• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.2051-2057
• /
• 2011

Several studies have demonstrated that nanoparticles (NPs) have toxic effects on cultured cell lines, yet there are no clear data describing the overall molecular changes induced by NPs currently in use for human applications. In this study, the in vitro cytotoxicity of three oxide NPs of around 100 nm size, namely, mesoporous silica (MCM-41), iron oxide ($Fe_2O_3$-NPs), and zinc oxide (ZnO-NPs), was evaluated in the human embryonic kidney cell line HEK293. Cell viability assays demonstrated that 100 ${\mu}g/mL$ MCM-41, 100 ${\mu}g/mL$ $Fe_2O_3$, and 12.5 ${\mu}g/mL$ ZnO exhibited 20% reductions in HEK293 cell viability in 24 hrs. DNA microarray analysis was performed on cells treated with these oxide NPs and further validated by real time PCR to understand cytotoxic changes occurring at the molecular level. Microarray analysis of NP-treated cells identified a number of up- and down-regulated genes that were found to be associated with inflammation, stress, and the cell death and defense response. At both the cellular and molecular levels, the toxicity was observed in the following order: ZnO-NPs > $Fe_2O_3$-NPs > MCM-41. In conclusion, our study provides important information regarding the toxicity of these three commonly used oxide NPs, which should be useful in future biomedical applications of these nanoparticles.

• Microbiology and Biotechnology Letters
• /
• v.37 no.1
• /
• pp.62-68
• /
• 2009

The culture conditions to maximize the production of laccase (EC 1.10.3.2) from Fomitopsis pinicola mycelia were investigated. Among the tested media for the enzyme production, mushroom complete medium (MCM ; 2% dextrose, 0.2% peptone, 0.2% yeast extract, 0.05% $KH_2PO_4$, and 0.05% $MgSO_4{\cdot}7H_2O$) showed the highest activity of the enzyme. To optimize the culture condition for the laccase activity, influence of various carbon and nitrogen sources was investigated in MCM. Among various carbon and nitrogen sources, 2% glucose and 0.4% peptone showed the highest production of the enzyme, respectively. For the phosphorus and inorganic source, 0.05% $NaH_2PO_4$ and 0.05% $CaCl_2$ were best for the enzyme activity. The enzyme production was reached to highest level after the cultivation for 8 days at $25^{\circ}C$. Native polyacrylamide gel electrophoresis (PAGE) followed by the laccase activity staining using 2, 2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as the substrate was performed to identify the laccase under culture conditions studied. Zymogram analysis of the culture supernatant showed a laccase band with molecular mass of 52 kDa. The optimum pH and temperature for the enzyme activity were $80^{\circ}C$ and pH 3.0.

• Journal of Mushroom
• /
• v.13 no.3
• /
• pp.270-273
• /
• 2015

Hypsizigus marmoreus is commercially the most important edible mushroom in Japan. This mushroom is usually cultivated for a longer period (about 85~120 days) than other mushroom. In order to develop a new cultivar that has a shortened cultivation period, the genome analysis of this strain has been considered. This study aims to obtain parental monokaryotic strains reproducing 'Haemi' cultivar in Hypsizigus marmoreus for reference genome sequencing. The mycelia were cultured in MCM and MYG media for various incubation periods. Homogenized mycelia were treated with commercial cell wall degrading enzymes to maximize protoplasts production yield from Hypsizigus marmoreus. The greatest number of protoplasts was obtained from mycelia cultured in MCM media for 3 days using Novozyme enzyme. The isolated protoplasts were grown in regeneration agar media after two weeks. Regenerated colonies were picked and moved on separated dishes for microscopic observation. Neohaplonts regenerated from dikayotic strains were identified by the absence of clamp connections. We confirmed that one of monokaryotic strains is a parental strain by crossing with an original compatible strain of 'Haemi' cultivar. This parental strain will be used for reference genome sequence analysis.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.633-640
• /
• 2011

After Ganoderma lucidum was cultured in mushroom complete medium (MCM) supplemented with ginseng extract (GE), crude polysaccharide (GL-GE-CP) was fractionated from mycelium. Among GL-GE-CP from mycelium in MCM supplemented with 5, 10, and 15% GE (v/v ratio of MCM to GE), GL-GE-15-CP (15% GE) most significantly enhanced macrophage stimulation and intestinal immune system modulating activity compared with GL-CP in MCM without GE. When GL-GE-15-CP was further fractionated on DEAE-Sepharose CL-6B, GL-GE-15-CP-II displayed more potent activity than subfractions from GL-CP on macrophage stimulation, interleukin-12 production, and intestinal immune system modulation (1.75-, 5.68-, and 1.76-fold, respectively). Anti-metastasis effect against colon 26-M3.1 carcinoma cells was also enhanced by GL-GE-15-CP-II (72.8% inhibition). In addition, GL-GE-15-CP-II contained neutral sugar (83.00%) and uronic acid (9.11%), and consisted of Ara, Man, Gal and Glc (molar ratio of 0.39:0.50:0.75:1.00). Furthermore, GE supplementation helped to enhance the immunomodulation in G. lucidum, and it is assumed that neutral polysaccharides play an important role.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.3
• /
• pp.34-42
• /
• 1997

This paper presents new fuzzy learning algorithms and their applications to time series prediction. During generating fuzzy rules from numerical data, there is a tendency to produce conflicting rules which have same premise but different consequence. To resolve the problem, we propose MCM(Modified Center Method) which is proven to reduce the error in the prediction. We have applied MCM to the analysis of Mackey-Glass time series and Gas Furnace da.ta to verify its efficiency.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.17-22
• /
• 2001

Practical implementation of the SFQ technology in most application requires more than single-chip-level circuit complexity. Multiple chips have to be integrated with a technology that is reliable at cryogenic temperatures and supports an inter-chip data transmission speed of tens of GHz. In this work, we have studied two basic issues in building large RSFQ circuits. The first is the reliable inter-chip SFQ pulse transfer technique using Multi-Chip-Module (MCM) technology. By noting that the energy contained in an SFQ pulse is less than an attojoule, it is not very surprising that the direct transmission of a single SFQ pulse through MCM solder bump connectors can be difficult and an innovative technique is needed. The second is the recycling of the bias currents. Since RSFQ circuits are dc current biased the large RSFQ circuits need serial biasing to reduce the total amount of current input to the circuit.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.419-423
• /
• 2008

The present study examined the effects of different calcium (Ca) sources and concentrations on the growth and Ca absorption of Agrocybe cylindracea mycelia grown in submerged cultures. The dry weights of the mycelia were not significantly different (significance level of 5%) according to the type of Ca added, and increased with increasing Ca concentration until 500 mg/L, and then decreased at concentrations of 1000 mg/L or greater. The Ca contents of groups were significantly different according to the various concentrations of the Ca source, in which the Ca content of the control group cultured without added Ca was 198.3 mg/kg, and in the treatment groups, Ca content increased to a minimum of 273.7 mg/kg (1.4 times) and a maximum of 67246.0 mg/kg (339.1 times) the Ca contents of the groups generally increased with increasing Ca concentration. According to the number of culture days, growth rates were highest during days 8 through 12, and remained relatively high until day 16. In addition, Ca contents per unit dry weight were higher in young mycelia with a shorter culture period than in mature mycelia with a longer culture period. According to pH, the most active growth and highest Ca content occurred in MCM liquid medium at pH 7.0. In conclusion, in order to produce Agrocybe cylindracea mycelia with high Ca content, it is considered most efficient to culture them in MCM liquid medium without a pH adjustment and containing 1,000 mg/L of Ca-lactate, which is commonly used as a Ca additive in food, as well as to use mycelia between 12-16 days of culturing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.104-104
• /
• 2018

이수안전도의 기준이 되는 갈수량에 대해 기후변화 시나리오에 따른 전망을 제시하였다. 충주 댐 유역을 대상으로 기준기간(1986~2000년)에서의 기상청의 관측 기상자료와 IPCC 보고서의 RCP 4.5/8.5 시나리오를 대상으로 CMIP5(Coupled Model Intercomparison Project Phase 5)에서 제공하는 기후변화 자료 중 5개의 모델(ACCESS1.3 CanESM2, CNRM-CM5, GFDL-ESM2G, HadGEM2-AO)의 기준기간과 미래기간(2011~2100년)의 기상자료를 수집하였다. 기후변화 자료는 정상성/비정상성 분위사상법과 베이지안 모델 평균기법을 통해 불확실성과 통계적 오차를 저감하였다. 미래기간에서, 강우는 RCP 4.5에서 1.74mm/year, RCP 8.5에서 3.22mm/year, 실제증발산은 RCP 4.5에서 1.09mm/year, RCP 8.5에서 1.78mm/year의 증가율을 보였다. 실제증발산을 입력자료로 활용할 수 있도록 IHACRES모델의 CMD(Catchment Moisture Deficit) 비선형 모듈의 매개변수를 변이하여 유효강우량 산정 과정을 개선하였다. 기준기간에서 관측유량자료와 IHACRES의 시뮬레이션을 통해 산정된 유량자료의 R-squared는 0.65이다. 기준기간에서의 매개변수를 고정하여 미래기간의 유량을 산정하고 유황분석을 통해 갈수량 전망하였다. 유량은 RCP 4.5에서 4.41MCM/year, RCP 8.5에서 9.66MCM/year의 증가율을 보였다. 갈수량은 RCP 4.5에서 0.30MCM/year, RCP 8.5에서 -0.47MCM/year의 증감율을 보였다. 연간 강수량 대비 실제증발산의 비율의 추세분석 결과, RCP 4.5에서는 홍수기에는 0.014%/year, 비홍수기에는 0.027%/year의 증가율을 보이며 거의 변화가 없는 추세를 확인할 수 있었다. RCP 8.5의 홍수기에는 -0.042%/year, 비홍수기에서는 0.167%/year의 증감율을 보이며 홍수기에는 실제증발산에 비해 강수량의 증가가 확연히 보였으며 비홍수기에는 강수량에 비해 실제증발산의 증가가 뚜렷이 확인되었다. RCP 8.5에서 비홍수기의 강수량 대비 실제증발산의 증가가 갈수량의 감소로 반영된 것을 확인할 수 있었다. 미래기간의 RCP 4.5/8.5에서 실제증발산의 증가로 인하여 강수량이 증가함에 따라 유입량이 증가함에도 불구하고 갈수량의 증가로 이어지지 않았다. 미래 갈수량의 감소는 하천의 건전성과 이수안전도의 위협이 될 수 있다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.5
• /
• pp.737-748
• /
• 1995

In this paper, we studyed the variables in the design of multichip memory modules with 4M$\times$1bit DRAM chips to construct high capacity and high speed memory modules. The configuration of the module was 8 bit, 16 bit, and 32 bit DRAM modules with employing 0.6 W, 70 nsec 4M$\times$1 bit DRAM chips. We optimized routing area and wiring density by performing the routing experiment with the variables of the chip allocation, module I/O terminal, the number of wiring, and the number of mounting side of the chips. The multichip module was designed to be able to accept MCM-L techiques and low cost PCB materials. The module routing experiment showed that it was an efficient way to align chip I/O terminals and module I/O terminals in parallel when mounting bare chips, and in perpendicular when mounting packaged chips, to set module I/O terminals in two sides, to use double sided substrates, and to allocate chips in a row. The efficient number of wiring layer was 4 layers when designing single sided bare chip mounting modules and 6 layers when constructing double sided bare chip mounting modules whereas the number of wiring layer was 3 layers when using single sided packaged chip mounting substrates and 5 layers when constructing double sided packaged chip mounting substrates. The most efficient configuration was to mount bare chips on doubled substrates and also to increase the number of mounting chips. The fabrication of memory multichip module showed that the modules with bare chips can be reduced to a half in volume and one third in weight comparing to the module with packaged chips. The signal propagation delay time on module substrate was reduced to 0.5-1 nsec.

• Journal of Sensor Science and Technology
• /
• v.22 no.3
• /
• pp.181-184
• /
• 2013

Highly ordered porous materials having mesopores in the walls of macropores showed improved adsorption dynamics results for VOC molecules, especially bulky molecules. These meso/macroporous mataerials were synthesized by the dual templating method, and mesopore and macropore size were controlled by adjusting the templates for each pore size regime. In the case of adsorption and desorption of small VOC molecules (toluene), although meso/macroporous MCM-41 with smaller mesopore size showed improved results, meso/macroporous SBA-15 with larger mesopore size was not improved regardless of the existence of macropores, since there was no limitation of movement through the larger mesopore. However, the adsorption dynamics of bulky VOC molecules (p-xylene) over meso/macroporous SBA-15 were drastically improved by increasing the macropore size.