• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.3
• /
• pp.533-543
• /
• 2018

In this paper, we propose an MILP-based method for Optimal Probability of Bit-based Differential Characteristic in SP(Substitution-permutation) ciphers based on Automatic Differential Characteristic Searching Method of Sasaki, et al. In [13], they used input/output variables and probability variables seperatably, but we simplify searching procedure by putting them(variables) together into linear inequalities. Also, In order to decrease the more linear inequalities, we choose Espresso algorithm among that used by Sasaki, et al(Quine-McCluskey algorithm & Espresso algorithm). Moreover, we apply our method to GIFT-64, GIFT-128, SKINNY-64, and we obtained results in the GIFT(Active S-boxs : 6, Probabilities : $2^{-11.415}$) compared with the existing one.(Active S-boxs : 5, Probabilities : unknown). In case of SKINNY-64, we can't find better result, but can find same result compared with the existing one.

• Journal of Life Science
• /
• v.30 no.3
• /
• pp.230-238
• /
• 2020

Carcass traits are the most economically important traits in Hanwoo (Korean cattle). Recently, the development of the field of genomics has made it possible to identify DNA markers for the genetic evaluation of carcass and meat quality traits in beef cattle. The objective of this study was to assess the genetic effects of single nucleotide polymorphism (SNP) markers related to carcass traits by field evaluations in a commercial Hanwoo population. We evaluated 15 SNP markers (TG g.371T>C, APM1 g.1454G>A, FABP4 g.2834C>G, FABP4 g.3533T>A, FABP4 g.3691G>A, SCD g.10153A>G, SCD g.10329T >C, CPE g.601T>C, EDG1 g.166A>G, NPY g.4271T>C, GPD1 g.2766C>T, PDE1B g.17122A>G, PDE1B g.17507A>C, TNNT1 g.6650C>T, and RORC g.20152A>G) related to carcass traits in Hanwoo. Genotyping of these SNP markers was performed using PCR-RFLP analysis in Hanwoo steers (n = 1,536) to evaluate their association with carcass traits. Seven SNPs, APM1 g.1454G>, FABP4 g.3691G>A, SCD g.10153A>G, CPE g.601T>C, PDE1B g.17122A>G, TNNT1 g.6650C>T, and RORC g.20152A>G, were significantly associated with carcass traits such as marbling score (MS), backfat thickness (BF), musculus longissimus dorsi area (LDA), carcass weight (CW), meat grade (MG), meat color (MC), and maturity score (MA). The results suggest that these SNPs may be used as DNA markers for the selection of Hanwoo with higher meat quality.

• Agricultural and Biosystems Engineering
• /
• v.3 no.2
• /
• pp.59-64
• /
• 2002

Odor generated during composting of livestock manure is mainly due to ammonia emission. Biofiltration is a desirable method to control composting odor. This study was conducted to analyze the efficiency of using fresh compost as a biofilter. A mixture of cattle manure and recycled compost was composted in a bin equipped with a suction-type blower. The exhaust gas was filtered through the fresh compost. Residence time was controlled by the flow rate of exhaust gas and the depth of filtering materials. At the aeration rate of 30 L/min(experiment I), ammonia reduction rate varied from 100% to -15% for biofilter A(residence time 56.5 s) and almost 100% for biofilter B(residence time 113 s). At the aeration rate of 30 L/min, the cumulative ammonia reduction rate was 80.5% for biofilter A and 99.9% for biofilter B. At the aeration rate of 50 L/min(experiment II), the lowest reduction rate showed a negative value of -350% on the 8th and 9th day for biofilter A(residence time 33.9 5), and 50% on the loth day for biofilter B(residence time 67.8s). At the aeration rate of 50 L/min, the cumulative ammonia reduction rate was 82.5% fur biofilter A and 97.4% for biofilter B. Filtering efficiency was influenced by residence time. The moisture content(MC) and total nitrogen(T-N) of the filtering material were increased by absorbing moisture and ammonia included in the exhaust gas, while pH was decreased and total carbon(T-C) remained unchanged during the filtering operation.

• Journal of the Korea Furniture Society
• /
• v.21 no.4
• /
• pp.273-283
• /
• 2010

Structural larger timber have some weak points as like much longer drying time at lower MC(15%), a considerable check developing and the difficulty for the chemicals injection, so it is necessary to develop lighter structural size member for using the new Hanok, heavy timber construction, living necessaries, furniture and industrial goods. The developed skin timber can be a good raw material for those uses. Skin timber is a hollowed timber which be bored out of its considerable cross-sectional area. The intention of this study was the evaluation of compressive capacity of skin timber. Specially, skin timbers which have more than 200mm in sizes were used to analyze the compressive capacity. From the results of this study, the following conclusions have been made: 1. Though considerable inner parts were bored out, both pine skin timber and larch skin timber showed a good compressive capacity to that of non-bored solid timber. 2. According to ASTM, pine skin timber showed various failure types, but Splitting type, Brooming and end rolling type were main failure types for the larch skin timber. 3. Pine skin timber didn't show the significance between cylindrical shape and rectangular shape, but larch skin timber showed the significance between two shapes. Therefore, for the larch skin timber, cylindrical shape and rectangular shape should be used as a column uses and beam uses respectively. 4. Pine skin timber and larch skin timber didn't show the significance on the compressive capacity. There is not much difference of compressive capacity between them, so it can be possible to select on the user convenience.

• Journal of the Korea Furniture Society
• /
• v.28 no.3
• /
• pp.248-258
• /
• 2017

A study was carried out to observe the 1% aqueous safranine solution flow speed in longitudinal and radial directions of softwood Thuja orientalis L., diffuse-porous wood Gmelina arborea Roxb., and ring-porous wood Phellodendron amurense Rupr., Longitudinal flow was considered from bottom to top while the radial flow was considered from bark to pith directions. In radial direction, ray cells and in longitudinal direction tracheids, vessel and wood fiber were considered for the measurement of liquid penetration speed at less than 12% moisture contents(MC). The variation of penetration speed for different species was observed and the reasons behind for this variation were explored. The highest radial penetration depth was found in ray parenchyma of T. orientalis but the lowest one was found in ray parenchyma of P. amurense. The average liquid penetration depth in longitudinal trachied of T. orientalis was found the highest among all the other cells. The penetration depth in fiber of G. arborea was found the lowest among the other longitudinal cells. It was found that cell dimension and also meniscus angle of safranine solution with cell walls were the prime factors for the variation of liquid flow speed in wood. Vessel was found to facilitate prime role in longitudinal penetration for hardwood species. The penetration depth in vessel of G. arborea was found highest among all vessels. Anatomical features like ray parenchyma cell length and diameter, end-wall pits number were found also responsible fluid flow differences. Initially liquid penetration speed was high and the nit gradually decreased in an uneven rate. Liquid flow was captured via video and the penetration depths in those cells were measured. It was found that even in presence of abundant rays in hardwood species, penetration depth of liquid in radial direction of softwood species was found high. Herein the ray length, lumen area, end wall pit diameter determined the radial permeability. On the other hand, vessel and fiber structure affected the longitudinal flow of liquids. Following a go-stop-go cycle, the penetration speed of a liquid decreased over time.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.357-364
• /
• 2007

This experiment was designed to clarify the effect of extracellular glucose on the osteoblasts and periodontal ligament cells. The cells were incubated for 24 and 48 hours with ${\alpha}$-MEM including 1,000 mg/L (control group) and 4,500 mg/L (experimental group) of glucose. Then, the expressions of caspase-3, p38 MAPK, JNK-1, and ERK-1 were examined using Elisa assay and Western blot. The results were as follows: 1. The expression of caspase-3 and p38 MAPK was increased by the high extracellular glucose in both cells. 2. The expression of caspase-3 and p38 MAPK was increased greatly in the periodontal ligament cells than the E1 cells by the high extracellular glucose. 3. The expression of JNK-1 was increased by the high extracellular glucose in both cells. 4. The expression of ERK-1 was not changed by the high extracellular glucose in both cells. These results suggest that extracellular glucose at high concentrations may inhibit the periodontal regeneration process increasing cellular apoptosis. And p38 MAPK and JNK-1 pathway may be the most responsible intracellular pathway rather than ERK-1.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.196-202
• /
• 1997

Perovskite lanthanum doped lead titanate ($(Pb,La)TiO_{3}$ or PLT) thin films were successfully fabricated on Pt/TijSiO.iSi substrates at the temperatures as low as $440~500^{\circ}C$ by eleclron cyclotron resonance plasma-enhanced chemical vapor deposition (ECR PECVII). Since the volatilities of the MC sources arid oxide molecules (especially Ph oxide) increased with increasing deposition temperature, the film deposition rate and the (I'b + La)/'Ti ratio decreased Stoichiometric perovskite PL'T films with good dielectric and leakeage current properties were obtained at the temperatures of $460~480^{\circ}C$. The lanthanum content of the film was nearly directly propotional to $La(DPM)_{3}$ flow rate. As the La/Ti ratio increased from 3.0 to 9.5%, the dielectric constant increased from 360 to 650 and the leakeage current density at 100kV/cm electric field decreased from $4{\times}10^{-5}$ to $4{\times}10_{-8}A/cm^2$.

• Journal of radiological science and technology
• /
• v.37 no.3
• /
• pp.211-221
• /
• 2014

The clinical practices provide the students with a good opportunity to study the practical experiences in their field through the clinical training education in hospital. Now, in this study, comparing the perceptions of the clinic teachers with those of students at the clinical site. The study was conducted to the students attending universities located in Seoul and who finished the clinical practices in 2013. The questionnaires were distributed to the student and collected from them. The study were conducted to 275 questionnaires with frequency analysis, crosstabs, chi-square test and McNemar test. The major motivation was of the select radiography course was high employment rate(44.0%) and the satisfaction of radiography course was general(53.1%). 51.3% of the study answered 8 weeks current duration of clinical practices is proper. The 3-year course students answered that the period of clinical practices would be proper if it is performed in the winter vacation in their second year in college(47.3%). The 4-year course students answered that the first semester in their third years is proper for clinical practices( 27.7%). The students answered that they felt the lack in their knowledge on the professional field(32.4%) during the clinical practices and some of the practical training is different from the education performed at school(68.4%). Most of answered that they were satisfied with the clinical practices and among them they recognized the importance of the clinical practices ($3.94{\pm}0.89$). After the clinical practices, their desire for getting job as a radiography has changed from 84.1% to 82.9%. The reason why they want the job related to the radiation is because the job is stable (changed from 49.0% to 46.0% after the clinical practice) while the reason why they don't want be a radigrapher because that job is not proper for them (changed from 37.0% to 40.7% after the clinical practice) The effort should be made to enhance the position of radiation professionals through the improved education system to the students, rather giving them education for just employment.

• Nutrition Research and Practice
• /
• v.5 no.4
• /
• pp.281-287
• /
• 2011

In this study, we evaluated the antioxidant activity of pine needle extracts prepared with hot water, ethanol, hexane, hot water-hexane (HWH), and hot water-ethanol (HWE), using the DPPH (1,1-diphenyl-2-picrylhydrazyl) radical method. The hot water extract possessed superior antioxidant activity than the other extracts. We also compared the antioxidant activity of pine needle extracts through ROS inhibition activity in a cellular system using MC3T3 E-1 cells. The hot water extract exhibited the lowest ROS production. The pattern of HPLC analysis of each extract indicated that the hot water extract contained the highest proanthocyanidin level. The pine needle hot-water extract was then isolated and fractionated with Sephadex LH-20 column chromatography to determine the major contributor to its antioxidant activity. The No.7 and 12 fractions had high antioxidant activities, that is, the highest contents of proanthocyanidins and catechins, respectively. These results indicate that the antioxidant activity of procyanidins from the hot water extract of pine needles is positively related to not only polymeric proanthocyanidins but also to monomeric catechins. Moreover, the antioxidant activity of the pine needle hot water extract was similar to well-known antioxidants, such as vitamin C. This suggests that pine needle proanthocyanidins and catechins might be of interest for use as alternative antioxidants.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.2
• /
• pp.104-109
• /
• 2017

PURPOSE. The purpose of this study was to evaluate the influence of acid etching treatment on surface characteristics and biological response of glass-infiltrated zirconia. MATERIALS AND METHODS. A hundred zirconia specimens were divided into four groups depending on surface treatments: untreated zirconia (group Z); acid-etched zirconia (group ZE); glass-infiltrated zirconia (group ZG); and glass-infiltrated and acid-etched zirconia (group ZGE). Surface roughness, surface topography, surface morphology, and Vickers hardness of specimens were evaluated. For biological response test, MC3T3-E1 cell attachment and proliferation on surface of the specimens were examined. The data were statistically analyzed using one-way ANOVA and Tukey's HSD test at a significance level of 0.05. RESULTS. Group ZGE showed the highest surface roughness ($Ra=1.54{\mu}m$) compared with other groups (P < .05). Meanwhile, the hardness of group Z was significantly higher than those of other groups (P < .05). Cell attachment and cell proliferation were significantly higher in group ZGE (P < .05). CONCLUSION. We concluded that effective surface roughness on zirconia could be made by acid etching treatment after glass infiltration. This surface showed significantly enhanced osteoblast cell response.