• Physical Therapy Korea
• /
• v.11 no.3
• /
• pp.85-90
• /
• 2004

The purpose of this study was to find the difference in muscle firing rate between each muscle according to the knee angle with the quadriceps femoris which is a representative action muscle of the lower extremity. Seven normal healthy subjects were recruited. The median frequency (MDF) of muscle contraction was recorded from vastus lateralis, vastus medialis, and rectus femoris muscles using the surface EMG, in 5 seconds, during maximal isometric knee extension. The data were analyzed by the two-way repeated ANOVA. The results of the study were as follows: 1) median frequency of muscle contraction was significantly higher at the vastus lateralis, vastus medialis, and rectus femoris in descending order. 2) median frequency of muscle contraction was significantly higher at the $30^{\circ}$, $60^{\circ}$, and $90^{\circ}$ in descending order. Consequently, muscle recruitment at the knee decreases the EMG activity of the lengthened muscle. This study suggests that the change in EMG activity at different muscle lengths resulted in affecting the muscle firing rate during the knee extension.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.236-245
• /
• 2011

Many researchers have recently studied multi-level formulation strategies to solve the MDO problems and they basically distributed the coupling compatibilities across all disciplines, while single-level formulations concentrate all the controls at the system-level. In addition, approximation techniques became remedies for computationally expensive analyses and simulations. This paper studies comparisons of the MDO methods with respect to computing performance considering both conventional sequential and modem distributed/parallel processing environments. The comparisons show Individual Disciplinary Feasible (IDF) formulation is the most efficient for sequential processing and IDF with approximation (IDFa) is the most efficient for parallel processing. Results incorporating to popular design examples show this finding. The author suggests design engineers should firstly choose IDF formulation to solve MDO problems because of its simplicity of implementation and not-bad performance. A single drawback of IDF is requiring more memory for local design variables and coupling variables. Adding cheap memories can save engineers valuable time and effort for complicated multi-level formulations and let them free out of no solution headache of Multi-Disciplinary Analysis (MDA) of the Multi-Disciplinary Feasible (MDF) formulation.

• Physical Therapy Korea
• /
• v.8 no.4
• /
• pp.31-43
• /
• 2001

19명의 건강한 성인 남자의 우세팔쪽 위팔두갈래근에서 피로가 생길 때까지 2.4초를 하나의 주기로 팔꿉을 반복적 등장성으로 굽히고 펴서 표면근전도 신호를 얻었다. 처리과정 A 중앙주파수(MDF )는 이 신호의 0.5초 구간을 power spectrum analy sis (PSA)로 계산하였는데 상당량의 잡음이 있었다. 중앙주파수의 잡음 양을 비교하기 위해, 동일한 표면근전도에서 3번까지 신호를 받았다 (2.4초 구간을 PSA로 계산한 처리과정 B, 13 point 로 moving averages한 처리과정 C, digital low pass filter한 처리과정 D). 그리고 나서 그 신호의 주요 주파수 성분을 뽑아내었다. 위의 중앙주파수 자료와 시간간의 회귀직선을 분석하면 초기 중앙주파수, 회귀기울기, 그리고 피로지수와 같은 모수를 얻을 수 있다. 비모수 검정의 하나인 Kendall 기법으로 네 개의 처리과정간의 모수를 비교하였다. 통계결과 잡음이 처리과정 A보다 B, C, D에서 적었고, D에서 가장 적게 나타났다. 중앙주파수를 digital low pass로 여과(filtering)함으로써 앞으로 있게 될 동적 운동 시 근피로 모니터기의 신뢰도를 높일 수 있다.

• Journal of Korea Game Society
• /
• v.10 no.4
• /
• pp.81-90
• /
• 2010

In this paper, an efficient method is proposed to produce photorealistic images of woven fabrics without empirical data such as the measured BRDFs(bidirectional reflectance distribution functions). The proposed method is applicable both to ray tracer based offline renderers and to realtime applications such as games. The proposed method models the reflectance properties of woven fabric with alternating anisotropy and deformed MDF(microfacet distribution function). The procedural modeling of the yarn structure effectively and efficiently reproduces plausible rendering of woven fabric. The experimental results show the proposed method can be successfully applied to photorealistic rendering of diverse woven fabric materials even in interactive applications.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.1-8
• /
• 2008

This study was performed to evaluate the burning characteristics of wood-based materials and the effect of surface treatment of fire retardant using cone calorimeter. Four types of wood-based materials, such as Plywood, Oriented Strand Board (OSB), Particle Board (PB) and Medium Density Fiberboard (MDF), were tested at a constant heat flux of $50kW/m^2$ to investigate the time to ignition, mass loss rate, heat release rate, effective heat of combustion, etc. In addition, each type of wood-based material was tested at the same heat flux after fire retardant treatment on the surface to evaluate the effect of this treatment on the burning characteristics. The surface treatment of fire retardant, by the amount of $110g/m^2$, delayed the time to ignition almost twice. However, it was indicated that heat release rate, mass loss rate, and effective heat of combustion were not significantly affected by fire retardants treatment for all types of wood-based materials.

• Earthquakes and Structures
• /
• v.3 no.5
• /
• pp.675-694
• /
• 2012

The 2008 Iwate-Miyagi Nairiku earthquake ($M_w$ 6.9, $M_{jma}$ 7.2) occurred on 14 June 2008 in Japan. The amplification and asymmetric waveform of the vertical acceleration at the ground surface recorded by accelerometers at station IWTH25, situated 3 km from the source, were remarkable in two ways. First, the vertical acceleration was extremely large (PGA = 38.66 $m/s^2$ for the vertical component, PGA = 42.78 $m/s^2$ for the sum of the three components). Second, an unusual asymmetric waveform, which is too far above the zero acceleration axis, as well as large upward spikes were observed. Using a multidegree-of-freedom (MDF) system consisting of a one-dimensional continuum subjected to vertical acceleration recorded at a depth of 260 m below ground level, the present paper clarifies numerically that these singular phenomena in the surface vertical acceleration records occurred as a result of the jumping and collision of a layer in vertical motion. We herein propose a new mechanism for such jumping and collision of ground layers. The unexpected extensive landslides that occurred in the area around the epicenter are believed to have been produced by such jumping under the influence of vertical acceleration.

• International Journal of Reliability and Applications
• /
• v.7 no.2
• /
• pp.177-186
• /
• 2006

Typical confidence intervals for a mean or mean residual life (MRL) are centered about the mean or mean residual life. We discuss novel confidence intervals that produce statements like "we are 95% confident that the MRL function, e(t), is greater than a prespecified $\mu_o$ for all t in the interval [0, $\hat{\theta})$)" where $\hat{\theta}$ is determined from the sample data, confidence level, and $\mu_o$. Also, we can have statements like 'we are 95% confident that the MRL of population 1, namely $e_1$(t), is greater than the MRL of population 2, $e_2$(t), for all t in the interval [0, $\hat{\theta}$)" where $\hat{\theta}$ is determined from the sample data and confidence level. We illustrate these one and two sample confidence intervals on internal bonds (tensile strengths) for an important modem engineered wood product, called medium density fiberboard (MDF), used internationally.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.47-53
• /
• 2009

To know the effect of smells from eco-friend and existing interior construction materials to human response, EEG of subjects' were measured. EEG signals were measured from 8 electrodes according to the international 10-20 system (Fp1, Fp2, F3, F4, Fc3, Fc4, P3, P4) from 10 healthy subjects in seven odor construction material. Followings are results. When stimuli of smell were suggested, non-stimuli pattern of ${\alpha}$-wave is largely in right occipitallobe part and rare in frontallobe part respectively. In case of eco-friend materials' smell, there is a activation of EEG in right occipitallobe part for every stimuli. But in case of eco-friend paint and Hwang-to, ${\alpha}$-wave is appeared in most part of brain even in frontallobe part. Especially for wet cedar case, activation of brain is very positive in right occipitallobe part and in frontallobe part. When comparing the normalized sensitivity of ${\beta}$-wave which appears in negative response, the preference ratio order is like this. Normal paint ${\rightarrow}$ MDF ${\rightarrow}$ Eco-friend paint ${\rightarrow}$ Gypsum board ${\rightarrow}$ Cedar ${\rightarrow}$ Wet cedar ${\rightarrow}$ Hwang-to.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1815-1820
• /
• 2017

In this paper, a study was conducted to estimate the maximum muscle strength which is a standard for selecting exercise intensity in weight training. We designed a device that estimates the muscle fatigue from the EMG signal, expecting to show a correlation between peak muscle strength and fatigue. Curl - Dumbbell was performed using a 4 kg dumbbell and the frequency change of the EMG was observed. At this time, the designed device acquires the signal using the MCU and finally Matlab was used to confirm the change in the center frequency value. The results of 10 subjects were analyzed using SPSS regression analysis. The statistical results showed a correlation of $R^2$ 0.583 and Significant probability of 0.010, and the relation of Y = 8.144-2.097 (slope (MDF)) was obtained. In conclusion, if the wearable device is manufactured in the form of a wearable device and the user can recommend the exercise intensity, the system will be able to retry the more efficient exercise.

• Journal of Veterinary Science
• /
• v.23 no.3
• /
• pp.37.1-37.8
• /
• 2022

Background: Avian pathogenic Escherichia coli (APEC) causes colibacillosis, resulting in significant economic losses in the poultry industry. Objectives: In this study, the molecular characteristics of two extended-spectrum beta-lactamase (ESBL)-producing APEC isolates were compared with previously reported ESBL-producing E. coli isolates. Methods: The molecular characteristics of E. coli isolates and the genetic environments of the ESBL genes were investigated using whole genome sequencing. Results: The two ESBL-producing APEC were classified into the phylogenetic groups C and B1 and ST410 and ST162, respectively. Moreover, the ESBL genes of the two isolates were harbored in different Inc plasmids. The EC1809182 strain, harboring the bla_CTX-M-55 gene on the plasmid, exhibited extensive homology to IncFIB (98.4%) and IncFIC(FII) (95.8%). The EC1809191 strain, harboring the bla_CTX-M-1 gene, was homologous to IncI1-I (Gamma) (99.3%). All chromosomes carried the multidrug transporter, mdf(A) gene. Mobile genetic elements, adjacent to CTX-M genes, facilitated the dissemination of genes in the two isolates, analogous to other ESBL-producing E. coli isolates. Conclusions: This study clarifies the transmission dynamics of CTX-M genes and supports strengthened surveillance to prevent the transmission of the antimicrobial-resistant genes to humans via the food chain.