• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7C
• /
• pp.587-593
• /
• 2010

In this paper we design an irregular low-density parity-check (LDPC) code for multiple-input multiple-output (MIMO) system, using a simple extrinsic information transfer (EXIT) chart method. The MIMO systems considered are optimal maximum a posteriori probability (MAP) detector. The MIMO detector and the LDPC decoder exchange soft information and form a turbo iterative receiver. The EXIT charts are used to obtain the edge degree distribution of the irregular LDPC code which is optimized for the MIMO detector. It is shown that the performance of the designed LDPC code is better than that of conventional LDPC code which was optimized for either the Additive White Gaussian Noise (AWGN) channel or the MIMO channel.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.153-160
• /
• 2017

Recently, the demand has continued to increase for higher data rates and improved multimedia services through wireless internet access. In order to increase the data rate and link reliability, 3GPP LTE/A and IEEE 802.16e/m WiMAX systems incorporate MIMO transmission schemes. Since the hardware complexity increases with the number of transmit data streams and mobile devices have limited physical dimensions, an multiple input multiple output (MIMO) ystem with two antennas at both the transmitter and the receiver ($2{\times}2$) is considered to be a possible solution for mobile devices. In this paper, a low-complexity soft output MIMO symbol detector based on Modified-SQRD is proposed for mobile devices with two transmit and two receive antennas.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.3
• /
• pp.55-61
• /
• 2011

This paper presents an implementation of Lattice Reduction (LR)-aided detector for Multiple-Input Multiple-Output (MIMO) system using Graphics Processing Unit (GPU). GPU is a parallel processor which has a number of Arithmetic Logic Units (ALUs), thus, it can minimize the operation time of LR algorithm through the parallelization using multiple threads in the GPU. Through the implemented LR-aided detector, we verify that the LR-aided detector operates a lot faster than Maximum Likelihood (ML) detector. The implemented LR-aided detector has been applied to WiMAX system to show the feasibility of its real-time processing. In addition, we demonstrate that the processing time can be reduced at the cost of 3dB SNR loss by limiting the repeating loop in Lenstra-Lenstra-Lovasz (LLL) algorithm which is frequently used in LR-aided detector.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.3
• /
• pp.41-50
• /
• 2010

In this paper, an area-efficient symbol detector is proposed for MIMO communication systems with two transmit and two receive antennas. The proposed symbol detector can support both the spatial multiplexing mode and spatial diversity mode for MIMO transmission technique, and shows the optimal maximum likelihood (ML) performance. Also, by sharing the hardware block with multi-stage pipeline structure and using the complex multiplier based on polar-coordinate，the complexity of the proposed architecture is dramatically decreased. The proposed symbol detector was designed in hardware description language (HDL) and implemented with Xilinx Virtex-5 FPGA. With the proposed architecture, the number of logic slices for the proposed symbol detection is 52490 and the number of DSP48s (dedicated multiplier) is 52, which are reduced by 35.3% and 85.3%, respectively, compared with the conventional architecture.

• ETRI Journal
• /
• v.40 no.5
• /
• pp.570-581
• /
• 2018

This work analyzes the performance of implementable detectors for the multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) technique under specific and realistic operation system conditions, including antenna correlation and array configuration. A time-domain channel model was used to evaluate the system performance under realistic communication channel and system scenarios, including different channel correlation, modulation order, and antenna array configurations. Several MIMO-OFDM detectors were analyzed for the purpose of achieving high performance combined with high capacity systems and manageable computational complexity. Numerical Monte Carlo simulations demonstrate the channel selectivity effect, while the impact of the number of antennas, adoption of linear against heuristic-based detection schemes, and the spatial correlation effect under linear and planar antenna arrays are analyzed in the MIMO-OFDM context.

• ETRI Journal
• /
• v.30 no.6
• /
• pp.807-817
• /
• 2008

We present a low-density parity-check (LDPC)-based, threaded layered space-time-frequency system with emphasis on the iterative receiver design. First, the unbiased minimum mean-squared-error iterative-tree-search (U-MMSE-ITS) detector, which is known to be one of the most efficient multi-input multi-output (MIMO) detectors available, is improved by augmentation of the partial-length paths and by the addition of one-bit complement sequences. Compared with the U-MMSE-ITS detector, the improved detector provides better detection performance with lower complexity. Furthermore, the improved detector is robust to arbitrary MIMO channels and to any antenna configurations. Second, based on the structure of the iterative receiver, we present a low-complexity belief-propagation (BP) decoding algorithm for LDPC-codes. This BP decoder not only has low computing complexity but also converges very fast (5 iterations is sufficient). With the efficient receiver employing the improved detector and the low-complexity BP decoder, the proposed system is a promising solution to high-data-rate transmission over selective-fading channels.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.222-229
• /
• 2010

A conventional pseudorandom sequence generator creates only 1 bit of data per clock cycle. Therefore, it may cause a delay in data communications. In this paper, we propose an efficient implementation method for a pseudorandom sequence generator with parallel outputs. By virtue of the simple matrix multiplications, we derive a well-organized recursive formula and realize a pseudorandom sequence generator with multiple outputs. Experimental results show that, although the total area of the proposed scheme is 3% to 13% larger than that of the existing scheme, our parallel architecture improves the throughput by 2, 4, and 6 times compared with the existing scheme based on a single output. In addition, we apply our approach to a $2{\times}2$ multiple input/multiple output (MIMO) detector targeting the 3rd Generation Partnership Project Long Term Evolution (3GPP LTE) system. Therefore, the throughput of the MIMO detector is significantly enhanced by parallel processing of data communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.932-939
• /
• 2008

Recently lattice-reduction (LR) has been used in signal detection for multiple-input multiple-output (MIMO) systems. The conventional LR aided detection schemes are combinations of LR and signal detection methods such as zero-forcing (ZF) and minimum mean square error (MMSE) detection. In this paper, we propose the Lattice-Reduction-aided scheme based on extended noise variance matrix to search good candidate symbol set in quantization step. Then this scheme estimates transmitted symbol with Semidefinite Relaxation by candidate symbol set. Simulation results in a random MIMO system show that the proposed scheme exhibits improved performance and a slight increase in complexity.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.377-380
• /
• 2012

격자 감소 (lattice reduction) 알고리즘은 주어진 기저 벡터를 직교에 가까운 기저 벡터로 바꾸어 준다. 그중 대표적인 알고리즘으로 LLL (Lenstra, Lenstra & Lovasz) 알고리즘이 있다. 격자 감소 알고리즘을 이용하여 다중 안테나 입출력 (MIMO) 통신시스템의 선형 수신기(linear detector)의 성능을 향상 시킬 수 있다. 스피어 복호 알고리즘 (sphere decoding algorithm)은 MIMO 통신 시스템에서 사용되는 복호기중 최대 우도 복호기 (Maximum Likelihood Detector)와 비슷한 BER(bit error rate)성능을 가지고 복잡도를 줄일 수 있어서 많이 연구되어 왔다. 이때 스피어의 반지름의 설정이나 트리 검색 구조 방식 등은 복잡도에 큰 영향을 미친다. 본 논문에서는 LLL 알고리즘에 기반하여 스피어의 반지름 설정 및 트리 검색 노드 수를 제한하는 방식으로 스피어 복호 알고리즘의 복잡도를 기존 알고리즘에 비해 크게 낮추면서도 비트 오류률 (BER) 성능 열화를 최소한으로 한 알고리즘을 제안하고 전산 실험을 통해 검증한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1564-1572
• /
• 2004

UWB(Ultra Wide Band) under standardization for WPAN has a restriction in transmitting power because of interference with existing systems. To overcome the restriction, in this paper, we construct the MIMO(Multi-input-Multi-Output) channel using multi-transmit/receiver antennas and analyze the performance of the proposed system. In addition, through numerical simulation, we obtain the interference property among these antennas and analyze the effect of an interference to the system. The proposed UWB system has a ML detector and the least square method will be used to cancel the multi-user interference and the inter symbol interference caused by multipath.