• ETRI Journal
• /
• v.9 no.1
• /
• pp.118-124
• /
• 1987

Short channel n-MOSFET의 드레인-소오스 사이의 breakdown은 단순한 접합 breakdown이 아닌 avalanche-induced breakdown으로 p-MOSFET, long channel n-MOSFET의 breakdown 전압보다 훨씬 작은 값을 갖는다. Short channel n-MOSFET의 breakdown의 특징은 current-controlled 부저항 특성(snapback)이 나타나고, 게이트 전압에 따라 breakdown 전압보다 작은 sustainning 전압이 존재한다. 이와 같은 sustainning 전압은 short channel n-MOSFET의 안정한 동작에 또 하나의 제한 요소가 될 수 있다. 따라서 공정 및 회로 시뮬레이션을 위해, short channel n-MOSFET의 avalanche breakdown 현상에 대한 정확한 분석이 요구된다. Short channel n -MOSFET의 avalanche breakdown 현상을 분석하기 위해서Parasitic bipolar transistor를 도입한 분석적 모델을 이용하였다.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.159-162
• /
• 2009

The necessity of radiation dosimeter with precise measurement of radiation dose is increased and required in the field of spacecraft, radiotheraphy hospital, atomic plant facility, etc. where radiation exists. Until now, a low power commercial metal-oxide semiconductor(MOS) transistor has been tested as a gamma radiation dosimeter. The measurement error between the actual value and the measurement one can occur since the MOSFET(MOS field-effect transistor) dosimeter, which is now being used, has two gates with same width. The measurement value of dosimeter depends on the variation of threshold voltage, which can be affected by the environment such as temperature. In this paper, a radiation dosimeter having a pair of MOSFET is designed in the same silicon substrate, in which each of the MOSFETs is operable in a bias mode and a test mode. It can measure the radiation dose by the difference between the threshold voltages regardless of the variation of temperature.

• Journal of Sensor Science and Technology
• /
• v.26 no.4
• /
• pp.292-296
• /
• 2017

It has become ever harder to design reliable circuits with each nanometer technology node under normal operation conditions, a transistor device can be affected by various aging effects resulting in performance degradation and eventually design failure. The reliability (aging) effect has traditionally been the area of process engineers. However, in the future, even the smallest of variations can slow down a transistor's switching speed, and an aging device may not perform adequately at a very low voltage. Because of such dilemmas, the transistor aging is emerging as a circuit designer's problem. Therefore, in this paper, the impact of aging effects on the delay and power dissipation of digital circuits by using nanomneter MOSFET power gating structure has been analyzed.. Based on this analyzed aging models, a reliable digital circuits can be designed.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.82-84
• /
• 2019

본 논문에서는 Induction Heating(IH) 시스템에서 WBG 소자인 SiC MOSFET과 GaN Transistor의 Performance 비교를 통해서 소자의 적합성을 분석한다. SiC 및 GaN 소자를 직렬 공진형 컨버터로 구성된 IH 시스템에 적용하여 온도, 전압, 전류, Gate 저항 등을 고려한 도통 손실, 스위칭 손실, 역방향 도통 손실과 열 해석 프로그램을 통한 열 성능 등의 비교가 수행되며, 이를 통해 소자 적합성이 분석된다. 각 소자에 따른 IH 시스템에 대한 시뮬레이션을 수행하여, 이론적 손실 비교를 통한 소자 적합성 분석에 대한 타당성을 검증한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.109-113
• /
• 2020

A power device is a component used as a switch or rectifier in power electronics to control high voltages. Consequently, power devices are used to improve the efficiency of electric-vehicle (EV) chargers, new energy generators, welders, and switched-mode power supplies (SMPS). Power device designs, which require high voltage, high efficiency, and high reliability, are typically based on MOSFET (metal-oxide-semiconductor field-effect transistor) and IGBT (insulated-gate bipolar transistor) structures. As a unipolar device, a MOSFET has the advantage of relatively fast switching and low tail current at turn-off compared to IGBT-based devices, which are built on bipolar structures. A superjunction structure adds a p-base region to allow a higher yield voltage due to lower R_DS (on) and field dispersion than previous p-base components, significantly reducing the total gate charge. To verify the basic characteristics of the superjunction, we worked with a planar type MOSFET and Synopsys' process simulation T-CAD tool. A basic structure of the superjunction MOSFET was produced and its changing electrical characteristics, tested under a number of environmental variables, were analyzed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.3
• /
• pp.204-212
• /
• 2020

In this study, device suitability analysis is performed by comparing the performance of SiC MOSFET and GaN Transistor, which are WBG power semiconductor devices in the induction heating (IH) system. WBG devices have the advantages of low conduction resistance, switching losses, and fast switching due to their excellent physical properties, which can achieve high output power and efficiency in IH systems. In this study, SiC and GaN are applied to a general half-bridge series resonant converter topology to compare the conduction loss, switching loss, reverse conduction loss, and thermal performance of the device in consideration of device characteristics and circuit conditions. On this basis, device suitability in the IH system is analyzed. A half-bridge series resonant converter prototype using the SiC and GaN of a 650-V rating is constructed to verify device suitability through performance comparison and verified through an experimental comparison of power loss and thermal performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.359-359
• /
• 2010

IGBT(Insulated Gate Bipolar Transistor) 란 MOS(Metal Oxide Silicon) 와 Bipolar 기술의 결정체로 낮은 순방향 손실(Low Saturation)과 빠른 Speed를 특징으로 기존의 Thyristor, BJT, MOSFET 등으로 실현 불가능한 분양의 응용처를 대상으로 적용이 확대 되고 있고, 300V 이상의 High Power Application 영역에서 널리 사용되고 있는 고효율, 고속의 전력 시스템에 있어서 필수적으로 이용되는 Power Device이다. IGBT는 출력 특성 면에서 Bipolar Transistor 이상의 전류 능력을 가지고 있고 입력 특성 면에서 MOSFET과 같이 Gate 구동 특성을 갖기 때문에 High Switching, High Power에 적용이 가능한 소자이다. 반면에, Conventional IGBT는 MOSFET과 달리 IGBT 내부에 Anti-Parallel Diode가 없기 때문에 Inductive Load Application 적용시에는 별도의 Free Wheeling Diode가 필요하다. 그래서, 본 논문에서 별도의 Anti-Parallel Diode의 추가 없이도 Inductive Load Application에 적용 가능한 RC IGBT를 적용하여 600V/15A급 Three Phase Inverter Module을 제안 하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.509-509
• /
• 2000

The circuit is designed for improving the relationship between input voltage and output current of the MOS transistor, which is square function. This circuit can be used instead of n-channel MOSFET at once. The circuit consists of MOSFET, which acts as a voltage receiver. The source of MOSFET is connected to current control part which consist of bipolar transistors. The exponential characteristic of bipolar transistor is used to solve the square function of MOSFET that base on concept of log and anti-log circuit. The experimental results of simulation are agreed with the implemented circuit.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.200-204
• /
• 2012

This study has presented the analysis of breakdown voltage for a double-gate metal-oxide semiconductor field-effect transistor (MOSFET) based on the doping distribution of the Gaussian function. The double-gate MOSFET is a next generation transistor that shrinks the short channel effects of the nano-scaled CMOSFET. The degradation of breakdown voltage is a highly important short channel effect with threshold voltage roll-off and an increase in subthreshold swings. The analytical potential distribution derived from Poisson's equation and the Fulop's avalanche breakdown condition have been used to calculate the breakdown voltage of a double-gate MOSFET for the shape of the Gaussian doping distribution. This analytical potential model is in good agreement with the numerical model. Using this model, the breakdown voltage has been analyzed for channel length and doping concentration with parameters such as projected range and standard projected deviation of Gaussian function. As a result, since the breakdown voltage is greatly changed for the shape of the Gaussian function, the channel doping distribution of a double-gate MOSFET has to be carefully designed.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.420-424
• /
• 2014

본 논문에서는 접합을 가지지 않는 Junctionless transistor (JLT)의 두께에 따른 특성 차이 및 기존의 MOSFET과의 특성 비교를 EDISON 시뮬레이터를 통해 확인을 하였다. JLT의 두께가 얇아짐에 따라 On/off 비율 측면에서 소자의 특성이 향상됨을 확인 하였으며, 기존 Inversion mode의 MOSFET과 비교하여 단 채널 효과 측면에서도 향상된 특성을 확인 할 수 있었다.