• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.20-29
• /
• 2014

Density is applied both three major macroscopic traffic variables (traffic volume, speed, and density) and two measures of effectiveness (MOE) for level of service (LOS) on highway (density and V/C). Especially, it is known for the most accurate MOE on evaluating the LOS of highway. Despite such importance, there is a lack of study on density relatively than other variables for its difficulty of measurement. Existing density estimation methods have some limitations such as density values of same traffic flow vary with collecting time. In this study, we researched actual density measuring method with panoramic image, after each CCTV images in the Sapaesan Tunnel on Seoul Ring Expressway are matched into one panoramic image. Analysis through the Central Limit Theorem shows that density of 24 1 km-images, which means 24 second, applies traffic situation well. That is to say that reasonable density value regardless of collecting time, and practical density which represents actual traffic flow can be taken in case of measuring density by suggested collecting cycle.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.336-343
• /
• 2019

Effects of a novel mold inhibitor specifically for bamboo, on the properties of composite products have been confirmed in this study. The mechanical and dimensional stability properties of bamboo fiber-based composites (BFBCs) from different bamboo species were also investigated. The results showed that Burmanica Gamble possessed the highest values of modulus of elasticity (MOE) of 33.2 GPa, modulus of rupture (MOR) of 286.9 MPa, compressive strength of 182.6 MPa and shear strength of 24.0 MPa. By contrast, Phyllostochys heterocycla among all of species showed the lowest MOE of 16.3 GPa, MOR of 170.3 MPa and compressive strength of 128.9 MPa were the lowest among all of species. Moreover, there is a remarkable variation in the swelling and water absorption between the samples with 4 h and 28 h water immersion treatment, especially Phyllostachys iridenscens. Overall, the results suggested that TCIT (Tebuconazole and 3(2H)-isothiazolone) had no significant effect on the mechanical properties compared with the control condition, and it would be utilized as an antimould of BFBCs manufacturing.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.95-101
• /
• 2002

Physical and mechanical properties of major Korean ash species were examined. For Fraxinus rhynchophylla and Fraxinus sieboldiana, green moisture content of sapwood was almost the same value as heartwood. Heartwood of Fraxinus mandshurica, however, had slightly higher moisture content than sapwood. Green and oven dry densities of F. mandshurica were lower than those of F. rhynchophylla and F. sieboldiana. Swelling and shrinkage of sapwood in F. sieboldiana showed somewhat higher value than those of F. rhynchophylla. Longitudinal compressive strength and modulus of elasticity in F. sieboldiana were lower values than those in the other species. Shearing strength in radial section was higher than that in tangential section of all samples. It could be noted that shearing strength of F. sieboldiana demonstrated higher value than that of the other species. Three species had excellent bending properties in MOR and MOE. Impact bending absorbed energy for F. rhynchophylla and F. mandshurica did not show any significant differences.

• Journal of Gifted/Talented Education
• /
• v.25 no.2
• /
• pp.279-298
• /
• 2015

This study analyzes the interaction of the policy of human resource in science and technology and the policy of education for the gifted. In Korea, the goals of gifted education seem to have gravitated more toward serving the national perspective of creating a pool of high-quality scientists for economic development, rather than toward helping individuals achieve their educational aspirations and promote their talents. The science education policy for the gifted can be categorized into two: one primarily by the Ministry of Science (MOST) and another by the Ministry of Education (MOE). So far, the policy of science education for the gifted has been written by MOE. Such an imbalance has been created because the two ministries differed in their values and priorities. MOST has designed the science education policy in order to foster the gifted as high-quality human resources in science and technology that can help contribute to economic development. On the other hand, MOE has designed the policy for the gifted with educational equity in mind. Although the policy by MOST had have more influence in implementing overall policies of educating the gifted, the two ministries have interacted and formulated the educational system of gifted in Korea. This study sheds light on the process that MOST has legitimized their science education policy for the gifted by designing it in line with the national and social goals, and has formulated a basis on which the gifted can contribute to R&D for economic development.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.3
• /
• pp.15-24
• /
• 1984

The $3{\times}3{\times}30\;cm^3$ sized specimens of Douglas-fir(Pseudotsuga menziesii) and western hemlock(Tsuga heterophylla) in this study were soaked in four fire-retardant solutions of ammonium sulfate, monoammonium phosphate, diammonium phosphate, and aluminium chloride for 1, 24, 72, 168, and 336 hours. Subsequently they were air-dried and burned at high temperature of ca. $1,800^{\circ}C$ and for short time of 5 minutes. This study estimated the relationship between the adsorbed chemicals and the residual weight ratio or residual bending strength of these partly burned lumbers. The results were as follows; 1) In average amount of chemical adsorption, diammonium phosphate showed the largest and aluminium chloride the smallest regardless of species but monoammonium phosphate was larger in Douglas-fir than that of western hemlock. 2) The amount of chemical adsorption was larger in western hemlock than Douglas-fir on the whole. 3) The amount of chemical adsorption was increased with the increase of soaking time but the rate of increase began to decrease at 200hrs. 4) Residual weight ratios showed no difference between species but showed differences among the chemicals treated i.e. monoammonium phosphate, diammonium phosphate, ammonium sulfate and aluminium chloride in turn from the largest to the smallest. 5) MOR values showed linear increase with the increase of residual weight ratios but showed no difference in species and chemicals respectively. 6) In the relationship between amount of chemical adsorption and MOR, only diammonium phosphate showed the curve of secondary degree with significance in Douglas-fir. 7) The MOE value of burned Douglas-fir lumber increased and showed significance of 99% as the adsorbed chemical amount increased, but among the chemicals only monoammonium phosphate showed significance. The MOE value of burned western hemlock lumber didn't show significance. 8) In only Douglas-fir, the correlation between adsorbed chemical amount and work to proportional limit showed significance in only monoammonium phosphate. And in both Douglas-fir and western hemlock, the correlation between adsorbed chemicals and work to maximum load showed significance in monoammonium phosphate.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.538-547
• /
• 2011

In this study, eco-friendly hybrid composite boards were manufactured from green tea and wood fibers for application as interior materials with various functionalities of green tea and strong strength properties of wood fibers. In this relation, the effect of green tea content on dynamic MOEs (modulus of elasticity) of these green tea and wood fibers composite boards were investigated. The dynamic MOEs of hybrid composite boards were lower than those of control boards without green tea, and the values decreased with the increase of green tea content. Also, the dynamic MOEs appeared to be somewhat different by resin type used for board manufacture. The hybrid composite boards manufactured from $E_1$ grade urea resin, which has higher molar ratio of formaldehyde to urea than that of $E_0$ grade one, were 1.06~1.54 times higher than that manufactured from $E_0$ grade. And, the differences between hybrid composite boards manufactured from both adhesive increased with the increase of green tea content. On the other hand, high correlations were found between dynamic MOE and static bending strength performances, it was concluded that static bending strength performances could be estimated from the dynamic MOE, except for a few hybrid board types with large variations.

• Journal of Korean Society of Forest Science
• /
• v.63 no.1
• /
• pp.12-20
• /
• 1984

This research was performed to estimate the properties of particleboard based on the press time and temperature which was made of chip of larch that grows in Korea. The results in this study were as follows: 1) Even though the chips, 1:1-35 ratio between length and thickness, are relatively bad condition, the surface smoothness that can easily spread the adhesive evenly and thoroughly and bonding ability of chips can give proper physical properties. 2) It shows more mechanical properties at the press time of 10 min. in MOR (Modulus of Rupture), MOE (Modulus of Elasticity) and SHA (Screw Holding Ability). 3) It is not significant according to the press time 20 min. in MOR, IBS (Internal Bonding Strength) and SHA, for the reciprocal actions between the accelerating aging effect of chip and the softening effect of adhesion are occured. 4) IBS is rising according to the increasing temp at the press time of 10 min. Because it needs to transfer the plate heat to make the proper hardening temp. In the layer. 5) The heat treatment effects have greatly influenced the stahility of dimension by falling the absorption, anisotropy and inhomegenity. As a result of these the values of thickness and linear expansion ratio were respectively dropped by the increase of press temp and the time and so did absorption.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.70-76
• /
• 1995

Research was conducted at the Wood Materials and Engineering Laboratory, Washington State University, Pullman, WA to evaluate the effects of the sequence of wax addition, wax level, and wax type on mechanical properties and water resistance performance of isocyanate-bonded particleboard. Mechanical properties and water resistance performance were not influenced significantly by the sequence of wax addition. Internal bond and wet modulus of rupture in bending strength were decreased significantly by increasing the wax emulsion level, but dry modulus of rupture and modulus of elasticity in bending strength were not decreased significantly by increasing the wax emulsion level. Dry internal bond, dry and wet moduli of rupture, and modulus of elasticity were not decreased by increasing the solid wax level except for wet internal bond. The addition of 1.0 and 1.5% wax level did not produce any significant additional water resistance effect when compared to the addition of 0.5% wax level. Internal bond values of boards with solid wax addition showed significantly better results than boards with just a wax emulsion added. Modulus of rupture, modulus of elasticity, and water resistance performance did not show significant difference between solid wax and wax emulsion.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.65-74
• /
• 2010

This study aims at developing a method for estimating passenger car equivalency (PCE) values for various vehicle types that could be considered in estimating capacity and delay at intersections without traffic signals, especially at modern small 3-leg roundabouts. Unlike signalized intersections, the PCE value has not yet been treated explicitly in traffic operations involving unsignalized intersections. Both empirical and theoretical approaches for determining the PCE values at modern small 3-leg roundabouts were evaluated. As a result, the PCEs derived in this study were highly correlated with those of field measurements.

• Journal of Korean Society on Water Environment
• /
• v.29 no.6
• /
• pp.842-846
• /
• 2013

In 2012, the Korean Ministry of Environment (MOE) added 3 new water quality standards for the protection of human health; specifically, regarding 1,4-dioxane, formaldehyde, and hexachlorobenzene. In this study, we assimilated the water quality standards of these 3 substances from other countries, with respect to surface water quality standards for human health protection and drinking water standards. We subsequently investigated how these standard values were derived. 1,4-Dioxane is managed as an environmental standard for human health in Japan, and as a drinking water quality standard in WHO, New Zealand, and Japan with respect to both carcinogenic and non-carcinogenic effects. In New York, the oncogenic effects of formaldehyde in drinking water intake is considered, whereas WHO, Australia, New Zealand, and Japan also assess the non-carcinogenic effects of formaldehyde when setting their standards. USEPA and New York have a water quality standard for human health protection with respect to hexachlorobenzene based on carcinogenic effects. This study focuses on deriving water quality standards for the 3 new substances, or obtaining baseline information to revise the values of existing substances in the future.