• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.97-101
• /
• 2002

Recently, the need for transporting and manipulating minute amount of fluids in microscale channels (so-called micro-fluidics) has been increasing, especially in biotechnology and biochemical processing. This work demonstrates that the so-called mechano-chemical process which consists of mechanical abrasive action combined with chemical process can be used to f뮤ricate micro-fluidic channels more rapidly and cost effectively than other methods. In this work, capillary filling of fluids in micro-channels was investigated by theoretical approaches and experiments. From the experimental results, it is expected that a complex micro-fluidic system can be fabricated using the micro-fabrication technique and microsystem packaging method described in this work.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.994-1000
• /
• 2001

In this paper, using micro-stereolithography technology, I fabricated a liquid analyzer to measure ion concentration of a solution. Micro-stereolithography is a technology to fabricate 3-dimensional structure by applying laser beam on liquid photo-polymer. This technology makes it possible to do preassemble fabrication without any extra assembling step after the process. So, the liquid analyzer could be fabricated at very low cost with very simple process by micro-stereolithography technology. The liquid analyzer consists of a chamber for containing the solution, a pump using piezoelectric effect of PZT disk, a static mixer and a sensor for measuring ion concentration using Pt electrodes.

• 대한전자공학회논문지SD
• /
• 제47권11호
• /
• pp.1-5
• /
• 2010

본 논문에서는 외팔보 배열 구조를 가지는 MEMS 테스트 소켓을 SOI 웨이퍼를 이용하여 개발하였다. 외팔보는 연결부분의 기계적 취약점을 보완하기 위해 모서리가 둥근 형태를 가지고 있다. 측정에 사용 된 BGA IC 패키지는 볼 수 121개, 피치가 $650{\mu}m$, 볼 직경 $300{\mu}m$, 높이 $200{\mu}m$ 을 가지고 있다. 제작된 외팔보는 길이 $350{\mu}m$, 최대 폭 $200{\mu}m$, 최소 폭 $100{\mu}m$, 두께가 $10{\mu}m$인 곡선 형태의 외팔보이다. MEMS 테스트 소켓은 lift-off 기술과 Deep RIE 기술 등의 미세전기기계시스템(MEMS) 기술로 제작되었다. MEMS 테스트 소켓은 간단한 구조와 낮은 제작비, 미세 피치, 높은 핀 수와 빠른 프로토타입을 제작할 수 있다는 장점이 있다. MEMS 테스트의 특성을 평가하기 위해 deflection에 따른 접촉힘과 금속과 팁 사이의 저항과 접촉저항을 측정하였다. 제작된 외팔보는 $90{\mu}m$ deflection에 1.3 gf의 접촉힘을 나타내었다. 신호경로저항은 $17{\Omega}$ 이하였고 접촉저항은 평균 $0.73{\Omega}$ 정도였다. 제작된 테스트 소켓은 향 후 BGA IC 패키지 테스트에 적용 가능 할 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.871-874
• /
• 2004

Fabrication of a high-resolution shadow mask, or called nanostencil, is presented. This high-resolution shadowmask is fabricated by a combination of MEMS processes and focused ion beam (FIB) milling. 500 nm thick and 2x2 mm large membranes are made on a silicon wafer by micro-fabrication processes of LPCVD, photolithography, ICP etching and bulk silicon etching. Subsequent FIB milling enabled local membrane thinning and aperture making into the thinned silicon nitride membrane. Due to high resolution of FIB milling process, nanoscale apertures down to 70 nm could be made into the membrane.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.175-181
• /
• 2005

SiOB is an essential part of slim optical pickup, where the silicon mirror, LD stand, silicon PD are integrated and LD is flip chip bonded. SiOB is fabricated with bulk micromachining. Especially the fabrication of silicon wafer with stepped concave areas has many extraordinary difficulties. As a matter of fact, experiences and knowledges are rare in the fabrication of the highly stepped silicon wafer. The difficulties occurring in the integration of PD and SiOB, and highly stepped patterning, and silicon mirror roughness and how-to-solve will be discussed.

• 한국표면공학회지
• /
• 제47권6호
• /
• pp.362-367
• /
• 2014

We report the design, fabrication of a $Si_3N_4$ probe and calculation of its mechanical properties for DPN(dip pen nanolithography), which consists of dual tips. Concept of dual tip probe is to employ individual tips on probe as either an AFM tip for imaging or a writing tip for nano patterning. For this, the dual tip probe is fabricated using low residual stress $Si_3N_4$ material with LPCVD deposition and MEMS fabrication process. On the basis of FEM analysis we show that the functionality of dual tip probe for imaging is dependent on the dimensions of dual tip probe, and high ratio of widths of beam areas is preferred to minimize curvature variation on probe.

• 마이크로전자및패키징학회지
• /
• 제12권3호
• /
• pp.197-205
• /
• 2005

RF MEMS 기술에서 패키지의 개발은 매우 중요하다. RF MEMS 패키지는 소형화, hermetic 특성, 높은 RF 성능 및 신뢰성을 갖도록 설계되어야 한다. 또한 가능한 저온의 패키징 공정이 가능해야 한다. 본 연구에서는 저온 공정을 이용한 RF MEMS 소자의 hermetic 웨이퍼 레벨 패키징을 제안하였다. Hermetic sealing을 위하여 약 $300{\times}C$의 Au-Sn 공정 접합 (eutectic bonding) 기술을 사용하였으며, Au-Sn의 조합으로 형성된 sealing부의 폭은 $70{\mu}m$이었다. 소자의 전기적 연결을 위하여 기판에 수직 via hole을 형성하고 전기도금 (electroplating) 방법을 이용하여 Cu로 채웠다. 완성된 RF MEMS 패키지의 최종 크기는 $1mm\times1mm\times700{\mu}m$이었다. 패키징 공정의 최적화 및 $O_2$ 플라즈마 애싱 공정을 통하여 접합 계면 및 via hole의 void들을 제거할 수 있었다. 또한 패키지의 전단 강도 및 hermeticity는 MIL-STD-883F의 규격을 만족하였으며 패키지 내부에서 오염 및 기타 유기 물질은 발생하지 않았다. 패키지의 삽입 손실은 2 GHz에서 0.075 dB로 매우 작았으며, 여러 종류의 신뢰성 시험 결과 패키지의 파손 및 성능의 감소는 발견되지 않았다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권4호
• /
• pp.149-154
• /
• 2004

This paper presents a silicon probe tip for vertical probe card application. The silicon probe tip was fabricated using MEMS technology such as porous silicon micromachining and deep- RIE (reactive ion etching). The thickness of the silicon epitaxial layers was 5 ${\mu}{\textrm}{m}$ and 7 ${\mu}{\textrm}{m}$, respectively. The width and length were 40 ${\mu}{\textrm}{m}$ and 600 ${\mu}{\textrm}{m}$, respectively. The probe structure was a multilayered structure and was composed of Au/Ni-Cr/Si$_3$N$_4$/n-epi layers. The height of the curled probe tip was measured as a function of the annealing temperature and time. Resistance characteristics of the probe tip were measured using a touchdown test.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권1호
• /
• pp.11-16
• /
• 2005

This paper presents fabrication process and experimental results of two different types of flexible MEMS biosensors based on polymer/metal multilayer processing techniques. One type of a biosensor is a microelectrode array (MEA) for nerve signal monitoring through implanting the MEA into a living body, and another is a tactile sensor capable of being mounted on an arbitrary-shaped surface. The microelectrode array was fabricated and its electrical characteristics have been examined through in vivo and in vitro experiment. For sensitive skin, flexible tactile sensor array was fabricated and its sensitivity has been analyzed. Mechanical flexibility of these biosensors has been achieved by using a polymer, and it is verified by implanting a MEA to an animal and mounting the tactile sensor on an arbitrary-shaped surface.

• 한국정밀공학회지
• /
• 제33권7호
• /
• pp.601-606
• /
• 2016

In this paper, an energy harvester is developed that has advantages regarding piezoelectric noise minimization, mass production, and an easily available environmental energy source, electromagnetic induction, as well as low-frequency bandwidth and high amplitude. A process for fabricating a three-dimensional multilayered planar coil using micro-electro-mechanical systems (MEMS) on a flexible printed circuit board FPCB is introduced. Optimal shape and size were calculated via internal resistance and inductance, and a prototype was fabricated through the MEMS procedure while considering the possibility of mass production. Although the internal resistance matched the designed value, the electromotive force generated did not reach the intended amount. The main reason for the decrease in efficiency was the low area of coil outskirt exposed to the magnetic field while there was relative motion between the magnet and the coil.