• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.297-304
• /
• 1998

The three analysis methods, EPA method 3050, the method offered by Ministry of Environment in Korea, and modified method corrected in this laboratory, were studied to investigate the effect of matrix on the analysis of inorganic priority pollutants. 7 inorganic priority pollutants(Ni, Cr, Cu, Zn, Pb, Cd, Hg) were spiked to the plating, leather, paper, electric, and dye sludges. Mean recovery of the elements except Hg was 95.5% when the procedure of EPA method was applied. However, recovery by the two other extraction methods showed 11.1% and 27.7%, respectively. Digestions were done by MDS (microwave digestion system) and $HNO_3+HClO_4$ methods. To study organic and inorganic matrix effect, samples were made by adding triethanol amine as a organic matrix and $FeCl_3{\cdot}6H_2O$+$AlCl_3{\cdot}6H_2O$ as a inorganic matrix, respectively. The extracts were analyzed by AAS and HG-AAS. Mean recovery of the elements by the $HNO_3+HClO_4$ procedure, except Hg, gave better result than that of the MDS method. Mean recovery of elements was decreased when organic and inorganic matrices were added in the sludge samples. The procedure of MDS and $HNO_3+HClO_4$ digestion gave higher recoveries than that of direct analysis. In general, the results of the studies showed a significant matrix effect on the inorganic priority pollutants analysis in sludges.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.557-562
• /
• 2005

Low-density parity-check (LDPC) codes have recently emerged due to their excellent performance. However, the parity check (H) matrices of the previous works are not adequate for hardware implementation of encoders or decoders. This paper proposes a hybrid parity check matrix which is efficient in hardware implementation of both decoders and encoders. The hybrid H-matrices are constructed so that both the semi-random technique and the partly parallel structure can be applied to design encoders and decoders. Using the proposed methods, the implementation of encoders can become practical while keeping the hardware complexity of the partly parallel decoder structures. An encoder and a decoder are designed using Verilog-HDL and are synthesized using a $0.35 {\mu}m$ CMOS standard cell library.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.18-27
• /
• 1997

Al 6061 alloy reinforced with 10 vol.% ${\delta}-Al_2O_3$ short fiber was fabricated by Rheo-compocasting and squwwze cating. Extrusion processings were performed at temperatures from 40$0^{\circ}C$ to 55$0^{\circ}C$ with various extrusion ratio for curved shape dies. In proportion to the increase of extrusion ratios and temperatures, ultimate tensile strength for extruded materials improved. SEM observation of fractured surfsce was capcble oof accounting for fracture mechanism and bounding state of fiber and matrix.

• Journal of Engineering Education Research
• /
• v.13 no.2
• /
• pp.22-27
• /
• 2010

From a lot of survey, it is obvious that most students in universities lose their desire for learning just after entering their universities. In order to solve this problem, we developed a novel educational tool for the students, named "The thinking method based on matrix diagram". If they try hard with the help of this tool, they will be able to learn how to design and manage their splendid university lives in addition to get the basic knowledge and to improve their basic abilities. It is also found that they can earn the shared knowledge mutually after learning a common method, which supports to make them to improve their communication abilities drastically.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.27.4-27
• /
• 2001

A stabilizing control method for linear systems with model uncertainties and hard input constraints is developed, which does not require on-line optimizations. This work is motivated by the constrained robust MPC(CRMPC) approach [3] which adopts the dual mode prediction strategy (i.e. free control moves and invariant set) and minimizes a worst case performance criterion. Based on the observation that, a feasible control sequence for a particular state can be found as a linear combination of feasible sequences for other states, we suggest a stabilizing control algorithm providing sub-optimal and feasible control sequences using pre-computed optimal sequences for some canonical states. The on-line computation of the proposed method reduces to simple matrix multiplication.

• Tribology and Lubricants
• /
• v.12 no.4
• /
• pp.18-27
• /
• 1996

An interlaboratory wear testing was performed in order to understand the friction behaviors and the wear mechanisms of the sintered composites. The specimens were the sintered bronze matrix composites having various contents of friction additives, friction control agents and reinforcements. The variation of the wear characteristics according to the constituents of the composites as well as the wear conditions was investigated by SEM, EPMA, OM, the hardness testing and the measurement of friction. The specimen having glass fiber as the matrix reinforcement showed a remarkable increase in wear resistance as increasing the content of glass fiber. Graphite particles in the composites exhibited the lubricating effect and also resulted in the lowering strength of the matrix. Addition of Mo powder to the composites led to the deterioration of wear properties at the room temperature, however, an enhanced wear properties were obtained in the containing Mo at an elevated temperature.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.20-27
• /
• 2010

In this paper, we presented a signal model of STAP and actual environment of clutter. The novel estimation method of clutter covariance matrix using median value is proposed to overcome serious performance degradation after NHD in nonhomogeneous clutter. Eigen value characteristic is improved through diagonal loading. Target detection ability and SINR loss of the proposed method though MSMI statistic is also compared with conventional method using average value. The simulation results, confirm the proposed method has better performance than others.

• Communications of the Korean Mathematical Society
• /
• v.10 no.1
• /
• pp.27-34
• /
• 1995

For an $n \times n$ matrix $A = [a_{ij}]$, the permanent of A, per A, is defined by $$ per(A) = \sum_{\sigma}{a_{1 \simga(1)} \cdots a_{n \sigma(n)}}, $$ where $\sigma$ runs over all permutations of ${1,\cdots,n}.

• Journal of applied mathematics & informatics
• /
• v.27 no.3_4
• /
• pp.963-980
• /
• 2009

In this paper, spectral scheme based on Hermite interpolation for solving partial differential equations is presented. The idea of this Hermite spectral method comes from the spectral method on arbitrary grids of Carpenter and Gottlieb [J. Comput. Phys. 129(1996) 74-86] using the Lagrange interpolation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.20-27
• /
• 2020

In general, a nonlinear system is linearized in the form of a multiplication of the 1st and 2nd order system. This paper reports a design method of a weighting matrix and control law of LQ control to move the double poles that have a Jordan block to a pair of complex conjugate poles. This method has the advantages of pole placement and the guarantee of stability, but this method cannot position the poles correctly, and the matrix is chosen using a trial and error method. Therefore, a relation function (𝜌, 𝜃) between the poles and the matrix was derived under the condition that the poles are the roots of the characteristic equation of the Hamiltonian system. In addition, the Pole's Moving-range was obtained under the condition that the state weighting matrix becomes a positive semi-definite matrix. This paper presents examples of how the matrix and control law is calculated.