• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.152-155
• /
• 2009

In this paper, we propose the image encryption method using complemented MLCA based on 90/150 NBCA(Null Boundary Cellular Automata). The encryption method is processed in the following order. First, complemented MLCA, which is derived from linear LFSR, is used to produce a PN(pseudo noise) sequence, which matches the size of the original image. Then, the created complemented MLCA sequence goes through a XOR operation with the original image to become encrypted. Lastly, an experiment is processed to verify the effectiveness of this method.

• Journal of Sensor Science and Technology
• /
• v.12 no.6
• /
• pp.265-272
• /
• 2003

This paper describes anodic bonding characteristics of MLCA (Multi Layer Ceramic Actuator) to Si-wafer using evaporated Pyrex #7740 glass thin-films for MEMS applications. Pyrex #7740 glass thin-films with same properties were deposited on MLCA under optimum RF magneto conditions(Ar 100%, input power $1\;W/cm^2$). After annealing in $450^{\circ}C$ for 1 hr, the anodic bonding of MLCA and Si-wafer was successfully performed at 600 V, $400^{\circ}C$ in - 760 mmHg. Then, the MLCA/Si bonded interface and fabricated Si diaphragm deflection characteristics were analyzed through the actuation test. It is possible to control with accurate deflection of Si diaphragm according to its geometries and its maximum non-linearity is 0.05-0.08 %FS. Moreover, any damages or separation of MLCA/Si bonded interfaces do not occur during actuation test. Therefore, it is expected that anodic bonding technology of MLCA/Si wafers could be usefully applied for the fabrication process of high-performance piezoelectric MEMS devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2171-2179
• /
• 2009

In this paper, we propose a novel Image Encryption using MLCA (Maximum Length Cellular Automata) and CAT (Cellular Automata Transform). Firstly, we use the Wolfram rule matrix to generate MLCA state transition matrix T. Then the state transition matrix T changes pixel value of original image according to pixel position. Next, we obtain Gateway Values to generate 2D CAT basis function. Lastly, the basis function encrypts the MLCA encrypted image into cellular automata space. The experimental results and security analysis show that the proposed method guarantees better security and non-lossy encryption.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.6
• /
• pp.25-30
• /
• 2004

Linear cellular automata(CA) which generate maximum-length cycles, have wide applications in generation of pseudo-random patterns, signature analysis, cryptography and error correcting codes etc. Linear CA whose characteristic polynomial is primitive has been studied. In this paper Ive propose a effective method for generation of a variety of maximum-length CA(MLCA). And we show that the complemented CA's derived from a linear MLCA are all MLCA. Also we analyze the Properties of complemented MLCA. And we prove that the number of n-cell MLCA is ${\phi}(2^{n}-1)2^{n+1}$/n.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.34-41
• /
• 2009

In this paper we propose a new image encryption method which utilizes Complemented MLCA(Complemented Maximum Length Cellular Automata) based on IBCA(Intermediate Boundary CA) and 2D CAT(Cellular Automata Transform). The encryption method is processed in the following order. First, Complemented MLCA is used to create a PN (pseudo noise) sequence, which matches the size of the original image. And, the original image goes through a XOR operation with the created sequence to convert the image into Complemented MLCA image. Then, the gateway value is set to produce a 2D CAT basis function. The produced basis function is multiplied by the encrypted MLCA image that has been converted to process the encipherment. Lastly, the stability analysis and PSNR(Peak Signal to Noise Ratio) verifies that the proposed method holds a high encryption quality status.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.105-108
• /
• 2003

본 논문은 파이렉스 #7740 유리박막을 이용한 MEMS용 MLCA와 Si기판의 양극접합 특성에 관한 것이다. 최적의 RF 마그네트론 스퍼터링 조건(Ar 100 %, input power $1W/\textrm{cm}^2$)하에서 MLCA 기판위에 파이렉스 #7740 유리의 특성을 갖는 박막을 증착한 후 600 V, $400^{\circ}C$에서 1시간동안 양극접합했다. 그 다음에 Si 다이어프램을 제조한 후, MLCA/Si 접합계면과 MLCA 구동을 통한 Si 다이어프램 변위특성을 분석 및 평가하였다. 다이어프램 형상에 따라 정밀한 변위 제어가 가능했으며 0.05-0.08 %FS의 우수한 선형성을 나타내었다. 또한, 측정동안 접합계면 균열이나 계면분리가 일어나지 않았다. 따라서, MLCA/Si기판 양극접합기술은 고성능 압전 MEMS 소자 제작공정에 유용하게 사용가능할 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1469-1475
• /
• 2010

This paper presents a problem of existing encryption methods using pseudo-random numbers based on MLCA or complemented MLCA and proposes a method to resolve this problem. The existing encryption methods have a problem which the edge of original image appear on encrypted image because the image have color similarity of adjacent pixels. In this proposed method, we transform the value and spatial coordinates of all pixels by using pseudo-random numbers based on MLCA. This method can resolve the problem of existing methods and improve the level of encryption by encrypting pixel coordinates and pixel values of original image. The effectiveness of the proposed method is proved by conducting histogram and key space analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6C
• /
• pp.361-367
• /
• 2011

In this paper, we propose encryption method to using complemented MLCA(Maximum Length Cellular Automata) based on NBCA(Null Boundary CA) and 2D CAT (Two-Dimensional Cellular Automata Transform) for efficient image encryption. The encryption method is processed in the following order. First, a transition matrix T is created using the Wolfram Rule matrix. Then, the transition matrix T is multiplied to the original image that is intended to be encrypted, which transfers the pixel values of the original image. Furthermore, the converted original image goes through a XOR operation with complemented vector F to convert into a complemented MLCA applied image. Then, the gateway value is set and 2D CAT basis function is created. Also, the 2D CAT is encrypted by multiplying the created basis function to the complemented MLCA applied image. Lastly, the stability analysis verifies that proposed method holds a high encryption quality status.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.160-163
• /
• 2003

This paper describes on anodic bonding characteristics of MLCA(Multi Layer Ceramic Actuator) to Si-wafer using evaporated Pyrex #7740 glass thin-films for MEMS applications. Pyrex #7740 glass thin-films with same properties were deposited on MLCA under optimum RF magneto conditions(Ar 100 %, input power $1\;/cm^2$). After annealing in $450^{\circ}C$ for 1 hr, the anodic bonding of MLCA to Si-wafer was successfully performed at 600 V, $400^{\circ}C$ in - 760 mmHg. Then, the MLCA/Si bonded interface and fabricated Si diaphragm deflection characteristics were analyzed through the actuation test. It is possible to control with accurate deflection of Si diaphragm according to its geometries and its maximum non-linearity is 0.05-008 %FS. Moreover, any damages or separation of MICA/Si bonded interfaces do not occur during actuation test. Therefore, it is expected that anodic bonding technology of MICA/Si wafers could be usefully applied for the fabrication process of high-performance piezoelectric MEMS devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.141-143
• /
• 2010

This paper presents a problem of the existing encryption method using MLCA or complemented MLCA and propose a method to resolve this problem. With the existing encryption methods, the result of encryption is affected by the original image because of spatial redundancy of adjacent pixels. In this proposed method, we transform spatial coordinates of all pixels into encrypted coordinates. We also encrypt color values of the original image by operating XOR with pseudo-random numbers. This can solve the problem of existing methods and improve the levels of encryption by randomly encrypting pixel coordinates and pixel values of original image. The effectiveness of the proposed method is proved by conducting histogram, key space analysis.