• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.627-635
• /
• 2015

We propose a dual-layer differential equal-gain codebook design methodology for LTE-Advanced(LTE-A), IEEE802.ac, and radar system having multiple transmit and receive antennas, and make computer simulations to evaluate its link-level performaces. M-ary phase shift keying constellation is used as its codeword elements to utilize low-cost power amplifiers at mobile stations. Especially, the proposed codebook can meet radar systems requirement for the high-powered equal-gain transmission property. Due to the temporal correlation of the adjacent channel, the proposed differential codebook can quantize only the differential information of the channel instead of the whole channel subspace, which virtually increase the codebook size to realize more accurate quantization of the channel. The proposed codebook has the same properties of LTE codebook that is, constant modulus, complexity reduction, and nested property. Computer simulations show that the proposed codebook performs better than the conventional 8-ary codebooks with the same amount of feedback information.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12C
• /
• pp.764-773
• /
• 2011

Despite enormous performance gain with multi-antenna transmission in the single cell environment, its gain diminishes out in the multi-cell environment due to interference. It is also very hard to solve the efficient downlink beamforming with low complexity in multi-cell environment. First, this paper shows that the asymptotically sum rate optimal downlink beamformings at low and high SNR are maximum ratio transmit (MRT) and zero forcing (ZF) beamforming in the multi-cell system, respectively. Secondly, exploiting the asymptotically optimal downlink beamforming, we develop simple two types of near optimal downlink beamforming schemes having the form of minimum mean squared error (MMSE) beamforming obtained from the dual uplink problem. For each type, three different subclasses are also considered depending on the computational complexity. The simulation results show that the proposed near optimum algorithms provide the trade-off between the complexity and the performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.112-120
• /
• 2010

In this paper, we propose semi-ML adaptive parallel QRDM (APQRDM) and iterative QRDM (AIQRDM) algorithms based on set grouping. Using the set grouping, the tree-search stage of QRDM algorithm is divided into partial detection phases (PDP). Therefore, when the treesearch stage of QRDM is divided into 4 PDPs, the APQRDM latency is one fourth of that of the QRDM, and the hardware requirements of AIQRDM is approximately one fourth of that of QRDM. Moreover, simulation results show that in $4{\times}4$ system and at Eb/N0 of 12 dB, APQRDM decreases the average computational complexity to approximately 43% of that of the conventional QRDM. Also, at Eb/N0 of 0dB, AIQRDM reduces the computational complexity to about 54% and the average number of metric comparisons to approximately 10% of those required by the conventional QRDM and AQRDM.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.818-823
• /
• 2016

Millimeter wave (mm-wave) communication systems provide high data rates owing to the large bandwidths available at mm-wave frequencies. Recently, analogue and digital combined beamforming, namely "hybrid beamforming" has drawn attentions owing to its ability to realize the required link margins in mm-wave systems. Taking into account the radio frequency (RF) hardware limitations, such as the analogue phase shifter gain constraint and the low resolution of the phase controller, we introduce an uplink hybrid beamforming system that includes discrete Fourier transform (DFT) based "fixed" analogue beamforming. We adopt a zero-forcing (ZF) multiple-input multiple-output (MIMO) equalizer to eliminate the uplink inter-user interferences. Moreover, to improve the sum-rate performances, we propose a transmit beam selection algorithm which makes the uplink effective channels, i.e., the beamformed channels, become near orthogonal. The effectiveness of the proposed beam selection algorithm was verified through numerical simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1A
• /
• pp.27-33
• /
• 2009

This paper proposes transmit power control techniques with fading channel prediction scheme based on recurrent neural network for high-speed mobile communication systems. The operation result of recurrent neural network which is derived interpretively solves complexity problems of neural network circuit, and channel gain of multiple transmit antenna is derived with maximum ratio combining(MRC) by using the operation result, and this channel gain control transmit power of each antenna. simulation results show that proposed method has a outstanding performance compared to method that is not to be controlled power based on channel prediction. Most of legacy studies are for robust receive technique of fading signals or channel prediction of fading signals limited low-speed mobility, but in open loop Power control, proposed channel prediction method decrease system complexity with removal of fading effect in transmitter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.931-937
• /
• 2004

This study examines the channel capacity of a multiple antenna system based on OFDM(Othogonal Frequency Division Multiplexing) when there are correlations among received signals in the frequency selective Rayleigh fading. As for a case that two transmitting and two receiving antennas are used, the channel capacity is derived as a function of correlation in a closed-form and the effect on channel capacity is analyzed when the mean value of the of received signal power is identical/ non-identical between the two receiving antennas. Analytical results show that the channel capacity decreases with the correlation coefficient of the received signals, and the decreasing rate is accelerated when the correlation coefficient of the received signals is greater than 0.7. In addition, the channel capacity reaches its peak when the received mean signal power of each branch is identical.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.301-306
• /
• 2010

In this paper, a SIT(Source Independent Tree) method for ray tracing is proposed to enhance the efficiency of tree construction with reuse of sub tree in urban environment, As the SIT method is applied, the decrease of the number of nodes for picocell and microcell simulations is 100 times. And 88~98 % of the total nodes are reused with change of location of signal source from an analysis of node reuse efficiency. Therefore the proposed SIT method is useful in performance enhancement of ray tracing, especially, for multiple antenna simulation like as MIMO system and cell planning.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1023-1030
• /
• 2012

The diversity techniques can benefit underwater acoustic communications when the distance between sensors is sufficiently apart, and this leads to the increases in the physical size of the communication system: thus it is very hard to practically use such systems in real-environments. Therefore, in this paper, we have collected data from real underwater cannel environments in order to analyze the usability of diversity combined with beamforming techniques. And we have estimated the fading characteristics from the measurement data, and analyzed the correlation coefficients using the estimated fading characteristics. After analyzing the estimated fading characteristics from the measurements data, we found out that by applying diversity techniques on the output signals from beamformers that perform beamforming from different multipath directions, we can reduce the distance between sensors and at the same time benefit from the diversity gain.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.289-294
• /
• 2014

In this paper, we investigate the user scheduling, transmit beamforming, and receive beamforming of uplink space division multiple access (SDMA) systems where multiple users are allowed to transmit their signal to a base station (BS) using the same frequency band simultaneously. The BS performs a receive beamforming using the predetermined pseudo-random pattern and select users with a specific criterion. Especially, in this paper, we propose the threshold-based transmit power control, in which a user decrease its transmit power according if its generating interference to other users's signal is larger than a predetermined threshold. Assuming that the TDD system is used, the channel state information (CSI) can be obtained at each user from pilot signals from the BS. Simulation results show that the proposed technique significantly outperforms the existing user scheduling algorithms.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.443-453
• /
• 2020

This study using the active vibration control technique attempts to alleviate numerically the airframe vibration of a UH-60A helicopter. The AVCS(Active Vibration Control System) is applied to reduce the 4/rev vibration responses at the specified locations of the UH-60A airframe. The 4/rev hub vibratory loads of the UH-60A rotor is predicted using the nonlinear flexible dynamics analysis code, DYMORE II. Various tools such as NDARC, MSC.NASTRAN, and MATLAB Simulink are used for the AVCS simulation with five CRFGs and seven accelerometers. At a flight speed of 158knots, the predicted 4/rev hub vibratory loads of UH-60A rotor excite the airframe, and then the 4/rev vibration responses at the specified airframe positions such as the pilot seat, rotor-fuselage joint, mid-cabin, and aft-cabin are calculated without and with AVCS. The 4/rev vibration responses at all the locations and directions are reduced by from 25.14 to 96.05% when AVCS is used, as compared to the baseline results without AVCS.