• 통상정보연구
• /
• 제10권4호
• /
• pp.439-455
• /
• 2008

The SPS Agreement, concluded in the Uruguay Round for the purpose of controlling SPS risks, has traditionally been recognized to maintain the narrowest scope of application compared with TBT Agreement and GATT in relation with environmental provisions. Contrary to such an understanding on the scope of the SPS Agreement, the panel in the EC-Biotech case found that the SPS Agreement extends to regulate trade-restrictive measures on Genetically Modified Organizations(GMOs) causing health and environmental risks. This expanding scope of the SPS Agreement would have substantial influence on domestic environmental regulations as well as Multilateral Environmental Agreements(MEAs). This paper discusses the consequences of an expanding ambit for the WTO SPS Agreement through the designation of a wider range of health and environmental regulations affecting trade as SPS measures. As a result, not only precautionary measures on GMO risks, but also other health and environmental measures with trade impacts, could be subject to SPS control, and consequently, the institutional rigors of the WTO regime. However, strict and literal interpretation of the SPS provisions to expand its applicable scope would cause concerns about the WTO's intervention on the purely environmental measures. Pursuing harmonized and flexible interpretation of provisions on environment-related conflicts as well as accepting precautionary principle included MEAs will contribute to reduce such kind of concerns.

• Korean Membrane Journal
• /
• 제10권1호
• /
• pp.46-52
• /
• 2008

Optimization of ionomer solution was conducted in order to improve the performance of MEAs in PEMPC. The interface between membrane and electrodes in MEAs is crucial region determining fuel cell performance as well as ORR reaction at cathode. Through the modification of Nafion ionomer content at the interface between membrane and electrodes, an optimal content was obtained with Nafion 115 membranes. Two times higher current density was obtained with the outer Nafion sprayed MEA compared with the non-sprayed one. In addition, the symmetrical impedance spectroscopy mode (SM) exhibited that the resistances of membrane area, proton hydration, and charge transfer decreased as the outer Nafion is sprayed. From the polarization curves and SM, the highest current density and the lowest resistance was obtained at the outer ionomer content of $0.15\;mg\;cm^{-2}$.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.207-217
• /
• 2011

Electrode impedances are measured to quantitatively characterize the electrode-electrolyte or cell-electrode interfaces. In the case of high-density microelectrode arrays(MEAs) that have been developed for brainmachine interface applications, the characterization process becomes a repeating and time-consuming task; a system that can perform the measurement and analysis in an automated fashion with accuracy and speed is required. However, due to the large number of channels, parasitic capacitance and off-capacitance components of the switching system become the major factors that decreased the accuracy for the measurement of high impedance microelectrodes. Here we investigated the implementation of automatic impedance measurement system with analyzing the causes of possible measurement-related problems in multichannel switching configuration. Based on our multi-channel measurement circuit model, we suggest solutions to the problems and introduce a novel impedance measurement scheme using electro-mechanical relays. The implemented measurement system could measure |Z| < 700 $k{\Omega}$ of impedance in - 10% errors, which can be widely applicable to high density neural recording MEAs.

• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.585-591
• /
• 2011

This study has focused on the development of high performance membrane-electrode assemblies (MEAs) fabricated by decal method for proton exchange membrane fuel cell (PEMFC). To study the effect of ionomer contents on performance, we fabricated MEAs with several electrodes which were prepared by varying the quantity of ionomer from 20 wt.% to 45 wt.% in catalyst layer. The MEA performance was obtained through single cell test. The MEA prepared from electrode with 25wt.% of ionomer showed the best performance. We evaluated the surface area and pore volume of electrode with BET. We found that the surface area and pore volume in electrode decreased rapidly at the electrode with 40wt.% of ionomer in catalyst layer. MEA was fabricated by roll laminator machine and the roll laminating conditions for the preparation of MEA, such as laminating press, temperature and speed, were optimized. The MEA performance is not affected by laminating temperature and speed, but roll laminating press have a great effect on MEA performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.96-98
• /
• 2006

Proper water management is vital to achieve high performance and durability of PEFC (Polymer Electrolyte Fuel Cell). The effects of the residual water from PEFC after purge in shut-down processes on GDL/MEAs were investigated with freeze/thaw cycles Freeze/thaw cycle tests were conducted with single cells which were designed from transparent acryl plates. Single cells which contain several amount of residual water were cycles from $80^{\circ}C$ to $-28^{\circ}C$. The resistance changes of the single cells which have various amount of residual water were evaluated by ac-impedance analysis with 24 times of freeze/thaw cycles. Also, after the freeze/thaw cycles, the property changes were characterized by visual methods such as SEM, EPMA. Though it was difficult to observe noticeable property changes in the visual characterizations, the resistance of cells dramatically increased with the amount of remained water.

• The Journal of Korean Physical Therapy
• /
• 제23권2호
• /
• pp.37-43
• /
• 2011

Purpose: The purpose of this study was to determine the effects of chest resistance exercise on Forced Expiratory Volume per second and on fatigue in patients with chronic obstructive pulmonary disease (COPD). Methods: In all, 62 male patients with COPD were included in this study. The experimental group included 32 patients who were treated with chest resistance exercise using the PNF technique with medication. The control group included 30 patients who were treated only with medication. Subjects were stratified into the 2 groups by randomized clinical sampling. Before the start of the experiment, forced expiratory volume at the first second (FEV1) and lactic acid were tested in both experimental and control groups. The experimental group did chest resistance exercise for 6 weeks, 4 times per week, 30 min per day, and the effects of this exercise in patients with COPD was determined by comparing the results of FEV1 and lactic acid tests before and after the experiment between and within the experimental and control groups. Results: There was a statistically significant within group difference for FEV1 MEAS and FEV1 %PRED. There was statistically significant control group of FEV1 MEAS and FEV1 %PRED There was a statistically significant difference in the experimental group for fatigue, comparing scores before and after the test. There was a statistically significant control group of fatigue, in comparison of between the groups of FEV1 MEAS, FEV1 %PRED, fatigue(p<0.01)(p<0.05). Conclusion: More research on COPD will be necessary for improving pulmonary function and reducing fatigue. Further studies on COPD will be required for improving pulmonary function and reducing of fatigue.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1096-1101
• /
• 1992

In order tominimize fixing error of workpieces, circle, prismatic, sphere, cylindrical and sculptures types. Modification Rule by Indexing Table and Modification Rule by NC Program are developed for machining centers by using touch trigger probes. The Modification Rule by Indexing Table meas the alignment of workpiece to NC program through degree of freedoms of indexing table. The Modification Rule by NC Program is the alognment of NC program to workpiece ste-tp condition via the generation of NC progarm. A postprocessing module is alos developed for generating NC-part program(User Macro) to compensate for machining errors in end milling and boring processes. Developed method are verified by experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.451-453
• /
• 2012

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.456-457
• /
• 2012

• 한국표면공학회지
• /
• 제26권4호
• /
• pp.175-182
• /
• 1993

Electroless plating of nickel was studied electrochemically in the presence of complexing agents. Nickel sulfate solution with dimethylamine borance(DMAB) as the reducing agent was used. Effects of temperature pH, concentration and complexing agents-citric acid, EDTA, tartaric acid-were studied.Experimental meas-urements showed that the rate of electroless nickel deposition was closely related to electrochemical parame-ters such as temdperature, pH, concentration and the properties of complexing agets.