• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.985-989
• /
• 1990

This paper presents a fundamental study of a millimeter-sized master-slave robot driven by conduit-guided wires, which is expected to be applied to the delicate surgical operations, the assembling precise and small parts and so on. This system consists of a millimeter-sized slave robot and a master manipulator of which the size is adapted to a human finger. Displacement and torque of the master side can be reduced and transferred to the slave robot by controlling the motor torque against the master torque by feeding back tension signals. The master can feel the tensions by the motor torque. In this paper, the design method and making process of the master-slave system and the dynamical characteristic of displacement and torque control are proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.8
• /
• pp.951-958
• /
• 2011

In this paper, the purpose is to investigate the vibration characteristics and the design of resonance avoidance of the unmanned helicopter master. Based on the Euler-Bernoulli beam theory for helicopter master, the equation of motion is derived by using extended Hamilton's principle. It was studied about the natural frequency of helicopter master as the design variances(tip mass, length and diameter of master). Also, it was compared the theoretical results for natural frequency with the results of FE analysis. The results of this study showed the vibration characteristics of helicopter master for the design of resonance avoidance.

• Journal of the Korean Ceramic Society
• /
• v.42 no.10 s.281
• /
• pp.645-648
• /
• 2005

To fabricate a (100) silicon hard master, we used anisotropic wet etching for the embossing. The etching chemical for the sili­con wafer was a TMAH 25$\%$ solution. The anisotropic wet etching produces a smooth sidewall surface inclined at 54.7°, and the surface roughness of the fabricated master is about 1 nm. After spin coating an organic-inorganic sol-gel hybrid resin on a silicon substrate, we used the fabricated master to form patterns on the silicon substrate. Thus, we successfully obtained patterns via the hot embossing technique with the (100) silicon hard master. Moreover, by using a single hydrophobic surface treatment of the master, we succeeded in achieving uniform surface roughness of the embossed patterns for more than ten embossments.

• Journal of Information Technology Applications and Management
• /
• v.20 no.4
• /
• pp.83-95
• /
• 2013

This study aims to analyze factors that affect satisfaction of students in employment-contract information technology master programs, and suggest policy implications to improve management of employment-contract master programs. A survey of students supported by Software master program of National IT Industry Promotion Agency (NIPA) and Knowledge Information Security master program of Korea Internet and Security Agency (KISA) indicates that department administration, department vision, scholarship, adviser, and lecturer affect satisfaction of students in employment-contract master programs in listed order.

• Journal of the Korean Institute of Educational Facilities
• /
• v.18 no.1
• /
• pp.3-10
• /
• 2011

Recently, an active relation between the University and city has become an issue of increasing importance in the field of campus planning. Campus master plan is known as long range development plan, and is not simply an abstract drawing work but definite scaling work procedure. The purpose of this paper is to examine the planning process and relation between university and the region through master plan of master plan of D University and K University which located in Seoul city. From the research which sees master plan of D universities which are presented in existing an instance and K universities master plan did the service blueprint with base and investigated. And both university currently analyzed the situation which is being placed and grasps a problem point, presented that alternative with what kind of method.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.131-136
• /
• 2021

EtherCAT is an Ethernet-based fieldbus system standardized in IEC 61158 and SEMI, and widely used in the fields of factory automation, semiconductor equipment and robotics. In this paper, a real-time EtherCAT master is implemented on Linux operating systems and its performances are evaluated. To enhance the real-time capability of mainline Linux kernel, Xenomai is applied as a real-time framework and an open source EtherCAT master stack, Simple Open EtherCAT Master (SOEM), is installed on it. Unlike other studies, the real-time performance of the EtherCAT master is evaluated at the output of the network interface card, so that the evaluation results include all possible effects from the EtherCAT master system. The implemented EtherCAT master can send and receive packets up to 20KHz control frequency with low jitter, even in stressed condition.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1293-1296
• /
• 1997

We investigate a design methodology for master arm which is employed in remote-site control. Though counter-balancing has been employed for the purpose of lessening the actuator loads, it results in the increase of dynamic load at the task position. Therefore, there exist a trade-off between counter-balacing and dynamic performance. The concept of a composite index is introduced to simulataneously consider those two effects in the design of master arms. Several alternative designs of master arms are suggested.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.481-484
• /
• 2003

In this study, we fabricated the master metallic nano-stamper with nano pillar patterns to apply replication processes which is adequate for mass production. Master nano patterns with various hole diameters between 300 nm and 1000 nm was fabricated by e-beam lithography. After the seed layer was deposited on the master nano patterns using e-beam evaporation, the nickel was electroformed. In each step, the shape and surface roughness of their patterns were analyzed using SEM and AFM.

• Speech Sciences
• /
• v.11 no.4
• /
• pp.143-150
• /
• 2004

This study was done to compare thresholds between those of Auditory Brainstem Response (ABR) with clicks or tonebursts and Multiple Auditory Steady-State Response (MASTER). The results would give a promising tool for evaluating frequency-specific hearing sensitivity in infants or young children. The correlation coefficient value between the click ABR thresholds and MASTER thresholds at carrier frequencies, 500, 1,000, 2,000 Hz, and 4,000 Hz was obtained at Pearson 0.91, 0.94, 0.93, and 0.91.

• Journal of the Korean Institute of Educational Facilities
• /
• v.15 no.5
• /
• pp.5-12
• /
• 2008

The purpose of this study is to suggest a design guideline for the domestic campus master plan. The main contents of this study are as follows ; 1) Study for the characteristics and components of the comprehensive campus master plan. 2) Case study on the domestic campus plan 3) Establishment of methods for campus master plan focused on the space programming, land use planning, circulation planning, and building layout planning.