• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.528-528
• /
• 2012

Recently, atmospheric pressure plasmas attract lots of interests for the useful applications such as surface modification and bio-medical treatment. In this study, a particle-in-cell Monte Carlo collision (PIC-MCC) simulation was adopted to investigate the discharge characteristics of a planar micro dielectric barrier discharge (DBD) with a driving frequency from 13.56 MHz to 162.72 MHz and with a gap distance of 80 micrometers. The variation of frequency, in the change in the electron energy probability function (EEPF). Through the relation between the ion trajectories and the frequency, results in the change of EEPFs is achievable with the turning point of frequency mode. Therefore, it is possible to categorize the efficient operation range of DBDs for its applications by controlling the interactions between plasmas and neutral gas for the generation of preferable radicals.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.5
• /
• pp.275-280
• /
• 2007

A rapidly disintegration famotidine tablet formulation in the oral cavity was developed using microcrystalline cellulose (MCC) and low-substituted hydroxypropyl cellulose (L-HPC), or additionally cropovidone as an internal disintegrant. Effects of disintegrants on the disintegration time in vitro and hardness were evaluated. Average wetting time of the tablets prepared in scale-up manufacturing process was less than 15 sec. Among the formulations tested, the tablet prepared with crospovidone as an internal disintegrant and Emcocel $90M^{(R)}$ as an external disintegrant showed fastest disintegration. These results may suggest that crospovidone and Emcocel $90M^{(R)}$ possessed excellent wetting nature, which result in the rapid disintegration of tablet.

• Geomechanics and Engineering
• /
• v.20 no.2
• /
• pp.147-154
• /
• 2020

A novel approach for predicting lateral displacement caused by pile installation in anisotropic clay is presented, on the basis of the cylindrical and spherical cavities expansion theory. The K₀-based modified Cam-clay (K₀-MCC) model is adopted for the K₀-consolidated clay and the process of pile installation is taken as the cavity expansion problem in undrained condition. The radial displacement of plastic region is obtained by combining the cavity wall boundary and the elastic-plastic (EP) boundary conditions. The predicted equations of lateral displacement during single pile and multi-pile installation are proposed, and the hydraulic fracture problem in the vicinity of the pile tip is investigated. The comparison between the lateral displacement obtained from the presented approach and the measured data from Chai et al. (2005) is carried out and shows a good agreement. It is suggested that the presented approach is a useful tool for the design of soft subsoil improvement resulting from the pile installation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.2
• /
• pp.211-219
• /
• 1988

In this paper effective block matching algorithms are proposed to find the motion vector. There are two approaches to the estimation of the motion vector in MCC (motion compensated coding), i.e.pel(pixel element) recursive algorithm and block matching algorithm. The search algorithm in this paper is based on the block matching method. The advantage of this algorithm is the reduction of the computation time. In order to reduce the computation time, three mathods are proposed in this paper. These new algorithms are faster than other methods. Compared with the three step algorithm by Koga et al., the average ratio of the computational savings obtained from the proposed algorithm is about 3-4.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.7-14
• /
• 2001

구조물 하중에 의한 점성토 지반의 침하량을 보다 정확하게 평가하기 위해서는 지반 내의 흙요소가 경험하는 실제적인 응력경로와 이에 따른 변형양상이 적절하게 고려되어야만 한다. 따라서 본 연구에서는 축대칭 조건의 다양한 응력경로를 따라 발생하는 정규압밀 점성토의 변형 거동을 고찰한 기존의 실험적 연구결과를 바탕으로 응력경로법에 근거한 보다 간편하고 합리적인 침하량 평가기법을 제시하였다. 또한 본 연구에서는 제시된 평가기법을 기존의 1차원적인 침하량 평가기법들과 함께 실제와 유사한 조건을 가지는 가상지반의 침하량 산정에 적용해 보았으며, 동일한 조건에 대해 소성모델(MCC 모델)과 혼합압밀이론에 바탕을 둔 유한요소해석을 실시하였다. 그리고 이를 통해 얻어진 결과들을 비교.분석함으로써 기존 평가기법들의 문제점과 한계를 명확히 제시하였으며, 응력증분 평가방법이 침하량 평가에 미치는 영향을 분석하였다.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.58-63
• /
• 2009

In this paper, the power loss due to PV module mismatch in PV string is analyzed and a mismatch compensation method is proposed to improve the efficiency of PV system. The analysis of mismatch loss using PV model simulation reveals that the mismatch module may decrease the total efficiency because the MPPT function of power conditioner make the PV system operate at the local maximum point. The mismatch loss can be severe if the maximum power point current of mismatch module is less than that of string. The proposed compensation method which is simply implemented with a buck type converter shows the possibility to remove the mismatch loss. The effectiveness of the analysis and compensation method is verified by a prototype experiment.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.2
• /
• pp.39-43
• /
• 2008

Productivity is one of the performance indices of the semiconductor equipment in manufacturing viewpoint. Among many ways tried and adopted for improvement of the productivity of the FAB equipment, variation of equipment configuration was considered and its effect on the throughput was analyzed. Parallel machine cycle charts that were generated based on the equipment log were used in the analysis. Efficiency of the equipment due to change of the structure and the probability of the usage in the manufacturing process were examined. The results showed that the modification of the control algorithm in the equipment and the redistribution of the process time for each process and transfer module along to the change in the structure enhance the throughput of the equipment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.369-372
• /
• 1997

Wire Ion Plasma Source (WIPS) is a plasma device which has a thin wire anode, a coaxially-set cylindrical cathode and electrodes located in both ends of the cylinder. The potential between the anode and cathode changes logarithmically by this electrode configuration. This electrode configuration enables high-density plasma to produce even at a low anode voltage. Since the electrode configuration is axially symmetric and long. plasma with axially uniform number density can be produced. Using particle-in-cell(PIC) and Monte Carlo collision(MCC), we investigate the traiectory of electrons and the characteristics of D.C. discharge in Wire ton Plasma Source.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.179.1-179.1
• /
• 2013

Cylindrical Rotating Magnetron Sputtering Cathode (이하 Rotary Cathode)는 기존에 사용 되던 rectangular type 보다 Target 사용 효율이 높다는 큰 이점을 가지고 있다. 높은 Target 사용 효율은 비용 절감 효과와 직접적으로 관련 된다. 이번 연구는 3D Plasma simulation(PIC-MCC)을 통한 Target 사용 효율 80% 이상의 Rotary Cathode 개발을 목적으로 한다. Plasma simulation에 External Magnetic fields를 접목하여 Electron의 이동 궤적을 제어하였고, 생성된 Ion (Ar+)의 밀도 및 속도로 Plasma의 안정성과 Erosion 계산 구간을 선정 하였다. Target Erosion Profile은 Sputtering yield Data와 Target에 충돌한 Ion 정보를 사용하여 산출 하였으며, Sputtered Particles의 Deposition Profile은 계산된 Target Erosion Profile과 The cosine law of emission을 이용하여 계산 하였다. 실험 조건은 Plasma simulation의 초기조건 바탕으로 하여 2G size의 ITO Target을 대상으로 실험 하였다. 비 Erosion 영역 최소화하기 위해 Magnet Length를 변경하여 제작 적용 하였다. Simulation 계산 시간의 제약으로 인하여 simulation에서 생성된 최대 이온 밀도는 일반적으로 알려진 값 보다 적게 계산 되었지만, Simulation으로 예측한 Erosion Profile 및 Deposition Profile은 실험 값과 유사한 형태를 나타났으며, 실험 결과는 Target 사용 효율 80%이상의 결과를 보였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.494-496
• /
• 2015

개인의 의료 정보는 개인의 프라이버시에 관련되므로 민감하게 취급되어야 하는 정보이다. 이러한 개인정보 유출은 유출된 정보의 해당 당사자의 사회적 고립과 정보의 질에 따라 당사자의 생명도 위협하게 되므로 철저한 판리가 필요하다. 따라서 의사, 간호사, 환자, 일반인 등의 사용자 식별을 통해 병원 기록의 접근 통제 및 사용 권한에 따른 정보의 암호화 수준과 해당 정보에 특화된 역할기반 접근제어(Role-Based Access Control)를 제정해야 한다. 환자 자신이 자신의 의료정보를 특정한 사람에게 접근 권한을 주어 확인할 수도 있게 하고 그 외의 다른 부분들도 제어 할 수 있게 권한을 부여 할 수 있어야 한다. 본 논문은 현재 의료 및 진찰 정보 관리를 위해 RBAC모델을 기반으로 의료정보보호를 위한 접근제어 방법을 분석하고 각 정보의 객체들과 사용자 간의 효율적인 역할 분담과 한계를 통해 의료 정보의 보호방안을 고찰한다.