Ag mine. Tailings, soils, plants (Chinese cabbage, red pepper, soybean, radish, sesame leaves, green onion, lettuce, potato leaves, angelica and groundsel) and waters were collected around the mine site. After appropriate preparation, all samples were analyzed for As, Cd, Cu, Pb and Zn by ICP-AES and ICP-MS. Elevated levels of As and heavy metals were found in tailings. Mean concentrations of As in agricultural soils were higher than the permissible level. Especially, maximum level of As in farmland soil was 513 mg/kg. The highest concentrations of As and Zn were found in Chinese cabbage (6.7 mg/kg and 359 mg/kg, respectively). Concentrations of As, Cd, and Zn in most stream waters which are used for drinking water around this mine area were higher than the permissible levels regulated in Korea. Maximum levels of As, Cd and Zn in stream waters were 0.78 mg/L, 0.19 mg/L and 5.4 mg/L, respectively. These results indicate that mine tailings can be the main contamination sources of As and heavy metals in the soil-water system in the mine area. The average of estimated bioaccessible fraction of As in farmland soils were $3.7\%$ (in simulated stomach) and $10.8\%$ (in simulated small intestine). The highest value of bioaccessible fraction of metal in farmland soils was $46.5\%$ for Cd.

• Journal of Nutrition and Health
• /
• v.43 no.3
• /
• pp.246-259
• /
• 2010

The incidence of chronic disease is continuously increasing in Korea. Especially, office workers have higher risk of chronic disease because of their dietary habit and lifestyle. The study aimed to investigate the effect of tailored nutrition counseling on improving chronic disease risk factors. Ninety-nine male workers (age $46.9{\pm}7.0$ yrs) volunteered for 12 weeks of nutrition program containing dietary intake and physical activity adjustment. Five individualized programs were performed with the main theme of weight loss (WL, n = 16), blood pressure lowering (BL, n = 34), normalizing blood glucose (GL, n = 21), lipid lowering (LL, n = 13) and reducing MS risk factors (ML, n = 15). Anthropometric data, blood-pressure, self-reported questionnaire, blood profiles were measured before and after 12weeks of nutrition education. The education program included 5 times of 1：1 interview. Compared to 0 week, anthropometric data (weight, BMI, fat, visceral fat, waist, SBP, DBP) were significantly decreased after 12 weeks (p < 0.001). Fasting blood glucose and total cholesterol were decreased (p < 0.05). The primary outcomes with individually tailored programs showed to be more effective than one general nutrition program.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1043-1056
• /
• 2017

A styled document is a document that contains diverse decorating functions such as different font, colors, tables and images generally authored in a word processor (e.g., MS-WORD, Open Office). Compared to a plain-text document, a styled document enables a human to easily recognize a logical structure such as section, subsection and contents of a document. However, it is difficult for a computer to recognize the structure if a writer does not explicitly specify a type of an element by using the styling functions of a word processor. It is one of the obstacles to enhance document version management systems because they currently manage the document with a file as a unit, not the document elements as a management unit. This paper proposes a machine learning based approach to analyzing the logical structure of a styled document composing of sections, subsections and contents. We first suggest a feature vector for characterizing document elements from a styled document, composing of eight features such as font size, indentation and period, each of which is a frequently discovered item in a styled document. Then, we trained machine learning classifiers such as Random Forest and Support Vector Machine using the suggested feature vector. The trained classifiers are used to automatically identify logical structure of a styled document. Our experiment obtained 92.78% of precision and 94.02% of recall for analyzing the logical structure of 50 styled documents.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.643-645
• /
• 2013

When you convert word processor files with large amounts of input data to PDF files in on/off line, current PDF conversion solutions do one of the source files to perform the conversion task in the Windows PDF virtual printer environment. Depending on the size of the original PDF file conversion speed to convert PDF to do a large amount of different and if you are performing a very slow speed. When you convert files to PDF in this sequence, depending on the capacity of the original file, PDF conversion rate is different, if automating a mass conversion to the PDF, the speed is very slow. In this paper, the PDF conversion which can use the Windows Terminal Server from one Windows Server when performing a PDF conversion processing of the source file, to create a multi-session Terminal, to perform the PDF conversion process at the same time was studied.

• The Korean Journal of Community Living Science
• /
• v.22 no.4
• /
• pp.615-621
• /
• 2011

This study was conducted to evaluate of the protection efficiency in each part of developed pesticide-proof clothes by repeated washings. We investigated the effect of repeated laundering on mechanical properties of pesticide-proof clothes (not washed vs 5 times washed). We also examined pesticide infiltration rate into the pesticide-proof clothes by repeated laundering. The patches(TCL paper, surface area 50cm2)were attached to the inside of pesticide-proof clothes(head, chest, right upper-arm, right forearm, left thigh, left calf, back) which subjects had dressed in during pesticide spraying. The patches were detached from working clothes after work. For the extraction of pesticide in pesticide-proof clothes, sonication was applied for 30 min with methanol. The gas chromatography/mass spectrometry (GC/MS) was applied to identify the pesticide component. The results of this study are as follows: The force strength, water-vapour resistance and surface wetting resistance of pesticide-proof clothes decreased 5 times more in washed clothes. The concentration of pesticide was the highest in the head area of pesticide-proof clothes. In seven parts of TLC paper attached to the pesticide proof clothes, the concentration of pesticide was higher in the left thigh. The penetration part and concentration of pesticide increased as washing was repeated. Therefore the conclusion which can be drawn from this study is this: protection efficiency of pesticide-proof clothes decrease by repeated washings.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.177-185
• /
• 2012

In this paper, we developed the composition system that it can efficiently edit camera recording data, images, office document such as powerpoint data, MS word data etc in real-time and broadcasting system that the file is made by the composition system. In this Study, we developed two kinds of algorithm; Approximate Composition for Optimization (ACFO) and Sequence Composition using Memory Que (SCUMQ). Especially, the system is inexpensive and useful because the system is based on mobile devices and PCs when lectures hope to make video institutional contents. Therefore, it can be contributed for e-learning and m-learning. In addition, the system can be applied to various fields, different kinds of multimedia creation, remote conferencing, and e-commerce.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.2
• /
• pp.103-111
• /
• 2019

In this study, characteristics of sediments and suspended solids flowing into Andong and Imha Dam was analyzed by color, X-ray diffraction and ICP/MS analysis. The minerals of sediments and suspended solid consist mainly of quartz, albite, chlorite, illite and small amounts of montmorillonite and kaolinite. Unlike the Andong Dam, the Imha Dam sediments contain large amounts of calcite. Color of sediments and suspended solids varies from grayish brown to dark orange. The concentrations of major heavy metals of sediments and suspended solids in the Andong and the Imha Dam are higher than the US National Oceanic and Atmospheric Administration standard values. The concentration of heavy metals in sediments of Andong is higher than that of Imha Dam because concentration of heavy metals in the suspended solid flowing into Andong is higher than that of Imha Dam.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.2
• /
• pp.136-141
• /
• 2021

Heating cables, widely used in office buildings, factories, streets and railways, deteriorate in electrical insulation during operation. The insulation deterioration of heating cables leads to electric discharges that can cause electrical fires. With this background, this paper dealt with a condition monitoring technique for heating cables by the analysis of discharge signals to prevent electrical fires. Insulation deterioration was simulated using an arc generator specified in UL1699 under AC operation, and the characteristic and propagation of discharge signals were analyzed on a 100 meter-long heating cable. Discharge signals produced by insulation deterioration were detected as a voltage pulse because they are as small as a few mV and they are attenuated through propagation path. The frequency spectrum of discharge signals mainly existed in the range from 70 kHz to 110 kHz, and the maximum attenuation of the signal was 84.8% at 100 meters away from the discharge point. Based on the experimental results, a monitoring device, which is composed of a high pass filter with the cut-off frequency of 70 kHz, a comparator, a wave shaper and a microprocessor, was designed and fabricated. Also, an algorithm was designed to discriminate the discharge signal in the presence of noise, compared with the pulse repetition period and the number of pulse counts per 100ms. In the experiment, the result showed that the prototype monitoring device could detect and discriminate the discharge signals produced at every discharge point on a heating cable.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.2
• /
• pp.91-102
• /
• 2008

Purpose: To enlarge the efficiency of operation and establish a constituency for development of new radiotherapy treatment through database which is established by arranging and indexing radiotherapy related affairs in well organized manner to have easy access by the user. Materials and Methods: In this study, Access program provided by Microsoft (MS Office Access) was used to operate the data base. The data of radiation oncology was distinguished by a business logs and maintenance expenditure in addition to stock management of accessories with respect to affairs and machinery management. Data for education and research was distinguished by education material for department duties, user manual and related thesis depending upon its property. Registration of data was designed to have input form according to its subject and the information of data was designed to be inspected by making a report. Number of machine failure in addition to its respective repairing hours from machine maintenance expenditure in a period of January 2008 to April 2009 was analyzed with the result of initial system usage and one year after the usage. Results: Radiation oncology database system was accomplished by distinguishing work related and research related criteria. The data are arranged and collected according to its subjects and classes, and can be accessed by searching the required data through referring the descriptions from each criteria. 32.3% of total average time was reduced on analyzing repairing hours by acquiring number of machine failure in addition to its type in a period of January 2008 to April 2009 through machine maintenance expenditure. Conclusion: On distinguishing and indexing present and past data upon its subjective criteria through the database system for radiation oncology, the use of information can be easily accessed to enlarge the efficiency of operation, and in further, can be a constituency for improvement of work process by acquiring various information required for new radiotherapy treatment in real time.