• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.336-339
• /
• 2003

A digital data logging system has been developed for the purpose of a compact offline Ocean Bottom Seismometer(OBS). The Digital Data Logger(DDL) consists of A/D system, Micom with storage memory and firmware managing data files. The A/D system acquires data of 16bit/4ch with sampling rate of 250Hz per channel. The Micom, a micro controller board with T33521 processor of 8051 class, was equipped with 8 flash memories of 128MB for data storage capacity of 1GB. The firmware stores the acquiring data in form of binary files. The DDL was designated to be compact and light and to consume low energy as possible. The DDL is to interface with PC through USB(Universal Serial Bus). The performance of the DDL has been validated through tests with respect to a 3-axis seismometer.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.3
• /
• pp.13-20
• /
• 2011

In this paper, we proposed a system to raise gas safety management by using the wireless communication module and intelligent gas safety appliances. Our designed systems configure a micom-gas meter, an automatic extinguisher, sensors, and a wallpad. A micom-gas-meter monitors gas flow, gas pressure, and earthquake. An automatic fire extinguisher checks gas(combustible) leaks and temperature of $100^{\circ}C$ and $130^{\circ}C$. Sensors measure smoke and CO gas. In our novel system, a micom-gas meter cut off inner valve with warnings, an automatic fire extinguisher cut off middle valve and spray extinguishing materials, and sensors generate signals for smoke and CO when occurring gas risk. Gas safety appliances and sensors takes safety measures, and transmit those signal to a wallpad. The wallpad again transmit signal like events to a control server. Users can connect web pages for gas safety through B-ISDN and control and manage them. We hereby devised scenarios for gas safety and risk management, and demonstrated their effectiveness through experiments.

• Defense and Technology
• /
• no.4 s.74
• /
• pp.38-42
• /
• 1985

오늘날 선진국들은 그들의 첨단기술이 해외로 무단히 유출되는 것을 방지하기 위해, 그리고 개발도상국들은 그 첨단기술을 어떠한 수단으로든지 획득하기 위해 전력을 다하고 있다. 그러면 선진국중에서도 대표적 선진국인 미국은 과연, 국내외 기술이전에 관해서 어떠한 견해를 갖고 있으며, 어떠한 방책을 강구하고 있는지, 우리로서는 지대한 관심사가 아닐 수 없다. 여기에 미육군 유도탄사령부(MICOM)에서 기술이전의 특별참모직을 맡고 있는 Mr. Howard C, Race(예비역육군대령)의 논문을 번역 소개하니 참고하기 바란다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1067-1068
• /
• 2008

An inverter for driving flat fluorescent lamp(FFL) with various protection circuits using micro controller(Micom) is proposed in this paper. The inverter will be shut down if the fault operating conditions such as open lamp, over current and over voltage are detected.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.73-84
• /
• 2004

This paper suggests a new scalar multiplication algerian to resist SPA which threatens the security of cryptographic primitive on the hardware recently, and discusses how to apply this algerian Our algorithm is better than other SPA countermeasure algorithms aspect to computational efficiency. Since known SPA countermeasure algorithms have dependency of computation. these are difficult to construct parallel architecture efficiently. To solve this problem our algorithm removes dependency and computes a multiplication and a squaring during inversion with parallel architecture in order to minimize loss of performance. We implement hardware logic with VHDL(VHSIC Hardware Description Language) to verify performance. Synthesis tool is Synplify Pro 7.0 and target chip is Xillinx VirtexE XCV2000EFGl156. Total equivalent gate is 60,508 and maximum frequency is 30Mhz. Our scalar multiplier can be applied to digital signature, encryption and decryption, key exchange, etc. It is applied to a embedded-micom it protects SPA and provides efficient computation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.26-34
• /
• 2007

This Paper describes a chip design technique for body composition analyzer based on the BIA (Bioelectrical Impedance Analysis) method. All the functions of signal forcing circuits to the body, signal detecting circuits from the body, Micom, SRAM and EEPROMS are integrated in one chip. Especially, multi-frequency detecting method can be applied with selective band pass filter (BPF), which is designed in weak inversion region for low power consumption. In addition new full wave rectifier (FWR) is also proposed with differential difference amplifier (DDA) for high performance (small die area low power consumption, rail-to-rail output swing). The prototype chip is implemented with 0.35um CMOS technology and shows the power dissipation of 6 mW at the supply voltage of 3.3V. The die area of prototype chip is $5mm\times5mm$.

• Journal of the korean society of oceanography
• /
• v.32 no.1
• /
• pp.17-27
• /
• 1997

Miami Isopycnic Coordinate Ocean Model is applied to the East Sea to estimate the renewal time of the upper Intermediate Water The model gives about 10 years of renewal time. Extrapolating this result to the whole water mass below, including the upper Intermediate Water, leads to about 81.4 years of renewal time, which is quite comparable to that obtained by Kim and Kim (1997) based on the recent observations. Deep winter mixing occurs in the north of the basin. The areas of the largest water mass conversion, from the upper mixed to the intermediate below, are along the periphery of the deep mixing zone. Large portion of the renewed Intermediate Water then advects along the Korean and Japanese coasts. It is concluded that the high-oxygen content Intermediate Water found off the Korean coast (Kim and Chung, 1984) is in part locally formed but mostly advected from the deep mixing zone.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.53 no.4
• /
• pp.166-170
• /
• 2004

In this paper, it has been proposed the simultaneous control of PFC (power factor corrector) and electronic ballast for fluorescent lamp by one chip micro-controller. Boost DC-DC converter is adopted for PFC, and half bridge inverter for electronic ballast. It controls, simultaneously and independently, the boost DC-DC converter and the half bridge inverter. As PFC and electronic ballast are controlled by one chip micro-controller, it is possible to achieve the simpler and the cheaper controller for fluorescent lamp. Experimental results have shown the feasibility of the proposed simultaneous control of PFC and electronic ballast by one chip micro-controller.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.21-23
• /
• 2003

본 논문에서는 전원선로의 정전시나 입력전원에 이상 상태가 발생했을 때 정상적인 전원을 부하에 공급하는 마이컴과 GUI를 이용한 무정전 전원장치(Uninterruptible Power System : UPS)를 개발하였다. 본 논문에서 개발한 무정전 전원장치는 PIC16F877의 마이컴을 사용하였으며, 사용자가 편리하도록 하기 위해서 Visual C++를 이용하여 무정전 전원장치의 그래픽 사용자 인터페이스를 구현하였다.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.895-898
• /
• 2003

본 논문에서는 휴대폰에 사용하는 리튬-이론 배터리(Li-Ion battery)를 충전하기 위한 충전 IC 의 설계에 대해서 기술한다. 정전류(Constant Current)/ 정전압 (Constant Voltage) 방식을 이용하여 리튬-이론 배터리를 충전을 하였다. 이 충전 과정을 제어하기 위해서 일반적으로 사용되는 ADC, DAC 와 MICOM 을 사용하지 않고, hardwired control logic 을 이용하여 적은 면적을 가지고도 기존의 충전 과정을 수행하도록 하였다. 충전 IC 외부에 사용되는 저항들을 내부에 집적하여 사용하는 부품의 수를 현저히 줄였다. 충전기와 리튬-이온 배터리를 연결하는 선(wire)로 저항에 의한 전압강하(voltage drop)를 외부에서 보상할 수 있도록하여 리튬-이온 배터리가 가장 안정적인 전압인 4.2 V로 충전 될 수 있도록 하였다. 외부 온도 검사 블록에서 저항을 이용한 전압 분배를 사용하지 않고, 정전류원을 이용하여 외부 온도 변화를 측정할 수 있도록 하였다. 리튬-이온 배터가 전정류와 정전압으로 4.2 V로 충전 되었으며, 충전 IC 의 소비 전력은 37 mW(analog part)이다. 충전 IC는 0.6 ㎛ standard CMOS 공정을 이용하여 설계하였다.